Quasi-static and dynamic mechanical properties of commercial-purity tungsten processed by ECAE at low temperatures
Source abstract
Abstract
In this work, we have processed commercial purity tungsten (W) via different routes of equal-channel angular extrusion (ECAE) at temperatures as low as 600 °C. We have systematically evaluated the quasi-static and dynamic compressive behaviors of the processed W. Quasi-static compression tests were performed using an MTS hydro-servo system at room temperature. It is observed that samples ECAE processed at 800 °C show higher yield and flow stresses than those processed at other temperatures; no obvious strain hardening is observed in the quasi-static stress–strain curves. Quasi-static strain rate jump tests show that the strain rate sensitivity of ECAE W is in the range of 0.02 to 0.03, smaller than that of coarse-grained W. Uni-axial dynamic compressive tests were performed using the Kolsky bar (or split-Hopkinson pressure bar, SHPB) system. Post-loading SEM observations revealed that under dynamic compression, the competition between cracking at pre-existing extrinsic surface defects, grain boundaries, and uniform plastic deformation of the individual grains control the overall plastic deformation of the ECAE W. The existence of flow softening under dynamic loading has been established for all of the ECAE W specimens.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Advanced materials and composites · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Krasko GL (1993–1994) Int J Refract Met Hard Mater 12:25110.1016/0263-4368(93)90033-C ↗
2. Dummer T, Lasalvia JC, Ravichandran G, Meyers MA (1998) Acta Mater 46:6267. doi:https://doi.org/10.1016/S1359-6454(98)00255-910.1016/S1359-6454(98)00255-9 ↗
3. Lennon AM, Ramesh KT (2000) Mater Sci Eng A 276:9. doi:https://doi.org/10.1016/S0921-5093(99)00517-110.1016/S0921-5093(99)00517-1 ↗
4. Wei Q, Jiao T, Ramesh KT, Ma E, Kecskes LJ, Magness L et al (2006) Acta Mater 54:77. doi:https://doi.org/10.1016/j.actamat.2005.08.03110.1016/j.actamat.2005.08.031 ↗
5. Kecskes LJ, Cho KC, Dowding RJ, Schuster BE, Valiev RZ, Wei Q (2007) Mater Sci Eng A 467:33. doi:https://doi.org/10.1016/j.msea.2007.02.09910.1016/j.msea.2007.02.099 ↗
6. Lu K (2008) Int Mater Rev 53:21. doi:https://doi.org/10.1179/174328008X25435810.1179/174328008X254358 ↗
7. Valiev RZ, Estrin Y, Horita Z, Langdon TG, Zehetbauer M, Zhu YT (2006) JOM-US 58:3310.1007/s11837-006-0213-7 ↗
8. Wei Q, Ramesh KT, Kecskes LJ, Mathaudhu SN, Hartwig KT (2008) Mater Sci Forum 579:7510.4028/www.scientific.net/MSF.579.75 ↗
9. Bechtold JH (1956) J Met Trans AIME 206:142
10. Farrell K, Schaffhauser AC, Stiegler JO (1967) J Less Common Met 13:141. doi:https://doi.org/10.1016/0022-5088(67)90177-410.1016/0022-5088(67)90177-4 ↗
11. Wei Q, Zhang H, Schuster BE, Ramesh KT, Valiev RZ, Kecskes LJ et al (2006) Acta Mater 54:4079. doi:https://doi.org/10.1016/j.actamat.2006.05.00510.1016/j.actamat.2006.05.005 ↗
12. Wei Q, Ramesh KT, Ma E, Kesckes LJ, Dowding RJ, Kazykhanov VU et al (2005) Appl Phys Lett 86:101907. doi:https://doi.org/10.1063/1.187575410.1063/1.1875754 ↗
13. Barber RE, Dudo T, Yasskin PB, Hartwig KT (2004) Scripta Mater 51:373. doi:https://doi.org/10.1016/j.scriptamat.2004.05.02210.1016/j.scriptamat.2004.05.022 ↗
14. Follansbee PS (1985) In ASM metals handbook. American Society of Metals. p 190
15. Hall EO (1951) P Phys Soc B 64:74710.1088/0370-1301/64/9/303 ↗
16. Petch NJ (1953) J Iron Steel I 174:25
17. Wei Q (2007) J Mater Sci 42:1709. doi:https://doi.org/10.1007/s10853-006-0700-910.1007/s10853-006-0700-9 ↗
18. Wei Q, Cheng S, Ramesh KT, Ma E (2004) Mater Sci Eng A 381:71. doi:https://doi.org/10.1016/j.msea.2004.03.06410.1016/j.msea.2004.03.064 ↗
19. Wei Q, Kecskes LJ (2008) Mater Sci Eng A. doi:https://doi.org/10.1016/j.msea.2008.01.01310.1016/j.msea.2008.01.013 ↗