journal article·2012-01

Quantitative metallographic assessment of the electromagnetic casting influence on the microstructure of 7075 Al alloy

Aleksandra Patarić, Marija Mihailović, Zvonko Gulišija

Journal of Materials Science· Volume 47· Issue 2
Publisher page

Abstract

This study presents an attempt to obtain the better quality of an aluminum super-high strength alloy by application of electromagnetic field during the casting process. The conventional continuous casting process of aluminum alloys causes many defects, such as surface imperfections, grain boundary segregation, non-uniform grain size, and porosity. The better ingot surface along with the homogeneous fine-grained microstructure, and hence the better mechanical properties of the ingot, can be achieved by applying the electromagnetic casting process. The microstructure characterization, accompanied by quantitative metallographic assessment, reveals that it is possible to avoid or decrease many defects of as cast ingots during electromagnetic casting process. In this article, the microstructure of the samples of as cast 7075 aluminum alloy, obtained with and without electromagnetic field influence, was analyzed by optical microscope and the variation of key alloying elements content, i.e., Zn and Mg, through the ingot cross section was examined by chemical analysis. Besides, the microstructural parameters such as dendrite arm spacing, interdendritic space width, as well as eutecticum and intermetallic phases volume fraction, were measured using linear method. The electromagnetic field influence on the microstructure of the as cast 7075 Al alloy was evaluated based on measured quantitative metallographic data.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming · Induction Heating and Inverter Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Zhihao Z, Jianzhong C, Jie D (2007) J Mater Process Technol 182:18510.1016/j.jmatprotec.2006.07.029 ↗
2. Zhihao Z, Jianzhong C, Jie D, Zhefeng W (2005) J Alloy Compd 396:16410.1016/j.jallcom.2004.12.020 ↗
3. Beijiang Z, Guimin L, Jianzhong C (2002) J Mater Sci Technol 18:40110.1179/026708302225001624 ↗
4. Zhang B, Cui J, Lu G, Zhang Q, Ban C (2003) Trans Nonferrous Met Soc China 13:158
5. Zhu Q, Zhao Y, Cui J, Zuo B, Qu F (2008) Acta Metall Sin 21:20510.1016/S1006-7191(08)60040-X ↗
6. Jie D, Jianzhong C, Fuxiao Y, Chunyan B, Zhihao Z (2004) Metall Mater Trans 35:248710.1007/s11661-006-0228-2 ↗
7. Yubo Z, Jianzhong C, Jie D, Fuxiao Y (2005) J Alloy Compd 402:14910.1016/j.jallcom.2005.04.135 ↗
8. Jie D, Cui J, Yu F, Zhao Z, Zhuo Y (2006) J Mater Process Technol 171:39910.1016/j.jmatprotec.2005.07.010 ↗
9. Cui J, Zhang Z, Le Q (2010) Trans Nonferrous Met Soc China 20:204610.1016/S1003-6326(09)60415-5 ↗
10. Hao H, Zhang X, Park J, Kim H, Jin J (2003) J Mater Process Technol 142:52610.1016/S0924-0136(03)00653-8 ↗
11. Cao Z, Jia F, Zhang X, Hao H, Jin J (2003) Mater Sci Eng A327:133
12. Zuo Y, Cui J, Zhao Z, Zhang H, Qin K (2005) Mater Sci Eng A 406:28610.1016/j.msea.2005.07.001 ↗
13. Sug W, Hai H (2003) Mettal Mater Trans 34:153710.1007/s11661-003-0265-z ↗
14. Cui J, Zhang Z, Le Q (2010) Trans Nonferrous Met Soc China 20:s29710.1016/S1003-6326(10)60487-6 ↗
15. Patarić A, Gulišija Z, Marković S (2007) Prakt Metallogr 44:29010.3139/147.100346 ↗
16. Mapelli C, Gruttadauria A, Peroni M (2010) J Mater Process Technol 210:30610.1016/j.jmatprotec.2009.09.016 ↗