journal article·2007-06

Superplastic power-law creep of Sn–40%Pb–2.5%Sb peritectic alloy

R. Mahmudi, A. Rezaee-Bazzaz

Journal of Materials Science· Volume 42· Issue 11
Publisher page

Abstract

The power law-creep behavior of superplastic Sn–40Pb–2.5Sb alloys with different grain sizes has been investigated at room temperature. Stress exponent values for these alloys have been determined by indentation creep, conventional creep and uniaxial tension tests in order to evaluate the correspondence of indentation creep results with conventional tests. In all cases, the indentation results were in good agreement with each other and with those of the tensile and conventional creep tests. The average stress exponent values of about 2.6 and 3.0 corresponding to the strain rate sensitivity (SRS) indices of 0.33–0.39, depending on the grain size of the materials, indicate that the grain boundary sliding is the possible mechanism during creep deformation of Sn–Pb–Sb alloys. Within limits, the indentation tests are thus considered useful to acquire information on the creep behavior of small specimens of these soft tin–lead–antimony alloys at room temperature. It is also demonstrated that the indentation creep test provides a convenient method to measure SRS and thereby to assess the ability of a material to undergo superplastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. Thwaites CJ (1986) Brazing Solder 11:22
2. Hilger JP (1995) J Power Source 53:4510.1016/0378-7753(94)01977-4 ↗
3. Tomlinson WJ, Bryan NJ (1986) J Mater Sci 21:10310.1007/BF01144706 ↗
4. Fujiwara M, Otsuka M (2001) Mater Sci Eng A319–321:92910.1016/S0921-5093(01)01079-6 ↗
5. Juhasz A, Tasnadi P, Szaszvari P, Kovacs I (1986) J Mater Sci 21:328710.1007/BF00553371 ↗
6. Yang F, Li JCM (1995) Mater Sci Eng A201:4010.1016/0921-5093(95)09762-7 ↗
7. Manko HH (1992) Solders and Soldering, 3rd edn. McGraw-Hill, New York
8. Mathew MD, Yang H, Movva S, Murty KL (2005) Metall Mater Trans 36A:9910.1007/s11661-005-0142-z ↗
9. Roumina R, Raeisinia B, Mahmudi R (2003) J Mater Sci Lett 22:143510.1023/A:1025767631738 ↗
10. Kutty TRG, Ganguly C, Sastry DH (1996) Scripta Mater 34:183310.1016/1359-6462(95)00686-9 ↗
11. Roumina R, Raeisinia B, Mahmudi R (2004) Scripta Mater 51:49710.1016/j.scriptamat.2004.05.048 ↗
12. Cseh G, Chinh NQ, Juhasz A (1998) J Mater Sci Lett 17:120710.1023/A:1006593727372 ↗
13. Hooper RM, Brookes CA (1984) J Mater Sci 19:405710.1007/BF00980771 ↗
14. Viswanathan UK, Kutty TRG, Keswani R, Ganguly C (1996) J Mater Sci 31:270510.1007/BF00687304 ↗
15. Cseh G, Chinh QN, Tasnadi P, Juhasz A (1997) J Mater Sci 32:510710.1023/A:1018665300227 ↗
16. Giacometti E, Baluc N, Bonneville J, Rabier J (1999) Scripta Mater 41:98910.1016/S1359-6462(99)00242-0 ↗
17. Cseh G, Bar J, Gudladt HJ, Lendvai J, Juhasz A (1999) Mater Sci Eng A272:14510.1016/S0921-5093(99)00466-9 ↗
18. De La Torre A, Adeva P, Aballe M (1991) J Mater Sci 26:435110.1007/BF00543650 ↗
19. Sharma G, Ramanujan RV, Kutty TRG, Tiwari GP (2000) Mater Sci Eng A278:10610.1016/S0921-5093(99)00590-0 ↗
20. Yu HY, Imam MA, Rath RB (1986) Mater Sci Eng A79:12510.1016/0025-5416(86)90395-2 ↗
21. Kumar N, Raman KS, Sastry DH, Little EA (1990) J Mater Sci 25:75310.1007/BF00714105 ↗
22. Chinh NQ, Juhasz A, Tasnadi P, Kovacs I (1990) J Mater Sci 25:476710.1007/BF01129939 ↗
23. Hyde TH, Yehia KA, Becker AA (1995) Mater High Temp 13:13310.1080/09603409.1995.11689511 ↗
24. Dorner D, Roller K, Skrotzki B, Stockhert B, Eggler G (2003) Mater Sci Eng A357:34610.1016/S0921-5093(03)00205-3 ↗
25. Fang TT, Kola RR, Murty KL (1986) Metall Trans 17A:144710.1007/BF02650127 ↗
26. Rani SD, Murthy GS (2004) Mater Sci Technol 20:40310.1179/026708304225012161 ↗
27. Dutta I, Park C, Choi S (2004) Mater Sci Eng A379:40110.1016/j.msea.2004.03.023 ↗
28. Sargent PM, Ashby MF (1992) Mater Sci Technol 8:59410.1179/mst.1992.8.7.594 ↗
29. Lucas BN, Oliver WC (1999) Metall Mater Trans 30A:60110.1007/s11661-999-0051-7 ↗
30. Langdon TG (2000) Mater Sci Eng A283:26610.1016/S0921-5093(00)00624-9 ↗
31. Mulhearn TO, Tabor D (1960) J Inst Metals 89:7
32. Juhasz A, Tasnadi P, Kovacs I (1986) J Mater Sci Lett 5:3510.1007/BF01671427 ↗
33. Li WB, Henshal JL, Hooper RM, Easterling KE (1991) Acta Metall Mater 39:309910.1016/0956-7151(91)90043-Z ↗
34. Walser B, Sherby OD (1982) Scripta Metall 16:21310.1016/0036-9748(82)90389-1 ↗
35. Sherby OD, Wadsworth J (1989) Prog Mater Sci 33:16910.1016/0079-6425(89)90004-2 ↗
36. Frost HJ, Ashby MF (1982) Deformation mechanism maps. Pergamon, Oxford
37. Ashby MF, Verrall RA (1973) Acta Metall 21:14910.1016/0001-6160(73)90057-6 ↗
38. Mukherjee AK, Bird JE, Dorn JE (1969) ASM Trans 62:155
39. Gifkins RC (1976) Metall Trans 7A:225