journal article·2012-05Open access

Osteoblast cell response to nanoscale SiO2/ZrO2 particulate-reinforced titanium composites and scaffolds by powder metallurgy

Yuncang Li, Chao Han, Xinkun Zhu, Cuie Wen, Peter Hodgson

Journal of Materials Science· Volume 47· Issue 10

Abstract

The strength of porous pure titanium (Ti) scaffold decreases dramatically with the introduction of porosity and might become lower than that of natural bone when with high porosity. To simultaneously meet the requirements of low-elastic modulus and appropriate strength for implant materials, it is necessary to develop new biocompatible Ti-based composites that are stronger than those currently available while providing low-elastic modulus and adequate strength when they are scaffolded into a porous structure. In this study, new particulate-reinforced Ti-based composites with nanoscale oxide particles of SiO2 and ZrO2 were prepared using a powder metallurgical method. The strengths of the new particulate-reinforced titanium composites were found to be significantly higher than that of a pure Ti. Cell culture results revealed that the articulate-reinforced titanium composites showed excellent biocompatibility and cell adhesion. Human osteoblast-like SaOS2 cells grew and spread well on the surfaces of the new titanium composites. The present study illustrated the feasibility of using the particulate-reinforced titanium composites as an orthopaedic implant material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Bone Tissue Engineering Materials · Titanium Alloys Microstructure and Properties · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (40)

Show source-provided references
1. Long M, Rack HJ (1998) Biomaterials 19:162110.1016/S0142-9612(97)00146-4 ↗
2. Wang K (1996) Mater Sci Eng A 213:13410.1016/0921-5093(96)10243-4 ↗
3. Williams DF (1982) Titanium and titanium alloys, biocompatibility of clinical implant materials. CRC Press Inc., Florida10.1007/978-1-4757-1758-7 ↗
4. Bhola SM, Bhola R, Mishra B, Olson DL (2010) J Mater Sci 45:6179. doi: 10.1007/s10853-010-4711-110.1007/s10853-010-4711-1 ↗
5. Hsu HC, Tsou HK, Hsu SK, Wu SC, Lai CH, Ho WF (2011) J Mater Sci 46:1369. doi: 10.1007/s10853-010-4929-y10.1007/s10853-010-4929-y ↗
6. Currey JD (2006) Bones structure and mechanics. Princeton University Press, New Jersey
7. Li YC, Xiong JY, Wong CS, Hodgson PD, Wen CE (2009) Tissue Eng A 15:3151. doi: 10.1089/ten.TEA.2009.015010.1089/ten.tea.2009.0150 ↗
8. Li YC, Xiong JY, Hodgson PD, Wen CE (2010) J Alloy Compd 494:32310.1016/j.jallcom.2010.01.026 ↗
9. Gibson LG, Ashby MF (1997) Cellular solids: structure and properties. Cambridge University Press, Cambridge10.1017/CBO9781139878326 ↗
10. Smith AV, Chung DDL (1996) J Mater Sci 31:5961. doi: 10.1007/BF0115214610.1007/BF01152146 ↗
11. Liu PS, Liang KM (2001) J Mater Sci 36:5059. doi: 10.1023/A:101248392062810.1023/A:1012483920628 ↗
12. Wen CE, Yamada Y, Shimojima K, Chino Y, Hosokawa H, Mabuchi M (2002) J Mater Res 17:263310.1557/JMR.2002.0382 ↗
13. Li YC, Xiong JY, Lin JG, Forrest M, Hodgson PD, Wen CE (2007) Mater Forum 31:52
14. Liu B, Liu Y, He XY, Tang HP, Chen LF, Huang BY (2007) Metall Mater Trans A 38:2825. doi: 10.1007/s11661-007-9329-910.1007/s11661-007-9329-9 ↗
15. Esmaeelzadeh S, Simchi A, Lehmhus D (2005) Porous metals and metal foaming technology. Japan Institute of Metals, Kyoto
16. Ashby MF, Evans A, Fleck NA, Gibson LJ, Hutchinson JW, Wadlry HNG (2000) Metal foams: a design guide. Butterworth-Heinemann, USA
17. Ranganath S (1997) J Mater Sci 32(1):1
18. Badini C, Ubertalli G, Puppo D, Fino P (2000) J Mater Sci 35:3903. doi: 10.1023/a:100489370076210.1023/A:1004893700762 ↗
19. Li BS, Shang JL, Guo JJ, Fu HZ (2004) J Mater Sci 39:1131. doi: 10.1023/B:JMSC.0000012962.11500.6d10.1023/B:JMSC.0000012962.11500.6d ↗
20. Ibrahim IA, Mohamed FA, Lavernia EJ (1991) J Mater Sci 26:1137. doi: 10.1007/bf0054444810.1007/BF00544448 ↗
21. Liu Y, Chen LF, Tang HP, Liu CT, Liu B, Huang BY (2006) Mater Sci Eng 418:2510.1016/j.msea.2005.10.057 ↗
22. Elbir S, Yilmaz S, Toksoy AK, Guden M, Hall IW (2003) J Mater Sci 38:4745. doi: 10.1023/a:102742710283710.1023/A:1027427102837 ↗
23. Gofrey TMT, Goodwin PS, Ward-Close CM (2000) Adv Eng Mater 2:85. doi: 10.1002/(sici)1527-2648(200003)2:3<85:AID-ADEM85>3.0.co;2-u10.1002/(SICI)1527-2648(200003)2:3<85::AID-ADEM85>3.0.CO;2-U ↗
24. Canakci A (2011) J Mater Sci 46:2805. doi: 10.1007/s10853-010-5156-210.1007/s10853-010-5156-2 ↗
25. Hanawa T, Kaga M, Itoh Y, Echizenya T, Oguchi H, Ota M (1992) Biomaterials 13:2010.1016/0142-9612(92)90089-7 ↗
26. Palmieri A, Pezzetti F, Brunelli G et al (2008) J Mater Sci 19:2471. doi: 10.1007/s10856-008-3386-5
27. Keceli SA, Alanyali H (2004) Turk J Eng Env Sci 28:49
28. Li YC, Wong CS, Xiong JY, Hodgson PD, Wen CE (2010) J Dent Res 89:493. doi: 10.1177/002203451036367510.1177/0022034510363675 ↗
29. Schmalz G, Langer H, Schweikl H (1998) J Dent Res 77:177210.1177/00220345980770100401 ↗
30. Yamamoto A, Honma RMS (1998) J Biomed Mater Res 39:33110.1002/(SICI)1097-4636(199802)39:2<331::AID-JBM22>3.0.CO;2-E ↗
31. Li YC, Xiong JY, Wong CS, Hodgson PD, Wen CE (2009) Tissue Eng A 15:3152. doi: 10.1089/ten.TEA.2009.0150
32. Wang XJ, Li YC, Xiong JY, Hodgson PD, Wen CE (2009) Acta Biomater 5:361610.1016/j.actbio.2009.06.002 ↗
33. Rodan SB, Imai Y, Thiede MA et al (1987) Cancer Res 47:4961
34. International Organization for Standardization (1999) Biological evaluation of medical devices. ISO10993-5 ANSI/AAMI, Arlington
35. Izquierdo-Barba I, Conde F, Olmo N, Lizarbe MA, Garcia MA, Vallet-Regi M (2006) Acta Biomater 2:44510.1016/j.actbio.2006.02.002 ↗
36. Lukito D, Xue JM, Wang J (2005) Mater Lett 59:326710.1016/j.matlet.2005.05.055 ↗
37. Que W, Sun Z, Zhou Y, Lam YL, Chan YC, Kam CH (2000) Thin Solid Films 359:17710.1016/S0040-6090(99)00746-4 ↗
38. Li YC, Xiong JY, Wong CS, Hodgson PD, Wen CE (2009) Mater Sci Forum 614:8510.4028/www.scientific.net/MSF.614.85 ↗
39. Geurtsen W (2002) Crit Rev Oral Biol Med 13:7110.1177/154411130201300108 ↗
40. Matsuno H, Yokoyama A, Watari F, Uo M, Kawasaki T (2001) Biomaterials 22:125310.1016/S0142-9612(00)00275-1 ↗