Optimal sidewall functionalization for the growth of ultrathin TiO2 nanotubes via atomic layer deposition
Source abstract
Abstract
One of the most suitable approaches for the production of inorganic nanotubes is by means of carbon nanotube (CNT) templates coated by atomic layer deposition (ALD). This approach is attractive because it has the potential of controlling the wall thickness down to the Angstroms level. However, it is a recognized fact that the chemistry of the substrate surface can delay the full coverage at the initial stages of the ALD coating process, mainly due to nucleation issues. This is an important issue that might restrict laying down homogeneous coatings within the ultrathin range, which is the foundation for producing self-supported inorganic nanotubes. Here, we explore the early stage of the TiO2 nucleation on CNT templates systematically functionalized with different chemical groups (COOH, OH) or N-doped. The effects of the functionalization on the nucleation process from tetrakis (dimethylamino) titanium and water were meticulously studied by means of transmission electron microscopy. Observations revealed grain-like growth of TiO2 over pristine, purified and –OH-functionalized CNTs. In contrast, COOH functionalization yielded good conformality, which was improved on N-doped CNTs. Results were confirmed by X-rays photoelectron spectroscopy analysis. We recommend either COOH or N-doped CNTs for the production of ultrathin TiO2 nanotubes.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Catalytic Processes in Materials Science · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. Hu H, Chang M, Wang X, Chen D (2017) Cotton fabric-based facile solar photocatalytic purification of simulated real dye wastes. J Mater Sci 52:9922–9930. doi: 10.1007/s10853-017-1107-510.1007/s10853-017-1107-5 ↗
2. Qu X, Xie D, Gao L et al (2015) Synthesis and characterization of TiO2/WO3 composite nanotubes for photocatalytic applications. J Mater Sci 50:21–27. doi: 10.1007/s10853-014-8441-710.1007/s10853-014-8441-7 ↗
3. Liu E, Fan J, Hu X et al (2015) A facile strategy to fabricate plasmonic Au/TiO2 nano-grass films with overlapping visible light-harvesting structures for H2 production from water. J Mater Sci 50:2298–2305. doi: 10.1007/s10853-014-8793-z10.1007/s10853-014-8793-z ↗
4. Nakata K, Fujishima A (2012) TiO2 photocatalysis: design and applications. J Photochem Photobiol C Photochem Rev 13:169–189. doi: 10.1016/j.jphotochemrev.2012.06.00110.1016/j.jphotochemrev.2012.06.001 ↗
5. Mohamed AM, Aljaber AS, Alqaradawi SY, Allam NK (2015) TiO2 nanotubes with ultrathin walls for enhanced water splitting. Chem Commun Chem Commun 51:12617–12620. doi: 10.1039/c5cc04539h10.1039/c5cc04539h ↗
6. Straumal BB, Protasova SG, Mazilkin AA et al (2016) Ferromagnetic behaviour of ZnO: the role of grain boundaries. Beilstein J Nanotechnol 7:1936–1947. doi: 10.3762/bjnano.7.18510.3762/bjnano.7.185 ↗
7. Straumal BB, Mazilkin AA, Protasova SG et al (2015) Grain boundaries as a source of ferromagnetism and increased solubility of Ni in nanograined ZnO. Rev Adv Mater Sci 41:61–71
8. Mohamed AM, Aljaber AS, AlQaradawi SY, Allam NK (2015) TiO2 nanotubes with ultrathin walls for enhanced water splitting. Chem Commun 51:12617–12620. doi: 10.1039/C5CC04539H10.1039/C5CC04539H ↗
9. Mitchell DRG, Attard DJ, Finnie KS et al (2005) TEM and ellipsometry studies of nanolaminate oxide films prepared using atomic layer deposition. Appl Surf Sci 243:265–277. doi: 10.1016/j.apsusc.2004.09.07010.1016/j.apsusc.2004.09.070 ↗
10. Smith SW, McAuliffe KG, Conley JF (2010) Atomic layer deposited high-k nanolaminate capacitors. Solid State Electron 54:1076–1082. doi: 10.1016/j.sse.2010.05.00710.1016/j.sse.2010.05.007 ↗
11. Leskelä M, Kemell M, Kukli K et al (2007) Exploitation of atomic layer deposition for nanostructured materials. Mater Sci Eng C 27:1504–1508. doi: 10.1016/j.msec.2006.06.00610.1016/j.msec.2006.06.006 ↗
12. Durán A, Tiznado H, Romo-Herrera JM et al (2014) Nanocomposite YCrO3/Al2O3: characterization of the core–shell, magnetic properties, and enhancement of dielectric properties. Inorg Chem 53:4872–488010.1021/ic4029589 ↗
13. Satishkumar BC, Govindaraj A, Nath M, Rao CNR (2000) Synthesis of metal oxide nanorods using carbon nanotubes as templates. J Mater Chem 10:2115–2119. doi: 10.1039/b002868l10.1039/b002868l ↗
14. Sun Z, Yuan H, Liu Z et al (2005) A highly efficient chemical sensor material for H2S: α-Fe2O3 nanotubes fabricated using carbon nanotube templates. Adv Mater 17:2993–2997. doi: 10.1002/adma.20050156210.1002/adma.200501562 ↗
15. Meng X, Banis MN, Geng D et al (2013) Controllable atomic layer deposition of one-dimensional nanotubular TiO2. Appl Surf Sci 266:132–140. doi: 10.1016/j.apsusc.2012.11.11610.1016/j.apsusc.2012.11.116 ↗
16. Ajayan PM, Stephan O, Redlich P, Colliex C (1995) Carbon nanotubes as removable templates for metal oxide nanocomposites and nanostructures. Nature 375:564–567. doi: 10.1038/375564a010.1038/375564a0 ↗
17. Li H, Zhou Q, Gao Y et al (2015) Templated synthesis of TiO2 nanotube macrostructures and their photocatalytic properties. Nano Res 8:900–906. doi: 10.1007/s12274-014-0571-310.1007/s12274-014-0571-3 ↗
18. Marichy C, Pinna N (2013) Carbon-nanostructures coated/decorated by atomic layer deposition: growth and applications. Coord Chem Rev 257:3232–3253. doi: 10.1016/j.ccr.2013.08.00710.1016/j.ccr.2013.08.007 ↗
19. Borbón-Nuñez HA, Dominguez D, Muñoz-Muñoz F et al (2017) Fabrication of hollow TiO2 nanotubes through atomic layer deposition and MWCNT templates. Powder Technol 308:249–257. doi: 10.1016/j.powtec.2016.12.00110.1016/j.powtec.2016.12.001 ↗
20. Aguilar-Elguézabal A, Antúnez W, Alonso G et al (2006) Study of carbon nanotubes synthesis by spray pyrolysis and model of growth. Diam Relat Mater 15:1329–1335. doi: 10.1016/j.diamond.2005.10.01110.1016/j.diamond.2005.10.011 ↗
21. Kamalakaran R, Terrones M, Seeger T et al (2000) Synthesis of thick and crystalline nanotube arrays by spray pyrolysis. Appl Phys Lett 77:3385–3387. doi: 10.1063/1.132761110.1063/1.1327611 ↗
22. Sumpter BG, Meunier V, Romo-Herrera JM et al (2007) Nitrogen-mediated carbon nanotube growth: diameter reduction, metallicity, bundle dispersability, and bamboo-like structure formation. ACS Nano 1:369–375. doi: 10.1021/nn700143q10.1021/nn700143q ↗
23. Tiznado H, Dominguez D, de la Cruz W et al (2012) TiO2 and Al2O3 ultra thin nanolaminates growth by ALD; instrument automation and films characterization. Rev Mex física 58:459–465
24. Trykowski G, Biniak S, Stobinski L, Lesiak B (2010) Preliminary investigations into the purification and functionalization of multiwall carbon nanotubes. Acta Phys Pol A 118:515–51810.12693/APhysPolA.118.515 ↗
25. Stobinski L, Lesiak B, Kövér L et al (2010) Multiwall carbon nanotubes purification and oxidation by nitric acid studied by the FTIR and electron spectroscopy methods. J Alloys Compd 501:77–84. doi: 10.1016/j.jallcom.2010.04.03210.1016/j.jallcom.2010.04.032 ↗
26. Hussain S, Jha P, Chouksey A et al (2011) Spectroscopic investigation of modified single wall carbon nanotube (SWCNT). J Mod Phys 2:538–543. doi: 10.4236/jmp.2011.2606310.4236/jmp.2011.26063 ↗
27. Bulusheva LG, Okotrub AV, Kurenya AG et al (2011) Electrochemical properties of nitrogen-doped carbon nanotube anode in Li-ion batteries. Carbon N Y 49:4013–4023. doi: 10.1016/j.carbon.2011.05.04310.1016/j.carbon.2011.05.043 ↗
28. Reyes-Reyes M, Grobert N, Kamalakaran R et al (2004) Efficient encapsulation of gaseous nitrogen inside carbon nanotubes with bamboo-like structure using aerosol thermolysis. Chem Phys Lett 396:167–173. doi: 10.1016/j.cplett.2004.07.12510.1016/j.cplett.2004.07.125 ↗
29. Farmer DB, Gordon RG (2006) Atomic layer deposition on suspended single-walled carbon nanotubes via gas-phase noncovalent functionalization. Nano Lett 6:699–703. doi: 10.1021/nl052453d10.1021/nl052453d ↗
30. Klein KL, Melechko AV, McKnight TE et al (2008) Surface characterization and functionalization of carbon nanofibers. J Appl Phys 103:61301. doi: 10.1063/1.284004910.1063/1.2840049 ↗
31. Satta A, Schuhmacher J, Whelan CM et al (2002) Growth mechanism and continuity of atomic layer deposited TiN films on thermal SiO2. J Appl Phys 92:7641–7646. doi: 10.1063/1.152248510.1063/1.1522485 ↗
32. Li Y-H, Hung T-H, Chen C-W (2009) A first-principles study of nitrogen- and boron-assisted platinum adsorption on carbon nanotubes. Carbon N Y 47:850–855. doi: 10.1016/j.carbon.2008.11.04810.1016/j.carbon.2008.11.048 ↗
33. Shao Y, Sui J, Yin G, Gao Y (2008) Nitrogen-doped carbon nanostructures and their composites as catalytic materials for proton exchange membrane fuel cell. Appl Catal B Environ 79:89–99. doi: 10.1016/j.apcatb.2007.09.04710.1016/j.apcatb.2007.09.047 ↗