Controlled chemical precipitation of titania for membrane applications—effect of heat treatment and fabrication conditions on its performance
Source abstract
Abstract
Controlled chemical precipitation method was used to obtain nanosized titania (TiO2) powders. XRD, DTA/TGA/DTG techniques were employed for phase analysis and to know the thermal changes taking place in precipitated precursor during heating. The effect of processing and fabrication conditions viz. calcination temperature, mold pressure and sintering temperature/time on membranes prepared from this titania powder was studied using permeability measurements. The bulk porosity, average pore size and permeability were found to decrease with increase in the molding pressure. However, an increase in the sintering period increases the bubble point and brings the diameter of the larger pores nearer to that of the average pore.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Battery Materials and Technologies · Zeolite Catalysis and Synthesis · Chemical Synthesis and Characterization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. R. R. Bhave “Inorganic Membranes, Synthesis and Applications” (Van Nostrand Reinhold, NY, 1991) p. 35.
2. L. Cot, C. Guizard and A. Larbot, Industrial Ceramics 8(3) (1988) 143.
3. M. A. Anderson, M. L. Gieselmam and Q. Xu, J. Memb. Sci 39 (1988) 243.10.1016/S0376-7388(00)80932-1 ↗
4. A. J. Burggraaf, K. Keizer and B. A. Vanhassel, Solid State Ionics 32/33 part 2 (1989) 771.10.1016/0167-2738(89)90357-3 ↗
5. C. H. Chang, R. Gopalan and Y. S. Lin, J. Memb. Sci. 91 (1994) 27.10.1016/0376-7388(94)00041-7 ↗
6. Q. Xu and M. A. Anderson, J. Amer. Ceram. Soc. 76 (1993) 2093.10.1111/j.1151-2916.1993.tb08338.x ↗
7. K. N. P. Kumar, J. Kumar and K. Keizer, ibid. 77 (1994) 1396.10.1111/j.1151-2916.1994.tb05426.x ↗
8. X. Z. Ding, Z. Z. Qi and Y. Z. He, J. Mater. Sci. Lett. 14 (1995) 21.10.1007/BF02565273 ↗
9. N. Serpone, D. L. Lawless and R. Khairutdinoy, J. Phys. Chem. 99 (1995) 16646.10.1021/j100045a026 ↗
10. E. W. Washburn, Proc. Natl. Acad. Sci. USA 7 (1921) 115.10.1073/pnas.7.4.115 ↗
11. K. B. Kesting “Synthetic Polymeric Membranes” (Wiley Interscience, NY, 1985).
12. H. K. Park, D. K. Kim and C. H. Kim, J. Amer. Ceram. Soc. 80(3) (1997) 743.10.1111/j.1151-2916.1997.tb02891.x ↗
13. H. S. Potdar, S. B. Deshpande, S. Mayadevi, P. A. Joy and S. K. Date, Indian J. Chem. 38A (1999) 468.
14. J. Rubio, J. L. Oteo, M. Villegas and P. Duran, J. Mater. Sci. 32 (1997) 643.10.1023/A:1018579500691 ↗
15. D. C. Hague and M. J. Mayo, J. Amer. Ceram. Soc. 77 (1994) 1957.10.1111/j.1151-2916.1994.tb07078.x ↗
16. M. Gopal, W. J. M. Chan and L. C. De Jonghe, J. Mater. Sci. 32 (1997) 6001.10.1023/A:1018671212890 ↗
17. A. Larbot, J. P. Fabre, C. Guizarad, L. Cot and J. Gillot, J. Amer. Ceram. Soc. 72 (1989) 257.10.1111/j.1151-2916.1989.tb06111.x ↗
18. A. Bokhimi, A. Morales, O. Novarao, J. Lopez, E. Sanchez and R. Gomez, J. Mater. Res. 10 (1995) 2788.10.1557/JMR.1995.2788 ↗
19. K. N. P. Kumar, V. T. Zaspalis, F. F. M. Demul, K. Keizer and A. J. Burggraaf, in “Better Ceramics Through Chemistry (V),” edited by M. J. Hampiensmith, W. G. Klempere and C. J. Brinker (MRS, Pittsburgh, 1992) p. 499.
20. C. N. R. Rao, “Solid State Chemistry” (Marcel Delkker Inc, NY, 1974) p. 455.
21. K. N. P. Kumar, K. Keizer, A. J. Burggraff and T. Okubo, Nature 358 (1992) 48.10.1038/358048a0 ↗