journal article·2008-01

Some aspects of workability studies on sintered high strength P/M steel composite preforms of varying TiC contents during hot forging

R. Narayanasamy, V. Senthilkumar, K. S. Pandey

Journal of Materials Science· Volume 43· Issue 1
Publisher page

Abstract

Workability is a measure of the extent of deformation that powder metallurgy materials can withstand prior to fracture occurred in the forming or upsetting processes. Workability of a material is obtained from several parameters namely strain, strain rate and temperature. Hot upsetting of the composite steel preforms with varying TiC contents, namely, 3% and 4%, and aspect ratios, namely, 0.45, 0.71 and 1.25, was carried out at a temperature of 1120 °C and the formability behaviour of the same under triaxial stress state condition was determined. The curves plotted for different preforms were analysed and a relationship was established between the axial strain and the formability stress index (β). The influence of TiC addition, in the steel composite, on the formability stress index, the relative density (R) and various stress ratio parameters, namely, (σθ/σeff), (σm/σeff) and (σz/σeff) were studied. An attempt is also made to relate the fracture strain of the preforms with the formability stress index (β) under triaxial stress state condition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Powder Metallurgy Techniques and Materials · Advanced materials and composites · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Kuhn HA, Lee PW, Erturk T (1973) J Eng Mater-T ASME 95:213–21810.1115/1.3443155 ↗
2. Lee PW, Kuhn HA (1973) Met Trans 4:969–97410.1007/BF02645597 ↗
3. Kuhn HA, Downey CL (1971) Int J Powder Metall 7:15–25
4. Shima S, Oyane M (1976) Int J Mech Sci 18:285–29110.1016/0020-7403(76)90030-8 ↗
5. Doraivelu SM, Gegel HL, Gunasekaran JS, Malas JC, Morugan JT (1984) Int J Mech Sci 26(9/10):527–53510.1016/0020-7403(84)90006-7 ↗
6. Abdel-Rahman M, El-Sheikh MN (1995) J Mater Process Technol 54:97–10210.1016/0924-0136(95)01926-X ↗
7. Sowerby R, O’Reilly I, Chandrasekaran N, Dung NL (1984) J Eng Mater-T ASME 106:101–10610.1115/1.3225668 ↗
8. Rao KP, Hawbolt EB (1992) J Eng Mater-T ASME 114:116–12310.1115/1.2904131 ↗
9. Park JJ (1995) Int J Mech Sci 37:709–71910.1016/0020-7403(94)00101-O ↗
10. Narayanasamy R, Ponalagusamy R (2000) J Mater Process Technol 97:107–10910.1016/S0924-0136(99)00356-8 ↗
11. Tvergard V (1982) Int J Fract 18/4:237–25210.1007/BF00015686 ↗
12. Zhou ZY, Chen PQ, Shao WB, Xia W (2002) J Mater Process Technol 129:385–38810.1016/S0924-0136(02)00697-0 ↗
13. Gouveia BPPA, Rodrigues JMC, Martins PAF (2000) J Mater Process Tech 101:52–6310.1016/S0924-0136(99)00449-5 ↗
14. Narayansamy R, Ponalagusamy R, Subramanian KR (2001) J Mater Process Technol 110:182–18510.1016/S0924-0136(00)00884-0 ↗
15. Venugopal Rao A, Ramkrishnan N, Krishnakumar R (2003) J Mater Process Technol 142:2910.1016/S0924-0136(03)00432-1 ↗
16. Feng JP, Luo JZ (2000) . J Mater Process Technol 108:4010.1016/S0924-0136(00)00654-3 ↗
17. Narayanasamy R, Pandey KS (1997) J Mater Proc Technol 72:201–20710.1016/S0924-0136(97)00169-6 ↗
18. Narayanasamy R, Pandey KS (1997) J Mater Proc Technol 70:17–2110.1016/S0924-0136(97)00035-6 ↗
19. Narayansamy R, Pandey KS (2000) J Mater Process Technol 100:84–94
20. Vujovic AH, Shabalk J (1986) J Eng Mater Technol 108:24510.1115/1.3225876 ↗
21. Narayanasamy R, Ramesh T, Pandey KS (2006) Mater Design 27(7):566–57510.1016/j.matdes.2004.12.005 ↗
22. Narayan R (2001) Ceramic Coatings, IIT, Kanpur, India, Private Communication