Heat absorbability of single-walled, coiled and bamboo nanotube/epoxy nano-composites
Source abstract
Abstract
Carbon nanotubes and nanoparticles have become attractive as nano-fillers for improving the mechanical properties and thermal stability of polymer-based nanocomposites. Most research has focused on the use of straight single-walled (SWNTs) or multiwalled (MWNTs) carbon nanotubes as ultrastrong reinforcements for epoxy-based composites. However, due to the uncertainty of the bond interface between the nanotubes and matrix, the stress transferability of these composites is doubtful [1]. The latest development of coiled multiwalled carbon nanotubes (CCNTs) provides an improvement in the stress transferability due to the generation of mechanical interlocking in composite systems [2]. However, there is no comprehensive study which has addressed the thermal properties of these nanocomposites. In this letter, we report on the thermal properties of different epoxy-based nanocomposites formed by adding 0.5 wt% of SWNTs, CCNTs (Fig. 1a), and bamboo multiwalled (BCNTs) nanotubes (Fig. 1b) to pure epoxy. The low viscosity, commercially available ARALDITE GY 251 epoxy resin was used with CIBA HY 956 amine hardener. The sample preparation for 0.5 wt% nanotubes (SWNTs, CCNTs, and BCNTs) reinforced epoxy beam was based on four steps:
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Carbon Nanotubes in Composites · Natural Fiber Reinforced Composites · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (2)
Show source-provided references
1. K. T. LAU, Chem. Phys. Lett. 370 (2003) 399.10.1016/S0009-2614(03)00100-3 ↗
2. M. LU, H. L. LI and K. T. LAU, J. Phys. Chem. (2003) in revising.