A study into first and second order thermal transitions of materials using Spectral-DSC
Source abstract
Abstract
Thermal and spectral analysis is conducted routinely to characterise a large range of materials and compounds. However, tests are often conducted independently on separate samples where comparison between essentially the same material can provide conflicting results. Simultaneous thermal and spectral measurements have the advantage of being able to directly compare results using the same sample. A novel design of a simultaneous thermal and spectral technique is described along with application examples that highlight the benefits of this technique. The thermal analysis was conducted using Differential Scanning Calorimetry (DSC) and the in situ spectral analysis was conducted using a Fourier Transform Near Infrared (FT-NIR) spectrometer. Two examples are used to illustrate the versatility and potential advantages of the combined thermal and spectral method. Analysis of the first and second order transitions of polyethylene terephthalate (PET) is presented along with the pharmaceutical polymorphic conversion of carbamazepine from Form III to Form I through an isothermal hold at 160 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Analytical Chemistry and Chromatography · Thermal and Kinetic Analysis · Crystallization and Solubility Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. Mirabella FM Jr (1986) Appl Spectrosc 40:417. doi: https://doi.org/10.1366/000370286450922210.1366/0003702864509222 ↗
2. Mirabella FM Jr (1990) Adv Chem Ser 227:35710.1021/ba-1990-0227.ch021 ↗
3. Koberstein JT, Gancarz I, Clarke TC (1986) J Polym Sci Part Polym Phys 24:2487. doi: https://doi.org/10.1002/polb.1986.09024110710.1002/polb.1986.090241107 ↗
4. Debakker CJ, St John NA, George GA (1992) Am Chem Soc Polym Chem Div 33:374
5. Sprunt JC, Jayasooriya UA (1997) Appl Spectrosc 51(9):1410. doi: https://doi.org/10.1366/000370297194213210.1366/0003702971942132 ↗
6. Torres N, Robin JJ, Boutevin B (2000) Eur Polym J 36:2075. doi: https://doi.org/10.1016/S0014-3057(99)00301-810.1016/S0014-3057(99)00301-8 ↗
7. Alves NM, Mano JF, Balaguer E, Meseguer Duenas JM, Gomez Ribelles JL (2002) Polymer (Guildf) 43:4111. doi: https://doi.org/10.1016/S0032-3861(02)00236-710.1016/S0032-3861(02)00236-7 ↗
8. Schawe JKE (2007) Thermochim Acta 461:145. doi: https://doi.org/10.1016/j.tca.2007.05.01710.1016/j.tca.2007.05.017 ↗
9. Atkinson JR, Biddlestone F, Hay JN (2000) Polymer (Guildf) 41:6965. doi: https://doi.org/10.1016/S0032-3861(00)00017-310.1016/S0032-3861(00)00017-3 ↗
10. Compton DAC, Johnson DJ, Powell JR (1993) Structure-property relations in polymers: spectroscopy and performance. American Chemical Society
11. Wiedemann HG (1993) J Therm Anal 40:1031. doi: https://doi.org/10.1007/BF0254686310.1007/BF02546863 ↗
12. Rustichelli C, Gamberini G, Ferioli V, Gamberini MC, Ficarra R, Tommasini S (2000) J Pharm Biomed Anal 23:41. doi: https://doi.org/10.1016/S0731-7085(00)00262-410.1016/S0731-7085(00)00262-4 ↗
13. Kobayashi Y, Ito S, Itai S, Yamamoto K (2000) Int J Pharm 193:137. doi: https://doi.org/10.1016/S0378-5173(99)00315-410.1016/S0378-5173(99)00315-4 ↗
14. Lang M, Kampf JW, Matzger AJ (2002) J Pharm Sci 91(4):1186. doi: https://doi.org/10.1002/jps.1009310.1002/jps.10093 ↗
15. Grzesiak AL, Lang M, Kim K, Matzger AJ (2003) J Pharm Sci 92(11):2260. doi: https://doi.org/10.1002/jps.1045510.1002/jps.10455 ↗
16. Papadopoulou CP, Kalfoglou NK (2000) Polymer (Guildf) 41:2543. doi: https://doi.org/10.1016/S0032-3861(99)00442-510.1016/S0032-3861(99)00442-5 ↗
17. Alves NM, Mano JF, Gomez Ribelles JL (2002) Polymer (Guildf) 43:3624
18. Silva Spinace MA, Lucato MU, Ferrao MF, Davanzo CU, De Paoli M-A (2006) Talanta 69:643. doi: https://doi.org/10.1016/j.talanta.2005.10.03510.1016/j.talanta.2005.10.035 ↗
19. Yoshii T, Yoshida H, Kawai T (2005) Thermochim Acta 431:177. doi: https://doi.org/10.1016/j.tca.2005.01.07010.1016/j.tca.2005.01.070 ↗
20. Dumitrescu OR, Baker DC, Foster G, Evans KE (2005) Polym Test 24:367. doi: https://doi.org/10.1016/j.polymertesting.2004.10.00310.1016/j.polymertesting.2004.10.003 ↗
21. Uchegbu LF, Schätzlein AG (2006) Polymers in drug delivery. CRC Press10.1201/9781420021677 ↗
22. O’Brien LE, Timmins P, Williams AC, York P (2004) J Pharm Biomed Anal 36:335. doi: https://doi.org/10.1016/j.jpba.2004.06.02410.1016/j.jpba.2004.06.024 ↗
23. Hilfiker R, Berghausen J, Blatter F, Burkhard A, De Paul SM, Freiermuth B et al (2003). J Therm Anal Calorim 73:429. doi: https://doi.org/10.1023/A:102540960894410.1023/A:1025409608944 ↗