journal article·2008-05

Evaluation of fatigue behavior on repaired carbon fiber/epoxy composites

Edson C. Botelho, Mirabel C. Rezende, Sérgio Mayer, Herman Voorwald

Journal of Materials Science· Volume 43· Issue 9
Publisher page

Abstract

The continuous use of structural polymer composites in aeronautical industry has required the development of repairing techniques of damages found in different types of laminates. The most usually adopted procedure to investigate the repair of composite laminates has been by repairing damages simulated in laminated composite specimens. This work shows the influence of structural repair technique on mechanical properties of a typical carbon fiber/epoxy laminate used in aerospace industry. When analyzed by tensile test, the laminates with and without repair present tensile strength values of 670 and 892 MPa, respectively, and tensile modulus of 53.0 and 67.2 GPa, respectively. By this result, it is possible to observe a decrease of the measured mechanical properties of the repaired composites. When submitted to fatigue test, it is observed that in loads higher than 250 MPa, this laminate presents a low life cycle (lower than 400,000 cycles). The fatigue performance of both laminates is comparable, but the non-repaired laminate presented higher tensile and fatigue resistance when compared with the repaired laminate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. Jang BZ (1994) Advanced polymer composites: principles and applications, 1st edn. ASM International, Materials Park, OH
2. Peters ST (1998) Handbook of composites, 2nd edn. Chapman & Hall10.1007/978-1-4615-6389-1 ↗
3. Mallick PK (1993) Fiber-reinforced composites, 2nd edn. Marcel Dekker
4. Gu W, Wu HF, Kampe SL, Lu GQ (1996) Mater Sci Eng A277:237
5. Mayer S (2003) Influência do Condicionamento Ambiental na Resistência à Tração de Laminados de Compósitos Poliméricos Reparados, PhD Thesis, ITA, Brazil10.1590/S0104-14282003000300004 ↗
6. Ahn SH, Springer GS (1998) J Compos Mater 32(11):565
7. Botelho EC, Nogueira CL, Rezende MC (2002) J Appl Polym Sci 86:311410.1002/app.11335 ↗
8. Botelho EC, Lauke B, Figiel L, Rezende MC (2003) Sci Technol 63:1843
9. Botelho EC, Pardini LC, Costa ML, Rezende MC (2005) J Mater Sci 40:3615. doi: https://doi.org/10.1007/s10853-005-0760-210.1007/s10853-005-0760-2 ↗
10. Cerny M, Glogar P, Manocha LM (2000) Carbon 38:213910.1016/S0008-6223(00)00071-3 ↗
11. Ashcroft IA et al (2001) Compos: Part A 32:4510.1016/S1359-835X(00)00131-7 ↗
12. Connor M, Bidaux JE, Manson JAE (1997) J Mater Sci 32:5059. doi: https://doi.org/10.1023/A:101865713117810.1023/A:1018657131178 ↗
13. Mahiou H, Béakou A (1998) Compos Part A 29A:103510.1016/S1359-835X(98)00090-6 ↗
14. Curtis PT, More BB (1983) Composites 14(3):101510.1016/0010-4361(83)90019-8 ↗
15. De Wilde WP, Frolkovic P (1994) Composites 25(2):11910.1016/0010-4361(94)90005-1 ↗
16. Saravanos DA, Chamis CC (1990) AIAA J 28(10):181310.2514/3.10478 ↗
17. Pandita SD, Verpoest I (2004) Compos Struct 64:19910.1016/j.compstruct.2003.08.003 ↗
18. Kawai M, Yajima S, Hachinohe A, Kawase Y (2001) Compos Sci Technol 61:128510.1016/S0266-3538(01)00027-6 ↗
19. Khan Z, Al-Sulaiman FS, Farooqi JK (1998) J Reinf Plast Compos 17(15):132010.1177/073168449801701501 ↗
20. Roudet F, Desplanques Y, Degallaix S (2002) Int J Fatigue 24:32710.1016/S0142-1123(01)00088-3 ↗
21. Gregory JR, Spearing SM (2005) Compos Part A 36:66510.1016/j.compositesa.2004.07.007 ↗
22. Botelho EC, Pardini LC, Rezende MC (2005) Mater Sci Eng A 399:19010.1016/j.msea.2005.02.093 ↗
23. ABARIS (1998) Training advanced composite structures: fabrication and damage repair. Abaris Training Resources Inc
24. Jang BZ (1994) Advanced polymer composites: principles and applications, 1st edn. ASM International, OH, USA
25. Pastore CM, Gowayed YA (1994) J Compos Technol Res 16(1):3210.1520/CTR10392J ↗
26. Botelho EC, Pardini LC, Rezende MC (2005) Mater Sci Eng A 399:19010.1016/j.msea.2005.02.093 ↗