Synthesis and properties of barium titanate stannate thin films by chemical solution deposition
Source abstract
Abstract
Barium titanate stannate (BaTi1−xSnxO3, 0 ≤ x ≤ 0.25) thin films were deposited directly on copper foil substrates via a chelate chemical solution process. The films were subsequently crystallized in a reducing atmosphere such that substrate oxidation was avoided and that the 2-valent state of tin could be stabilized. Despite the stabilization of the low-melting temperature SnO oxidation state at high temperatures, the final grain size was smaller with increased tin incorporation similar to other B-site substituted BaTiO3 films. Temperature and field-dependent dielectric measurements revealed a reduction in dielectric constant and dielectric tuning with increasing tin concentration. The reduction in permittivity with reduced grain size is consistent with the well-known trends for ceramic barium titanate and in combination with a defect-dipole model involving Sn acceptors, can be used to explain the experimental trends. Phase transition frequency dependence was studied and for compositions containing up to 25 mole percent tin. No phase transition dispersion was observed and thus no strong evidence of relaxor-like character. The phase transition became increasingly diffuse with deviation from Curie–Weiss behavior, but the observed transition temperatures agreed well with bulk reference data.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Electronic and Structural Properties of Oxides · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Tombak A, Maria JP, Ayguavives F, Jin Z, Stauf GT, Kingon AI, Mortazawi A (2002) IEEE Microw Wirel Co 12:3. doi:https://doi.org/10.1109/7260.97571610.1109/7260.975716 ↗
2. Pervez NK, Hansen PJ, York RA (2004) Appl Phys Lett 85:4451. doi:https://doi.org/10.1063/1.181872410.1063/1.1818724 ↗
3. Ghosh D, Laughlin B, Nath J, Kingon AI, Steer MB, Maria JP (2006) Thin Solid Films 496:669. doi:https://doi.org/10.1016/j.tsf.2005.09.02510.1016/j.tsf.2005.09.025 ↗
4. Kingon AI, Maria JP, Streiffer SK (2000) Nature 406:1032. doi:https://doi.org/10.1038/3502324310.1038/35023243 ↗
5. Hofer C, Hoffmann M, Boettger U, Waser R (2002) Ferroelectrics 270:179. doi:https://doi.org/10.1080/0015019021124210.1080/00150190211242 ↗
6. Ihlefeld J, Laughlin B, Hunt-Lowery A, Borland W, Kingon A, Maria J-P (2005) J Electroceram 14:95. doi:https://doi.org/10.1007/s10832-005-0866-610.1007/s10832-005-0866-6 ↗
7. Jonker GH (1955) Philips Tech Rev 17:129
8. Novosiltsev NS, Khodakov AL (1956) Sov Phys Tech Phys 1:306
9. Smolenskii GA, Isupov VA (1954) Zh Tekh Fiz 24:1375
10. Mueller V, Beige H, Abicht HP (2004) Appl Phys Lett 84:1341. doi:https://doi.org/10.1063/1.164982010.1063/1.1649820 ↗
11. Yasuda N, Ohwa H, Asano S (1996) Jpn J Appl Phys, Part 1 35:5099. doi:https://doi.org/10.1143/JJAP.35.509910.1143/JJAP.35.5099 ↗
12. Smolensky GA (1970) J Phys Soc Jpn 28(Suppl):26
13. Mueller V, Beige H, Abicht HP, Eisenschmidt C (2004) J Mater Res 19:2834. doi:https://doi.org/10.1557/JMR.2004.038610.1557/JMR.2004.0386 ↗
14. Kuo YF, Tseng TY (1999) Electrochem Solid-State Lett 2:236. doi:https://doi.org/10.1149/1.139079510.1149/1.1390795 ↗
15. Yoon KH, Park JH, Jang JH (1999) J Mater Res 14:2933. doi:https://doi.org/10.1557/JMR.1999.039210.1557/JMR.1999.0392 ↗
16. Zhai JW, Shen B, Yao X, Zhang LY (2004) J Am Ceram Soc 87:2223. doi:https://doi.org/10.1111/j.1151-2916.2004.tb07495.x10.1111/j.1151-2916.2004.tb07495.x ↗
17. Zhai J, Shen B, Yao X, Zhang L (2004) Mater Res Bull 39:1599. doi:https://doi.org/10.1016/j.materresbull.2004.05.01010.1016/j.materresbull.2004.05.010 ↗
18. Halder S, Victor P, Laha A, Bhattacharya S, Krupanidhi SB, Agarwal G, Singh AK (2002) Solid State Commun 121:329. doi:https://doi.org/10.1016/S0038-1098(02)00017-010.1016/S0038-1098(02)00017-0 ↗
19. Nakagauchi R, Kozuka H (2007) J Sol-Gel Sci Technol 42:221. doi:https://doi.org/10.1007/s10971-007-0772-210.1007/s10971-007-0772-2 ↗
20. Song S, Zhai JW, Yao X (2007) J Sol-Gel Sci Technol 44:75. doi:https://doi.org/10.1007/s10971-007-1604-010.1007/s10971-007-1604-0 ↗
21. Ihlefeld JF, Vodnick AM, Baker SP, Borland WJ, Maria J-P (2008) J Appl Phys 103(7):07411210.1063/1.2903211 ↗
22. Dawley JT, Clem PG (2002) Appl Phys Lett 81:3028. doi:https://doi.org/10.1063/1.151663010.1063/1.1516630 ↗
23. Dawley JT, Ong RJ, Clem PG (2002) J Mater Res 17:1678. doi:https://doi.org/10.1557/JMR.2002.024710.1557/JMR.2002.0247 ↗
24. Ihlefeld JF, Borland W, Maria J-P (2005) J Mater Res 20:2838. doi:https://doi.org/10.1557/JMR.2005.034210.1557/JMR.2005.0342 ↗
25. Ihlefeld JF, Borland WJ, Maria J-P (2008) Thin Solid Films 516:3126. doi:https://doi.org/10.1016/j.tsf.2007.08.09610.1016/j.tsf.2007.08.096 ↗
26. Ihlefeld JF, Borland WJ, Maria J-P (2008) Scr Mater 58:549. doi:https://doi.org/10.1016/j.scriptamat.2007.11.00810.1016/j.scriptamat.2007.11.008 ↗
27. Ihlefeld JF, Borland WJ, Maria J-P (2007) Adv Funct Mater 17:1199. doi:https://doi.org/10.1002/adfm.20060115910.1002/adfm.200601159 ↗
28. Hoffmann S, Waser R (1999) J Eur Ceram Soc 19:1339. doi:https://doi.org/10.1016/S0955-2219(98)00430-010.1016/S0955-2219(98)00430-0 ↗
29. Schwartz RW, Clem PG, Voigt JA, Byhoff ER, Van Stry M, Headley TJ, Missert NA (1999) J Am Ceram Soc 82:235910.1111/j.1151-2916.1999.tb02091.x ↗
30. Barin I (1995) In: Thermochemical data of pure substances VCH. Weinheim, New York10.1002/9783527619825 ↗
31. Yang GY, Dickey EC, Randall CA, Barber DE, Pinceloup P, Henderson MA, Hill RA, Beeson JJ, Skamser DJ (2004) J Appl Phys 96:7492. doi:https://doi.org/10.1063/1.180926710.1063/1.1809267 ↗
32. Ihlefeld JF, Losego MD, Collazo R, Borland WJ, Maria JP (2008) J Mater Sci 43:38. doi:https://doi.org/10.1007/s10853-007-2135-310.1007/s10853-007-2135-3 ↗
33. Nelson JB, Riley DP (1945) Proc Phys Soc Lond 57:160. doi:https://doi.org/10.1088/0959-5309/57/3/30210.1088/0959-5309/57/3/302 ↗
34. ASTM E 112-96 (2003) In: Standard test methods for determining average grain size. ASTM International, West Conshohocken, PA
35. Kröger FA, Vink HJ (1956) Solid State Phys 3:30710.1016/S0081-1947(08)60135-6 ↗
36. Jaffe B, Cook WR, Jaffe HLC (1971) In: Piezoelectric ceramics. Academic Press, London, New York