journal article·2007-08

Enthalpy relaxation of reactive graphitic nanofibers reinforced epoxy

Amin Salehi-Khojin, Soumen Jana, Wei-Hong Katie Zhong

Journal of Materials Science· Volume 42· Issue 15
Publisher page

Abstract

The enthalpy relaxation of an epoxy resin modified by three different concentrations of reactive-Graphitic Nanofibers (r-GNFs) has been investigated by standard and modulated differential scanning calorimetry (DSC). From DSC scan at 10 °C/min following cooling at various rates through the transition region, the apparent activation energy, Δh*, was evaluated. The non-linearity parameter, χ, was analyzed by the peak shift method for samples annealed at temperature T g −20 °C for different period of time (up to 167 h). The non-exponentiality parameter, β, was determined based on the inflectional slope of the complex heat capacity. The experimental results showed that the incorporation of r-GNFs into epoxy network causes greater non-linearity, higher apparent activation energy, and broader relaxation time distribution than the neat epoxy resin. These values were optimum for epoxy resin with 0.3 wt% of r-GNFs.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Polymer Nanocomposites and Properties · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Liu Y, Zheng S, Nie K (2005) Polymer 46:1201610.1016/j.polymer.2005.09.056 ↗
2. Wingert MT (2004) Master thesis, Improvement of interfacial adhesion between UHMWPE fiber and Epoxy matrix using graphitic carbon nanofiber, North Dakota State University, Fargo, ND
3. Chiang MYM, Mckenna GB, Yuan J (1994) Polym Eng Sci 34:181510.1002/pen.760342406 ↗
4. Blair C, Zakrzewski J (1991) SAMPE Q 22(3):2
5. Hwang JJ, Liu HJ (2001) Macromolecules 34:868610.1021/ma011117q ↗
6. Liu HJ, Hwang JJ, Chen-Yang YW (2002) J Polym Sci Part A: Polym Chem 40:387310.1002/pola.10484 ↗
7. Dubief D, Samain E, Dufresne A (1999) Macromolecules 32:576510.1021/ma990274a ↗
8. Bessel CA, Laubernds K, Rodriguez NM, Baker RTK (2001) J Phys Chem 105:111510.1021/jp003280d ↗
9. Li J, Vergne MJ, Mowles ED, Zhong WH, Hercules DM, Lukehart CM (2005) Carbon 43:288310.1016/j.carbon.2005.06.003 ↗
10. Hutchinson JM, Ruddy M (1991) J Polym Sci Polym Phys 28:212710.1002/polb.1990.090281117 ↗
11. van der Linde R, Belder EG, Perera DY (2000) Progr Org Coatings 40:21510.1016/S0300-9440(00)00125-9 ↗
12. Tool AQ (1946) J Am Ceram Soc 29:24010.1111/j.1151-2916.1946.tb11592.x ↗
13. Narayanaswamy OS (1971) J Am Ceram Soc 54:49110.1111/j.1151-2916.1971.tb12186.x ↗
14. Moynihan CT, Easteal AJ, De Bolt MA, Tucker J (1976) J Am Ceram Soc 59:1210.1111/j.1151-2916.1976.tb09376.x ↗
15. Ramirez C, Abad MJ, Cano J, Lopez J (2001) Colloid Polym Sci 279:18410.1007/s003960000419 ↗
16. Williams G, Watts DC (1970) Trans Faraday Soc 66:8010.1039/tf9706600080 ↗
17. Woo EM, Kuo SM (1997) Polym Eng Sci 37:17310.1002/pen.11658 ↗
18. Lu H, Nutt S (2003) Macromol Chem Phys 204:183210.1002/macp.200350046 ↗
19. Zhong WH, Li J, Xu LR, Lukehart CM (2005) Polym Comp 26:12810.1002/pc.20085 ↗
20. Hutchinson JM, Kumar P (2002) Thermochim Acta 391:19710.1016/S0040-6031(02)00184-3 ↗
21. Zheng Y, Simon SL, Mckenna B (2002) J Polym Sci Part B: Polym Phys 40:202710.1002/polb.10270 ↗
22. Calventus Y, Montserrat S, Hutchinson JM (2001) Polymer 42:708110.1016/S0032-3861(01)00133-1 ↗
23. Hodge IM (1994) J Noncryst Solids 169:21110.1016/0022-3093(94)90321-2 ↗
24. Montserrat S, Hutchinson JM (2002) Polymer 23:35110.1016/S0032-3861(01)00617-6 ↗
25. Cortes P, Montserrat S, Hutchinson JM (1997) J Appl Polym Sci 63:1710.1002/(SICI)1097-4628(19970103)63:1<17::AID-APP4>3.0.CO;2-V ↗