journal article·2002-06

Preparation of SiC-based cellular substrate by pressure-pulsed chemical vapor infiltration into honeycomb-shaped paper preforms

Y. Ohzawa, K. Nakane, V. Gupta, T. Nakajima

Journal of Materials Science· Volume 37· Issue 12
Publisher page

Abstract

Using a pressure-pulsed chemical vapor infiltration technique, SiC was infiltrated from a SiCl4 (4%)–CH4 (4%)–H2 gas phase into carbonized paper preforms at 1100°C. SiC-based cellular substrates with cell wall thicknesses of 25, 50 and 100 μm were obtained by using honeycomb-shaped paper preforms as the templates. The reduction of both wall thickness t and cell pitch d of SiC-based honeycomb substrate successfully led to an increase in geometric surface area per unit volume S, keeping pressure drop ΔP at constant, besides; ΔP decreased without lowering S by the reduction of t and the increase in d. The pressure drop in the prepared honeycomb substrates depended on S 2α−3 value, where α was open frontal area fraction. The compressive strength of the honeycomb substrates with t of 25 μm was about 7 MPa. The strength increased in proportion with 1 − α, which corresponded to the volume fraction of the cell wall in the honeycomb substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Cellulose Research Studies · Natural Fiber Reinforced Composites · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. K. UMEHARA, T. YAMADA, T. HIJIKATA, Y. ICHIKAWA and F. KATSUBE, SAE Paper 971029 (1997) 115.
2. P. GALVERT, Mater. Res. Soc. Bull. 17 (1992) 36.
3. H. SIEBER, A. KAINDL, D. SCHWARZE, J. P. WERNER and P. GREIL, CFI/Ber. DKG 77 (2000) 21.
4. F. CHERISTIN, R. NASLAIN and C. BERNARD, in Proceedings of the 5th International Conference on CVD, edited by T. O. Sedgwick and H. Lyoltin (Electrochemical Society, New Jersey, 1979) p. 499.
5. I. GOLECKI, in Proceedings of the 13th International Conference on CVD, edited by T. M. Besmann, M. D. Allendorf, McD. Robinson and R. K. Ulrich (Electrochemical Society, NewJersey, 1996) p. 547.
6. R. NASLAIN, J. Alloy Compd. 188 (1992) 42.10.1016/0925-8388(92)90641-L ↗
7. O. P. S. DUGNE, A. GUETTE, R. NASLAIN, R. FOURMEAUX, Y. KHIN, J. SEVELY, J. P. ROCHER and J. COTTERET, J. Mater. Sci. 28 (1993) 3409.10.1007/BF01159815 ↗
8. T. M. BESMANN, R. A. LOWDEN, B. W. SHELDON and D. P. STINTON, in Proceedings of the 11th International Conference on CVD, edited by K. E. Spear and G.W. Cullen (Electrochemical Society, New Jersey, 1990) p. 482.
9. T. M. BESMANN, J. C. McLAUGHLIN and H. T. LIN, J. Nucl. Mater. 219 (1995) 31.10.1016/0022-3115(94)00395-5 ↗
10. K. SUGIYAMA and T. NAKAMURA, J. Mater. Sci. Lett. 6 (1987) 331.10.1007/BF01729344 ↗
11. F. LANGLAIS, P. DUPEL and R. PAILLER, in Proceedings of the 13th International Conference on CVD, edited by T. M. Besmann, M. D. ALLENDORF, McD. Robinson and R. K. Ulrich (Electrochemical Society, New Jersey, 1996) p. 555.
12. H. J. JEONG, H. D. PARK, J. D. LEE and J. O. PARK, Carbon 34 (1996) 417.10.1016/0008-6223(95)00208-1 ↗
13. Y. OHZAWA, M. TAKAHASHI and K. SUGIYAMA, J. Mater. Sci. 32 (1997) 4289.10.1023/A:1018659520333 ↗
14. K. SUGIYAMA and Y. OHZAWA, ibid. 24 (1989) 3756.10.1007/BF02385767 ↗
15. J. Y. OFORI and S. V. SOTIRCHOS, J. Mater. Res. 11 (1996) 2541.10.1557/JMR.1996.0320 ↗
16. J. KITAGAWA, Industrial Mater. 38 (1990) 49 (in Japanese).