journal article·2000-06

Effect of halogen purification and heat treatment on thermal conductivity of high porosity carbon/carbon composite thermal insulation

R. I. Baxter, N. Iwashita, Y. Sawada

Journal of Materials Science· Volume 35· Issue 11
Publisher page

Abstract

Thermal conductivity of a highly porous carbon/carbon composite, known as carbon bonded carbon fiber (CBCF) and used as thermal insulation, was measured and related to the structure investigated by optical microscopy, x-ray diffraction and Raman spectroscopy. It was found that halogen purification of CBCF, that involves heat treatment in chlorine atmosphere, did not result in a greater extent of structural development than heat treatment at the same temperature for the same time in inert atmosphere (unpurified sample). The thermal conductivity of CBCF, both halogen purified and unpurified, was found to increase with temperature in the measured range 1000°C to 2200°C. The experimental thermal conductivity values were in good agreement with those calculated from a model that indicated that in CBCF solid heat transfer was dominant, compared to radiation heat transfer, even at 2200°C. The matrix in CBCF was found to be relatively graphitic as a result of stress orientation on carbonization and as matrix was observed along the fiber length it was tentatively suggested that it may contribute to the effective axial conductivity of the fibers.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Aerogels and thermal insulation · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. G. C. Wei and J. M. Robbins, Amer. Ceram. Bull. 64 (1985) 691.
2. I. J. Davies and R. D. Rawlings, J. Mater. Sci. 29 (1994) 338.10.1007/BF01162488 ↗
3. R. I. Baxter and R. D. Rawlings, Mater. Sci. and Technol. 4 (1998) 161.10.1179/mst.1998.14.2.161 ↗
4. I. J. Davies and R. D. Rawlings, Composites 25 (1994) 229.10.1016/0010-4361(94)90021-3 ↗
5. R. D. Rawlings Idem., Carbon 32 (1994) 1449.10.1016/0008-6223(94)90139-2 ↗
6. S. D. Ellacott, M.Sc. thesis, University of Surrey, Guildford, UK, 1994.
7. I. J. Davies and R. D. Rawlings, Compos. Sci. Technol. 59 (1999) 97.10.1016/S0266-3538(98)00059-1 ↗
8. R. I. Baxter and R. D. Rawlings, J. Mater. Sci. 32 (1997) 4485.10.1023/A:1018656814398 ↗
9. T. G. Godfrey, D. L. Mcelroy and Z. L. ARDARY, Nuclear Technol. 22 (1974) 94.10.13182/NT74-A16278 ↗
10. A. B. Donaldson, in Proceedings of Heat Transfer Conference, Atlanta, August 1973, paper 73-HT-44.
11. R. I. Baxter, R. D. Rawlings, N. Iwashita and Y. Sawada, accepted to Carbon, Dec. 1998. 12. DEGASSA company information sheet, Germany, February 1989.
12. R. I. Baxter, PhD thesis, University of London, 1996.
13. T. Noda and M. Inagaki, Carbon 2 (1964) 127.10.1016/0008-6223(64)90052-1 ↗
14. T. Suzuki and K. Kaneko, ibid. 26 (1988) 743.10.1016/0008-6223(88)90078-4 ↗
15. P. M. Adams, H. A. Katzman, G. S. Rellick and G. W. Stupian, ibid. 26 (1998) 233.10.1016/S0008-6223(97)00189-9 ↗
16. ASTM Designation E1461-92.
17. R. E. Taylor, High temperatures-High pressures 11 (1979) 43.
18. R. D. Cowan, J. Appl. Phys. 34 (1963) 926.10.1063/1.1729564 ↗
19. CALCARB company internal report, Scotland, September 1990.
20. B. D. Cullity, “Elements of x-ray diffraction” 2nd ed. (Addison-Wesley Co., USA, 1978) p. 87, 102.
21. K. Agoni, Carbon 31 (1993) 537.10.1016/0008-6223(93)90106-K ↗
22. E. Fitzer and L. M. Manocha, “Carbon reinforced and carbon/ carbon composites” (Springer-Verlag, Germany, 1998) p. 166.10.1007/978-3-642-58745-0 ↗
23. G. M. Jenkins and K. Kawamura, “Polymeric carbons, carbon fiber, glass and char” (Cambridge University Press, UK, 1976).
24. M. A. Short and P. L. Walker, Carbon 1 (1963) 3.10.1016/0008-6223(63)90003-4 ↗
25. B. K. Larkin and S. W. Churchill, AIChE Journal 5 (1959) 467.10.1002/aic.690050413 ↗
26. N. E. Hager and R. C. Steere, J. Appl. Phys. 38 (1967) 4633.10.1063/1.1709200 ↗
27. M. S. Dresselhaus, G. Dresselhaus, K. Sugihara, I. L. Spain and H. A. Goldberg, “Graphite fibers and filaments” (Springer-Verlag, Berlin, 1988) p. 98.10.1007/978-3-642-83379-3 ↗
28. F. Tuinstra and J. L. Koenig, J. Compos. Mater. 4 (1970) 492.10.1177/002199837000400405 ↗
29. T. C. Chieu, M. S. Dresselhaus and M. Endo, Physical Review B 26 (1982) 5867.10.1103/PhysRevB.26.5867 ↗
30. C. Y. Ho, R. W. Powell and P. E. Liley, J. Physical and Chemical reference data 1 (1972) 317.
31. R. W. Powell and P. E. Liley Idem., ibid. 1 (1972) 308.
32. G. Savage, “Carbon-carbon composites” (Chapman and Hall, London, 1993) p. 311.10.1007/978-94-011-1586-5 ↗
33. C. Y. Ho, R. W. Powell and P. E. Liley, J. Physical and Chemical reference data 1 (1972) 323.