journal article·2013-04

Investigation of fiber/matrix adhesion: test speed and specimen shape effects in the cylinder test

B. Morlin, L. M. Vas, T. Czigany

Journal of Materials Science· Volume 48· Issue 8
Publisher page

Abstract

The cylinder test, developed from the microdroplet test, was adapted to assess the interfacial adhesion strength between fiber and matrix. The sensitivity of cylinder test to pull-out speed and specimen geometry was measured. It was established that the effect of test speed can be described as a superposition of two opposite, simultaneous effects which have been modeled mathematically by fitting two parameter Weibull curves on the measured data. Effects of the cylinder size and its geometrical relation on the measured strength values have been analyzed by finite element method. It was concluded that the geometry has a direct influence on the stress formation. Based on the results achieved, recommendations were given on how to perform the novel single fiber cylinder test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fiber-reinforced polymer composites · Mechanical Behavior of Composites · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (21)

Show source-provided references
1. Zhandarov S, Mäder E (2005) Compos Sci Technol. doi: 10.1016/j.compscitech.2004.07.003
2. Bailey C, Davies P, Grohens Y, Dolto G (2004) Appl Compos Mater. doi: 10.1023/B:ACMA.0000012902.93986.bf
3. Yu T, Wu CM, Chang CY, Wang CY, Rwei SP (2012) Express Polym Lett. doi: 10.3144/expresspolymlett.2012.35
4. Yao M, Deng H, Mai F, Wang K, Zhang Q, Chen F, Fu Q (2011) Express Polym Lett. doi: 10.3144/expresspolymlett.2011.92
5. Balogh G, Czigany T (2011) Plast Rubb Compos. doi: 10.1179/1743289811X12988633927871
6. Nairn JA (2004) In: Moore DR (ed) The application of fracture mechanics to polymers, adhesives, and composites. Elsevier, Amsterdam
7. Pisanova E, Zhandarov S, Mäder E (2001) Compos Part A-Appl S. doi: 10.1016/S1359-835X(00)00055-5
8. Nardin M, Schultz J (1993) Compos Interface. doi: 10.1163/156855493X00068
9. Kessler H, Schüller T, Beckert W, Lauke B (1999) Compos Sci Technol. doi: 10.1016/S0266-3538(99)00078-0
10. Liu CH, Nairn JA (1999) Int J Adhes Adhes. doi: 10.1016/S0143-7496(98)00057-8
11. Schüller T, Bahr U, Beckert W, Lauke B (1998) Compos Part A-Appl S. doi: 10.1016/S1359-835X(98)00044-X
12. Morlin B, Czigany T (2012) Polym Testing. doi: 10.1016/j.polymertesting.2011.10.007
13. Zinck P, Wagner HD, Salamon L, Gerard JF (2001) Polymer. doi: 10.1016/S0032-3861(00)00871-5
14. Straub A, Slivka M, Schwartz P (1997) Compos Sci Technol. doi: 10.1016/S0266-3538(96)00146-7
15. Day RJ, Rodrigez JVC (1998) Compos Sci Technol. doi: 10.1016/S0266-3538(97)00197-8
16. Grishchuk S, Karger-Kocsis J (2011) Express Polym Lett. doi: 10.3144/expresspolymlett.2011.2
17. Pandey G, Kareliya CH, Singh RP (2012) J Compos Mater. doi: 10.1177/0021998311410508
18. Anuar H, Zuraida A, Morlin B, Kovács JG (2011) J Nat Fibers 10(1080/15440478):550765
19. Persson BNJ, Volokitin AI (2006) Eur Phys J E. doi: 10.1140/epje/i2006-10045-9
20. Vas LM, Rácz Z (2004) J Compos Mater. doi: 10.1177/0021998304044767
21. Mendels DA, Leterrier Y, Manson JAE (2002) J Compos Mater. doi: 10.1177/0021998302036003508