journal article·2001-07

Non-equilibrium solidification by laser surface alloying of molybdenum with nickel: Structure and properties of alloyed layers

R. Pawlak, Z. Gawronski, A. Gasser, K. Wissenbach

Journal of Materials Science· Volume 36· Issue 13
Publisher page

Abstract

Surface alloying was carried out on molybdenum using continuous wave Nd : YAG and CO2 lasers. The alloying element (nickel) was deposited on the molybdenum surface by plasma spraying. Microstructure evolution and phase identification was investigated by means of optical and scanning microscopy and X-ray microanalysis. Layers with an average content of about 33% at. of nickel were obtained. Rapid solidification with fine scale microstructures and non-equilibrium nickel rich phases was reported. Molybdenum oxides with a suggested composition of the MoO2 were also identified. In addition the results of investigations of the alloyed layer microhardness and the layer resistance to erosion in an electric arc have been presented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Laser and Thermal Forming Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. W. Steen, “Laser Material Processing” (Springer Verlag, 1996).
2. J. Singh, in “Materials and Processes for Surface and Interface Engineering,” edited by Y. PauleauKluwer Academic Publishers, 1995) p. 347.10.1007/978-94-011-0077-9_10 ↗
3. A. Gasser, D. Hoffmann, F. Jansen, E. W. Kreutz, E. Lugscheider and K. Wissenbach, Surface and Coatings Technology 45 (1991) 409.10.1016/0257-8972(91)90250-Z ↗
4. K. Wang, J. Liu and D. Han, Surface Engineering 12 (1996)235.10.1179/sur.1996.12.3.235 ↗
5. S. Sasaki, ibid. 13 (1997) 238.10.1179/sur.1997.13.3.238 ↗
6. R. Pawlak and T. RaczyŃnski, Mater. Sci. Engng. A168 (1993) 67.10.1016/0921-5093(93)90272-G ↗
7. F. Kostrubiec, R. Pawlak and M. Walczak, in “Laser Technology V: Applications in Materials Sciences and Engineering,” edited by W. Wolinski and J. Kusinski, Proc. SPIE 3187 (Bellingham, 1997) p. 35.
8. Y. Q. Yan, J. Senkara and W. WŁosiŃski, Surface and Coatings Technology 48 (1991) 211.10.1016/0257-8972(91)90006-I ↗
9. J. Senkara, J. Mater. Sci. Lett. 10 (1991) 1078.10.1007/BF00720130 ↗
10. J. M. Pelletier, L. Renaud and F. Fouquet, Mater. Sci. Engng. A134 (1991) 1283.10.1016/0921-5093(91)90974-R ↗
11. M. Gremaud, M. Carrard and W. Kurz, Acta Metall. Mater. 38 (1990) 2587.10.1016/0956-7151(90)90271-H ↗
12. W. Kurz and R. Trivedi, Acta Metall. Mater. 38 (1990) 1.10.1016/0956-7151(90)90129-5 ↗
13. A. Kar and J. Mazumder, ibid. 40 (1992) 1873.10.1016/0956-7151(92)90174-D ↗
14. S. Mrowec, “Theory of Oxidation of Metals and Alloys” (WNT Warszawa, 1964) (in Polish).
15. E. Walczuk, in Proceedings of the 38th IEEE Holm Conference on Electrical Contacts (Philadelphia, 1992) p. 1.10.1109/HOLM.1992.246940 ↗
16. R. Michal and K. E. Saeger, IEEE Trans. Comp., Hybrids, Manuf. Technol. 12 (1989) 71.10.1109/33.19015 ↗