journal article·2019-06Open access

Composition evolution and coalescence behavior of titanium oxide particles in Iron-Nickel binary alloy melt

Changji Xuan, Wangzhong Mu

Journal of Materials Science· Volume 54· Issue 11

Abstract

Particle coalescence refers to the dispersed particles in a suspension sticking to each other through the random collisions. This phenomenon is of vital importance for the process control and mechanical property of the metallic materials, such as Iron–Nickel binary alloy. The present work performed a fundamental study of the composition evolution and coalescence behavior of the Ti-oxide particles in the liquid Iron–Nickel binary alloy. The effect of the titanium addition amount on the composition of the inclusion particles is investigated through the Ti deoxidation experiments. The particle features are characterized by using a potentiostatic electrolytic extraction method. It shows that when the amount of the Ti addition arrives at a certain degree, the state of the oxide particles changes from the liquid to the solid. Meanwhile, the formation of the cluster can occur. The coalescence efficiency and attraction forces of the particles are calculated theoretically. It is found that the coalescence degree of the solid TiOx (x = 1.5–1.67) particle is close to that of the Al2O3 particle. The initial sintering behavior of the particles after coalescence–collision is analyzed by measuring the sintered neck radius. The apparent self-diffusion of the TiOx (x = 1.5–1.67) particle is approximately 1.7 times larger than that of the Al2O3 particle.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metallurgical Processes and Thermodynamics · Advanced materials and composites · Corrosion Behavior and Inhibition

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Hamzaoui R, Elkedim O, Fenineche N, Gaffet E, Craven J (2003) Structure and magnetic properties of nanocrystalline mechanically alloyed Fe–10% Ni and Fe–20% Ni. Mater Sci Eng A 360(1–2):299–30510.1016/S0921-5093(03)00460-X ↗
2. Hamzaoui R, Elkedim O, Gaffet E (2004) Milling conditions effect on structure and magnetic properties of mechanically alloyed Fe–10% Ni and Fe–20% Ni alloys. Mater Sci Eng A 381(1–2):363–37110.1016/j.msea.2004.05.008 ↗
3. Hamzaoui R, Elkedim O (2013) Magnetic properties of nanocrystalline Fe–10% Ni alloy obtained by planetary ball mills. J Alloys Compd 573:157–16210.1016/j.jallcom.2013.03.183 ↗
4. Li JF, Jie WQ, Yang GC, Zhou YH (2002) Solidification structure formation in undercooled Fe–Ni alloy. Acta Mater 50(7):1797–180710.1016/S1359-6454(02)00032-0 ↗
5. Zeng T (2017) On the martensitic structure and hardness in as-quenched Fe–Ni alloys. J. Alloys Compd. https://doi.org/10.1016/j.jallcom.2017.08.28510.1016/j.jallcom.2017.08.285 ↗
6. Nakada N (2017) Direct observation of martensitic reversion from lenticular martensite to austenite in Fe–Ni alloy. Mater Lett 187:166–16910.1016/j.matlet.2016.10.056 ↗
7. Sato H, Zaefferer S (2009) A study on the formation mechanisms of butterfly-type martensite in Fe–30% Ni alloy using EBSD-based orientation microscopy. Acta Mater 57(6):1931–193710.1016/j.actamat.2008.12.035 ↗
8. Karasev AV, Suito H (2008) Characteristics of fine oxide particles produced by Ti/M (M = Mg and Zr) complex deoxidation in Fe–10mass% Ni alloy. ISIJ Int 48(11):1507–151610.2355/isijinternational.48.1507 ↗
9. Pratsinis SE, Kim KS (1989) Particle coagulation, diffusion and thermophoresis in laminar tube flows. J Aerosol Sci 20(1):101–11110.1016/0021-8502(89)90034-7 ↗
10. Mu W, Dogan N, Coley KS (2018) In situ observation of deformation behavior of chain aggregate inclusions: a case study for Al2O3 at a liquid steel/argon interface. J Mater Sci 53:13203–13215. https://doi.org/10.1007/s10853-018-2557-010.1007/s10853-018-2557-0 ↗
11. Xuan CJ, Karasev AV, Jönsson PG (2016) Evaluation of agglomeration mechanisms of non-metallic inclusions and cluster characteristics produced by Ti/Al complex deoxidation in Fe–10mass% Ni alloy. ISIJ Int 56(7):1204–120910.2355/isijinternational.ISIJINT-2016-030 ↗
12. Malmberg KJ, Shibata H, Kitamura SY, Jönsson PG, Nabeshima S, Kishimoto Y (2010) Observed behavior of various oxide inclusions in front of a solidifying low-carbon steel shell. J Mater Sci 45(8):2157–2164. https://doi.org/10.1007/s10853-009-3982-x10.1007/s10853-009-3982-x ↗
13. Mu W, Jönsson PG, Nakajima K (2014) Effect of sulfur content on inclusion and microstructure characteristics in steels with Ti2O3 and TiO2 additions. ISIJ Int 54(12):2907–291610.2355/isijinternational.54.2907 ↗
14. Karasev A, Suito H (1999) Quantitative evaluation of inclusion in deoxidation of Fe–10 mass pct Ni alloy with Si, Ti, Al, Zr, and Ce. Metall Mater Trans B 30(2):249–25710.1007/s11663-999-0054-1 ↗
15. Sun MK, Jung IH, Lee HG (2008) Morphology and chemistry of oxide inclusions after Al and Ti complex deoxidation. Met Mater Int 14:791–79810.3365/met.mat.2008.12.791 ↗
16. Dashevskii VY, Aleksandrov AA, Kanevskii AG, Makarov MA (2010) Deoxidation equilibrium of titanium in the iron–nickel melts. ISIJ Int 50(1):44–5210.2355/isijinternational.50.44 ↗
17. Suzuki K, Sanbongi K (1975) Equilibrium study on deoxidation of steel with titanium. Trans Iron Steel Inst Jpn 15(12):618–62710.2355/isijinternational1966.15.618 ↗
18. Evans EL, Sloman HA (1953) Studies in the deoxidation of iron deoxidation by titanium. J Iron Steel Inst 174:318–324
19. Chino H, Nakamura Y, Tsunetomi E, Segawa K (1966) The deoxidation with titanium in liquid iron. Tetsu-to-Hagané 52(6):959–96610.2355/tetsutohagane1955.52.6_959 ↗
20. Kojima Y, Inouye M, Ohi J (1969) Titanoxyd im Gleich- gewicht mit Eisen–Titan–Legierungen bei 1600°C. Arch Eisenhüttenwes 40(9):667–67110.1002/srin.196904374 ↗
21. Fruehan RJ (1970) Activities in liquid Fe–Al–O and Fe–Ti–O alloys. Metall Trans 1(12):3403–341010.1007/BF03037871 ↗
22. Lombardi A, Mu W, Ravindran C, Dogan N, Barati M (2018) Influence of Al2Cu morphology on the incipient melting characteristics in B206 Al alloy. J Alloys Compd 747:131–13910.1016/j.jallcom.2018.02.329 ↗
23. Sakata K, Suito H (1999) Dispersion of fine primary inclusions of MgO and ZrO2 in Fe–10mass pct Ni alloy and the solidification structure. Metall Mater Trans B 30(6):1053–106310.1007/s11663-999-0111-9 ↗
24. Inoue R, Suito H (1991) Determination of oxygen in iron-aluminum alloy by inert gas fusion-infrared absorptiometry. Mater Trans JIM 32(12):1164–116910.2320/matertrans1989.32.1164 ↗
25. Macchesney JB, Muan A (1961) Phase equilibria at liquidus temperatures in the system iron oxide-titanium oxide at low oxygen pressures. Am Miner 46:572–582
26. Xuan CJ, Shibata H, Sukenaga S, Jösson PG, Nakajima K (2015) Wettability of Al2O3, MgO and Ti2O3 by liquid iron and steel. ISIJ Int 55(9):1882–189010.2355/isijinternational.ISIJINT-2014-820 ↗
27. Hadley RL, Derge G (1955) Equilibrium between titanium in liquid iron and titanium oxides. Trans Metall Soc AIME 203:55–60
28. Suzuki K, Omori Y, Sanbongi K (1967) Deoxidation of steel by titanium. Bull Res Inst Miner Dress Metall 23:137–146
29. Nakaoka T, Taniguchi S, Matsumoto K, Johansen ST (2001) Particle-size-grouping method of inclusion agglomeration and its application to water model experiments. ISIJ Int 41(10):1103–111110.2355/isijinternational.41.1103 ↗
30. Lei H, Nakajima K, He JC (2010) Mathematical model for nucleation, Ostwald ripening and growth of inclusion in molten steel. ISIJ Int 50(12):1735–174510.2355/isijinternational.50.1735 ↗
31. Nakanishi K, Szekely J (1975) Deoxidation kinetics in a turbulent flow field. Trans Iron Steel Inst Jpn 15(10):522–53010.2355/isijinternational1966.15.522 ↗
32. Fowkes FM (1964) Attractive forces at interfaces. Ind Eng Chem 56(12):40–5210.1021/ie50660a008 ↗
33. Visser J (1972) On Hamaker constants: a comparison between Hamaker constants and Lifshitz–van der Waals constants. Adv Colloid Interface Sci 3(4):331–36310.1016/0001-8686(72)85001-2 ↗
34. Xuan CJ, Karasev AV, Jönsson PG, Nakajima K (2016) Attraction force estimations of Al2O3 particle agglomerations in the melt. Steel Res Int 87(2):1600090. https://doi.org/10.1102/sirn.20160009010.1002/srin.201600090 ↗
35. Owens DK, Wendt RC (1969) Estimation of the surface free energy of polymers. J Appl Poly Sci 13(8):1741–174710.1002/app.1969.070130815 ↗
36. Kuscer D, Kovac J, Kosec M, Andriesen R (2008) The effect of the valence state of titanium ions on the hydrophilicity of ceramics in the titanium–oxygen system. J Eur Ceram Soc 28(3):577–58410.1016/j.jeurceramsoc.2007.07.014 ↗
37. Bergström L (1997) Hamaker constants of inorganic materials. Adv Colloid Interface Sci 70:125–16910.1016/S0001-8686(97)00003-1 ↗
38. Velarde MG and Zeytounian RK (Eds) (2002) Interfacial phenomena and the Marangoni effect, vol 428. Vienna/New York: Springer, p 256
39. Sasai K (2015) Direct measurement of agglomeration force exerted between alumina particles in molten steel. Tetsu-to-Hagané 101(5):275–28310.2355/tetsutohagane.101.275 ↗
40. Fisher RA (1926) On the capillary forces in an ideal soil. J Agric Sci 16(3):492–50510.1017/S0021859600007838 ↗
41. Humenik JRM, Kingery WD (1953) Metal-ceramic interactions: III, surface tension and wettability of metal-ceramic systems. J Am Ceram Soc 37(1):18–2310.1111/j.1151-2916.1954.tb13972.x ↗
42. Eustathopoulos N (1998) Dynamics of wetting in reactive metal/ceramic systems. Acta Mater 46(7):2319–2327
43. Naidich YV (1981) The wettability of solids by liquid metals. In: Cadenhead DA, Danielli JF (eds), Progress in surface and membrane science, vol 14 Academic Press, New York, pp 353–48410.1016/B978-0-12-571814-1.50011-7 ↗
44. Ogino K, Nogi K, Koshida Y (1973) Effect of oxygen on the wettability of solid oxide with molten iron. Tetsu-to-Hagané 59(10):1380–138710.2355/tetsutohagane1955.59.10_1380 ↗
45. Kapilashrami E, Jakobsson A, Seetharaman S, Lahiri AK (2003) Studies of the wetting characteristics of liquid iron on dense alumina by the X-ray sessile drop technique. Metal Mater Trans B 34(2):193–19910.1007/s11663-003-0006-0 ↗
46. Poirier DR, Yin HB, Suzuki M, Emi T (1998) Interfacial properties of dilute Fe–O–S melts on alumina substrates. ISIJ Int 38(3):229–23810.2355/isijinternational.38.229 ↗
47. Jimbo I, Cramb AW (1992) Computer aided interfacial measurements. ISIJ Int 32(1):26–3510.2355/isijinternational.32.26 ↗
48. Alle BC, Kingery WD (1959) Surface tension and contact angle. Trans Met Soc AIME 215(1):30–37
49. Takiuchi N, Taniguchi T, Tanaka Y, Shinozaki N, Mukai K (1991) Effects of oxygen and temperature on the surface tension of liquid iron and its wettability of alumina. J Jpn Inst Met 55:180–18510.2320/jinstmet1952.55.2_180 ↗
50. Takiuchi N, Taniguchi T, Shinozaki N, Mukai K (1991) Effects of oxygen on the surface-tension of liquid iron and the wettability of alumina by liquid-iron. J Jpn Inst Met 55:44–4910.2320/jinstmet1952.55.1_44 ↗
51. Nakashima K, Takihira K, Mori K, Shinozaki N (1992) Wettability of Al2O3 substrate by liquid iron-effects of oxygen in liquid iron and purity of Al2O3 substrate. Mater Trans JIM 33(10):918–92610.2320/matertrans1989.33.918 ↗
52. Mu W, Dogan N, Coley KS (2017) Agglomeration of non-metallic inclusions at steel/Ar interface: in-situ observation experiments and model validation. Metall Mater Trans B 48(5):2379–238810.1007/s11663-017-1027-4 ↗
53. Mu W, Dogan N, Coley KS (2017) Agglomeration of non-metallic inclusions at the steel/Ar interface: model application. Metall Mater Trans B 48(4):2092–210310.1007/s11663-017-0998-5 ↗
54. Kralchevsky PA, Paunov VN, Denkov ND, Ivanoc IBV, Nagayama KM (1993) Energetical and force approaches to the capillary interactions between particles attached to a liquid-fluid interface. J Colloid Interface Sci 155:420–43710.1006/jcis.1993.1056 ↗
55. Paunov VN, Kralchevsky PA, Denkov ND, Nagayama K (1993) Lateral capillary forces between floating submillimeter particles. J Colloid Interface Sci 157(1):100–11210.1006/jcis.1993.1163 ↗
56. Kobatake H, Brillo J (2013) Density and thermal expansion of Cr–Fe, Fe–Ni, and Cr–Ni binary liquid alloys. J Mater Sci 48(14):4934–4941. https://doi.org/10.1007/s10853-013-7274-010.1007/s10853-013-7274-0 ↗
57. Kingery WD, Berg M (1955) Study of initial stages of sintering solids by viscous flow, evaporation-condensation, and self-diffusion. J Appl Phys 26(10):1205–121210.1063/1.1721874 ↗
58. Kuczynski GG (1949) Self-diffusion in sintering of metallic particles. Trans AIME 185:169–178
59. Coble RL (1958) Initial sintering of alumina and hematite. J Am Ceram Soc 41(2):55–6210.1111/j.1151-2916.1958.tb13519.x ↗
60. Coble RL (1970) Diffusion models for hot pressing with surface energy and pressure effects as driving forces. J Appl Phys 41:4798–480710.1063/1.1658543 ↗