Dielectric properties and microstructure of TiO2 modified (ZnMg)TiO3 microwave ceramics with CaO–B2O3–SiO2
Source abstract
Abstract
The low-fired (ZnMg)TiO3–TiO2 (ZMT–TiO2) microwave ceramics using low melting point CaO–B2O3–SiO2 as sintering aids have been developed. The influences of Mg substituted fraction on the crystal structure and microwave properties of (Zn1−x Mg x )TiO3 were investigated. The result reveals that the sufficient amount of Mg (x ≥ 0.3) could inhibit the decomposition of ZnTiO3 effectively, and form the single-phase (ZnMg)TiO3 at higher sintering temperatures. Due to the compensating effect of rutile TiO2 (τf = 450 ppm/°C), the temperature coefficient of resonant frequency (τf) for (Zn0.65Mg0.35)TiO3–0.15TiO2 with biphasic structure was adjusted to near zero value. Further, CaO–B2O3–SiO2 addition could reduce the sintering temperature from 1150 to 950 °C, and significantly improve the sinterability and microwave properties of ZMT–TiO2 ceramics, which is attributed to the formation of liquid phases during the sintering process observed by SEM. The (Zn0.65Mg0.35)TiO3–0.15TiO2 dielectrics with 1 wt% CaO–B2O3–SiO2 sintered at 950 °C exhibited the optimal microwave properties: e ≈ 25, Q × f ≈ 47,000 GHz, and τf ≈ ± 10 ppm/°C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Sebastian MT (2008) Dielectric materials for wireless communication. Elsevier
2. Sebastian MT, Jantunen H (2008) Int Mater Rev 53(2):5710.1179/174328008X277524 ↗
3. Golovchanshi A, Kim HT, Kim YH (1998) J Korean Phys Soc 32(2):S1167
4. Kim HT, Kim SH, Nahm S, Byun JD (1999) J Am Ceram Soc 82(11):304310.1111/j.1151-2916.1999.tb02200.x ↗
5. Yamaguchi O, Morimi M, Kawabata H, Shimizu K (1987) J Am Ceram Soc 70(5):C97
6. Kim HT, Nahm S, Byun JD, Kim Y (1999) J Am Ceram Soc 82(12):347610.1111/j.1151-2916.1999.tb02268.x ↗
7. Hsieh M-L, Chen L-S, Wang S-M, Sun C-H, Weng M-H, Houng M-P, Fu S-L (2005) Jpn J Appl Phys 44(7A):504510.1143/JJAP.44.5045 ↗
8. Wang Y-R, Wang S-F, Lin Y-M (2005) Ceram Int 31:90510.1016/j.ceramint.2004.09.017 ↗
9. Chaouchi A, d’ Astorg S, Marinel S, Aliouat M (2007) Mater Chem Phys 103:106–11110.1016/j.matchemphys.2007.01.017 ↗
10. Lee Y-C, Lee W-H (2005) Jpn J Appl Phys 44(4A):183810.1143/JJAP.44.1838 ↗
11. Liu X, Gao F, Zhao L, Tian C (2007) J Alloys Compd 436:28510.1016/j.jallcom.2006.07.027 ↗
12. Chaouchi A, Aliouat M, Marinel S, d’ Astorg S, Bourahla H (2007) Ceram Int 33:24510.1016/j.ceramint.2005.09.011 ↗
13. Lee Y-C, Lee W-H, Shiao F-T (2004) Jpn J Appl Phys 43(11A):759610.1143/JJAP.43.7596 ↗
14. Zhang QL, Yang H, Zou JL, Wang HP (2005) Mater Lett 59:88010.1016/j.matlet.2004.11.036 ↗
15. Chai Y-L, Chang Y-S, Hsiao Y-J, Lian Y-C (2008) Mater Res Bull 43:25710.1016/j.materresbull.2007.03.016 ↗
16. Templeton A, Wang X, Penn SJ, Webb SJ, Cohen LF, Alford NM (2000) J Am Ceram Soc 83(1):9510.1111/j.1151-2916.2000.tb01154.x ↗
17. Zhou X, Li B, Zhang S, Ning H (2009) J Mater Sci: Mater Electron 20:262
18. Wakino K (1989) Ferroelectric 91:6910.1080/00150198908015730 ↗
19. Shin H, Shin H-K, Jung HS, Cho S-Y, Hong KS (2005) Mater Res Bull 40(11):202110.1016/j.materresbull.2005.04.025 ↗