journal article·2015-09

Damage resistance in gum metal through cold work-induced microstructural heterogeneity

J.-L. Zhang, C. C. Tasan, M. L. Lai, J. Zhang, D. Raabe

Journal of Materials Science· Volume 50· Issue 17
Publisher page

Abstract

Cold-worked alloys exhibit high strength, but suffer from limited ductility. In contrast, Ti-based gum metal was reported to exhibit high strength combined with good ductility upon severe pre-straining. Motivated by this anomaly, we systematically studied the evolution of gum metal microstructure during severe cold working (swaging and rolling) and the resulting deformation and damage micro-mechanical mechanisms during follow-up tensile deformation. To this end, various experimental in situ and post-mortem methodologies are employed, including scanning electron microscopy imaging, high-resolution electron backscatter diffraction mapping and transmission electron microscopy. These observations reveal that intense grain refinement takes place through dislocation plasticity-dominated deformation banding upon cold working. The observed enhancement in crack blunting and failure resistance which prolongs the post-necking ductility of gum metal during follow-up tensile straining can be attributed to the deformation-induced development of local heterogeneities in texture and grain size.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. Saito T, Furuta T, Hwang JH, Kuramoto S, Nishino K, Suzuki N, Chen R, Yamada A, Ito K, Seno Y, Nonaka T, Ikehata H, Nagasako N, Iwamoto C, Ikuhara Y, Sakuma T (2003) Multifunctional alloys obtained via a dislocation-free plastic deformation mechanism. Science 300(5618):464–467. doi: 10.1126/science.108195710.1126/science.1081957 ↗
2. Talling RJ, Dashwood RJ, Jackson M, Dye D (2009) On the mechanism of superelasticity in gum metal. Acta Mater 57(4):1188–1198. doi: 10.1016/j.actamat.2008.11.01310.1016/j.actamat.2008.11.013 ↗
3. Morris JW, Hanlumyuang Y, Sherburne M, Withey E, Chrzan DC, Kuramoto S, Hayashi Y, Hara M (2010) Anomalous transformation-induced deformation in 〈1 1 0〉 textured gum metal. Acta Mater 58(9):3271–3280. doi: 10.1016/j.actamat.2010.02.00110.1016/j.actamat.2010.02.001 ↗
4. Tane M, Akita S, Nakano T, Hagihara K, Umakoshi Y, Niinomi M, Mori H, Nakajima H (2010) Low Young’s modulus of Ti–Nb–Ta–Zr alloys caused by softening in shear moduli c′ and c(44) near lower limit of body-centered cubic phase stability. Acta Mater 58(20):6790–6798. doi: 10.1016/j.actamat.2010.09.00710.1016/j.actamat.2010.09.007 ↗
5. Tane M, Nakano T, Kuramoto S, Hara M, Niinomi M, Takesue N, Yano T, Nakajima H (2011) Low Young’s modulus in Ti–Nb–Ta–Zr–O alloys: cold working and oxygen effects. Acta Mater 59(18):6975–6988. doi: 10.1016/j.actamat.2011.07.05010.1016/j.actamat.2011.07.050 ↗
6. Kuramoto S, Furuta T, Hwang JH, Nishino K, Saito T (2006) Plastic deformation in a multifunctional Ti–Nb–Ta–Zr–O alloy. Metallurg Mater Trans A 37A(3):657–662. doi: 10.1007/s11661-006-0037-710.1007/s11661-006-0037-7 ↗
7. Gutkin MY, Ishizaki T, Kuramoto S, Ovid’ko IA (2006) Nanodisturbances in deformed gum metal. Acta Mater 54(9):2489–2499. doi: 10.1016/j.actamat.2006.0110.1016/j.actamat.2006.01.027 ↗
8. Gutkin MY, Ishizaki T, Kuramoto S, Ovid’ko IA, Skiba NV (2008) Giant faults in deformed gum metal. Int J Plast 24(8):1333–1359. doi: 10.1016/j.ijplas.2007.09.00910.1016/j.ijplas.2007.09.009 ↗
9. Guo W, Quadir MZ, Moricca S, Eddows T, Ferry M (2013) Microstructural evolution and final properties of a cold-swaged multifunctional Ti–Nb–Ta–Zr–O alloy produced by a powder metallurgy route. Mater Sci Eng A 575:206–216. doi: 10.1016/j.msea.2013.03.02910.1016/j.msea.2013.03.029 ↗
10. Tane M, Nakano T, Kuramoto S, Niinomi M, Takesue N, Nakajima H (2013) Omega transformation in cold-worked Ti–Nb–Ta–Zr–O alloys with low body-centered cubic phase stability and its correlation with their elastic properties. Acta Mater 61(1):139–150. doi: 10.1016/j.actamat.2012.09.04110.1016/j.actamat.2012.09.041 ↗
11. Danno A, Wong CC, Tong S, Jarfors A, Nishino K, Furuta T (2010) Effect of cold severe deformation by multi directional forging on elastic modulus of multi functional Ti + 25 mol% (Ta, Nb, V) plus (Zr, Hr, O) alloy. Mater Des 31:S61–S65. doi: 10.1016/j.matdes.2009.11.00710.1016/j.matdes.2009.11.007 ↗
12. Premkumar M, Himabindu VS, Banumathy S, Bhattacharjee A, Singh AK (2012) Effect of mode of deformation by rolling on texture evolution and yield locus anisotropy in a multifunctional beta titanium alloy. Mater Sci Eng A 552:15–23. doi: 10.1016/j.msea.2012.04.07710.1016/j.msea.2012.04.077 ↗
13. Furuta T, Hara M, Horita Z, Kuramoto S (2009) Severe plastic deformation in gum metal with composition at the structural stability limit. Int J Mater Res 100(9):1217–1221. doi: 10.3139/146.11018410.3139/146.110184 ↗
14. Furuta T, Kuramoto S, Hwang J, Nishino K, Saito T (2005) Elastic deformation behavior of multi-functional Ti–Nb–Ta–Zr–O alloys. Mater Trans 46(12):3001–3007. doi: 10.2320/matertrans.46.300110.2320/matertrans.46.3001 ↗
15. Besse M, Castany P, Gloriant T (2011) Mechanisms of deformation in gum metal TNTZ-O and TNTZ titanium alloys: a comparative study on the oxygen influence. Acta Mater 59(15):5982–5988. doi: 10.1016/j.actamat.2011.06.00610.1016/j.actamat.2011.06.006 ↗
16. Castany P, Besse M, Gloriant T (2011) Dislocation mobility in gum metal beta-titanium alloy studied via in situ transmission electron microscopy. Phys Rev B 84(2):020201. doi: 10.1103/PhysRevB.84.02020110.1103/PhysRevB.84.020201 ↗
17. Humphreys FJ, Hatherly M (2004) Recrystallization and related annealing phenomena. Elsevier, Oxford
18. Hughes DA, Hansen N (1997) High angle boundaries formed by grain subdivision mechanisms. Acta Mater 45(9):3871–3886. doi: 10.1016/s1359-6454(97)00027-x10.1016/S1359-6454(97)00027-X ↗
19. Wang YM, Chen MW, Sheng HW, Ma E (2002) Nanocrystalline grain structures developed in commercial purity Cu by low-temperature cold rolling. J Mater Res 17(12):3004–3007. doi: 10.1557/jmr.2002.043610.1557/JMR.2002.0436 ↗
20. Valiev R (2004) Nanostructuring of metals by severe plastic deformation for advanced properties. Nat Mater 3(8):511–516. doi: 10.1038/nmat118010.1038/nmat1180 ↗
21. Valiev RZ, Islamgaliev RK, Alexandrov IV (2000) Bulk nanostructured materials from severe plastic deformation. Prog Mater Sci 45(2):103–189. doi: 10.1016/s0079-6425(99)00007-910.1016/S0079-6425(99)00007-9 ↗
22. Yang Y, Wu SQ, Li GP, Li YL, Lu YF, Yang K, Ge P (2010) Evolution of deformation mechanisms of Ti–22.4Nb–0.73Ta–2Zr–1.34O alloy during straining. Acta Mater 58(7):2778–2787. doi: 10.1016/j.actamat.2010.01.01510.1016/j.actamat.2010.01.015 ↗
23. Raabe D, Lücke K (1994) Rolling and annealing textures of BCC metals. In: Bunge HJ (ed) Proceedings of the 10th international conference on textures of materials, Pts 1 and 2—Icotom-10, vol 157., Mater sci forumTranstec Publications Ltd, Zurich-Uetikon, pp 597–610
24. Raabe D (1995) Simulation of rolling textures of b.c.c. metals considering grain interactions and crystallographic slip on {110}, {112} and {123} planes. Mater Sci Eng, A 197(1):31–37. doi: 10.1016/0921-5093(94)09770-410.1016/0921-5093(94)09770-4 ↗
25. Sander B, Raabe D (2008) Texture inhomogeneity in a Ti-Nb-based beta-titanium alloy after warm rolling and recrystallization. Mater Sci Eng A 479(1–2):236–247. doi: 10.1016/j.msea.2007.06.07710.1016/j.msea.2007.06.077 ↗
26. Giannuzzi LA, Stevie FA (eds) (2005) Introduction to focused ion beams: instrumentation, theory, techniques and practice. Springer, New York
27. Raabe D, Ohsaki S, Hono K (2009) Mechanical alloying and amorphization in Cu–Nb–Ag in situ composite wires studied by transmission electron microscopy and atom probe tomography. Acta Mater 57(17):5254–5263. doi: 10.1016/j.actamat.2009.07.02810.1016/j.actamat.2009.07.028 ↗
28. Zelin M (2002) Microstructure evolution in pearlitic steels during wire drawing. Acta Mater 50(17):4431–4447. doi: 10.1016/s1359-6454(02)00281-110.1016/S1359-6454(02)00281-1 ↗
29. Roters F, Eisenlohr P, Hantcherli L, Tjahjanto DD, Bieler TR, Raabe D (2010) Overview of constitutive laws, kinematics, homogenization and multiscale methods in crystal plasticity finite-element modeling: theory, experiments, applications. Acta Mater 58(4):1152–1211. doi: 10.1016/j.actamat.2009.10.05810.1016/j.actamat.2009.10.058 ↗
30. Raabe D, Zhao Z, Park SJ, Roters F (2002) Theory of orientation gradients in plastically strained crystals. Acta Mater 50(2):421–440. doi: 10.1016/s1359-6454(01)00323-810.1016/S1359-6454(01)00323-8 ↗
31. Banerjee S, Tewari R, Dey GK (2006) Omega phase transformation—morphologies and mechanisms. Int J Mater Res 97(7):963–97710.3139/146.101327 ↗
32. Yang Y, Li GP, Cheng GM, Li YL, Yang K (2009) Multiple deformation mechanisms of Ti–22.4Nb–0.73Ta–2.0Zr–1.34O alloy. Appl Phys Lett 94(6):3. doi: 10.1063/1.3078521
33. Yano T, Murakami Y, Shindo D, Hayasaka Y, Kuramoto S (2010) Transmission electron microscopy studies on nanometer-sized omega phase produced in gum metal. Scr Mater 63(5):536–539. doi: 10.1016/j.scriptamat.2010.05.02510.1016/j.scriptamat.2010.05.025 ↗
34. Raabe D, Sander B, Friák M, Ma D, Neugebauer J (2007) Theory-guided bottom-up design of β-titanium alloys as biomaterials based on first principles calculations: theory and experiments. Acta Mater 55(13):4475–4487. doi: 10.1016/j.actamat.2007.04.02410.1016/j.actamat.2007.04.024 ↗
35. Plancher E, Tasan CC, Sandloebes S, Raabe D (2013) On dislocation involvement in Ti–Nb gum metal plasticity. Scr Mater 68(10):805–808. doi: 10.1016/j.scriptamat.2013.01.03410.1016/j.scriptamat.2013.01.034 ↗
36. Jin M, Minor AM, Stach EA, Morris JW (2004) Direct observation of deformation-induced grain growth during the nanoindentation of ultrafine-grained Al at room temperature. Acta Mater 52(18):5381–5387. doi: 10.1016/j.actamat.2004.07.04410.1016/j.actamat.2004.07.044 ↗
37. Soer WA, De Hosson JTM, Minor AM, Morris JW, Stach EA (2004) Effects of solute Mg on grain boundary and dislocation dynamics during nanoindentation of Al–Mg thin films. Acta Mater 52(20):5783–5790. doi: 10.1016/j.actamat.2004.08.03210.1016/j.actamat.2004.08.032 ↗
38. Zhang F, Bower AF, Mishra RK, Boyle KP (2009) Numerical simulations of necking during tensile deformation of aluminum single crystals. Int J Plast 25(1):49–69. doi: 10.1016/j.ijplas.2007.12.00610.1016/j.ijplas.2007.12.006 ↗
39. Hutchinson JW, Neale KW (1977) Influence of strain-rate sensitivity on necking under uniaxial tension. Acta Metall 25(8):839–846. doi: 10.1016/0001-6160(77)90168-710.1016/0001-6160(77)90168-7 ↗
40. Joshi VA (2006) Titanium alloys—an atlas of structures and fracture features. Taylor & Francis Group, Boca Raton10.1201/9781420006063 ↗
41. Sandim HRZ, Padilha AF, Randle V, Blum W (1999) Grain subdivision and recrystallization in oligocrystalline tantalum during cold swaging and subsequent annealing. Int J Refract Met Hard Mater 17(6):431–435. doi: 10.1016/S0263-4368(99)00035-910.1016/S0263-4368(99)00035-9 ↗
42. Kuhlmann-Wilsdorf D (1999) Overview no. 131—”Regular” deformation bands (DBs) and the LEDS hypothesis. Acta Mater 47(6):1697–1712. doi: 10.1016/s1359-6454(98)00413-310.1016/S1359-6454(98)00413-3 ↗
43. Bay B, Hansen N, Hughes DA, Kuhlmann-Wilsdorf D (1992) Overview no. 96 evolution of f.c.c. deformation structures in polyslip. Acta Metall Mater 40(2):205–219. doi: 10.1016/0956-7151(92)90296-Q10.1016/0956-7151(92)90296-Q ↗
44. Gottstein G (2004) Physical foundations of materials science. Springer, Heidelberg10.1007/978-3-662-09291-0 ↗
45. Jia N, Roters F, Eisenlohr P, Raabe D, Zhao X (2013) Simulation of shear banding in heterophase co-deformation: example of plane strain compressed Cu–Ag and Cu–Nb metal matrix composites. Acta Mater 61(12):4591–4606. doi: 10.1016/j.actamat.2013.04.02910.1016/j.actamat.2013.04.029 ↗
46. Lins JFC, Sandim HRZ, Kestenbach H, Raabe D, Vecchio KS (2007) A microstructural investigation of adiabatic shear bands in an interstitial free steel. Mater Sci Eng A 457(1–2):205–218. doi: 10.1016/j.msea.2006.12.01910.1016/j.msea.2006.12.019 ↗
47. Hao YL, Zhang ZB, Li SJ, Yang R (2012) Microstructure and mechanical behavior of a Ti–24Nb–4Zr–8Sn alloy processed by warm swaging and warm rolling. Acta Mater 60(5):2169–2177. doi: 10.1016/j.actamat.2012.01.00310.1016/j.actamat.2012.01.003 ↗
48. Lütjering G, Williams JC (2007) Titanium, 2nd edn. Springer, Heidelberg
49. Zhao YH, Guo YZ, Wei Q, Topping TD, Dangelewicz AM, Zhu YT, Langdon TG, Lavernia EJ (2009) Influence of specimen dimensions and strain measurement methods on tensile stress-strain curves. Mater Sci Eng A 525(1–2):68–77. doi: 10.1016/j.msea.2009.06.03110.1016/j.msea.2009.06.031 ↗
50. Valiev R (2002) Materials science—nanomaterial advantage. Nature 419(6910):887–889. doi: 10.1038/419887a10.1038/419887a ↗
51. Valiev RZ, Alexandrov IV, Zhu YT, Lowe TC (2002) Paradox of strength and ductility in metals processed by severe plastic deformation. J Mater Res 17(1):5–8. doi: 10.1557/jmr.2002.000210.1557/JMR.2002.0002 ↗
52. Spielmannová A, Landa M, Machová A, Haušild P, Lejček P (2007) Influence of crack orientation on the ductile–brittle behavior in Fe–3 wt% Si single crystals. Mater Charact 58(10):892–900. doi: 10.1016/j.matchar.2006.09.00110.1016/j.matchar.2006.09.001 ↗
53. Uhnáková A, Machová A, Hora P (2011) 3D atomistic simulation of fatigue behavior of a ductile crack in bcc iron. Int J Fatigue 33(9):1182–1188. doi: 10.1016/j.ijfatigue.2011.02.01110.1016/j.ijfatigue.2011.02.011 ↗
54. Antolovich SD, Armstrong RW (2014) Plastic strain localization in metals: origins and consequences. Prog Mater Sci 59:1–160. doi: 10.1016/j.pmatsci.2013.06.00110.1016/j.pmatsci.2013.06.001 ↗
55. Bobylev SV, Morozov NF, Ovid’ko IA (2010) Cooperative grain boundary sliding and migration process in nanocrystalline solids. Phys Rev Lett 105(5):4. doi: 10.1103/PhysRevLett.105.05550410.1103/PhysRevLett.105.055504 ↗
56. Li J, Soh AK (2013) Toughening of nanocrystalline materials through shear-coupled migration of grain boundaries. Scr Mater 69(4):283–286. doi: 10.1016/j.scriptamat.2013.04.01410.1016/j.scriptamat.2013.04.014 ↗
57. Morozov NF, Ovid’ko IA, Sheinerman AG, Aifantis EC (2010) Special rotational deformation as a toughening mechanism in nanocrystalline solids. J Mech Phys Solids 58(8):1088–1099. doi: 10.1016/j.jmps.2010.04.00310.1016/j.jmps.2010.04.003 ↗
58. Liu Y, Zhou J, Shen TD, Hui D (2011) Grain rotation dependent fracture toughness of nanocrystalline materials. Mater Sci Eng A 528(25–26):7684–7687. doi: 10.1016/j.msea.2011.06.03510.1016/j.msea.2011.06.035 ↗