Spark plasma sintering synthesis and mechanical spectroscopy of the ω-Al0.7Cu0.2Fe0.1 phase
Source abstract
Abstract
Starting from a mixture of Al–Cu–Fe quasicrystalline (QC) particles and Al powder, a fully dense and almost Al–Cu–Fe ω single-phase alloy was produced by spark plasma sintering. This technique allows synthesising large samples with sizes suitable for mechanical spectroscopy experiments. Mechanical spectroscopy was selected because it is a relevant tool for detecting the presence of structural defects at both nano and microscopic scales. Young’s moduli were measured in the 15 kHz range as a function of temperature by the resonant frequency method. Young’s moduli behave similarly for typical metals and exhibit values that are comparable to those of the Al–Cu–Fe QC phase. The damping coefficient Q−1 was determined at various temperatures between room temperature and 840 K over a large frequency range, i.e. between 10−3 and 10 Hz. The results suggest that solid friction effects do occur. In addition, a relaxation peak is observed in the intermediate temperature range.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quasicrystal Structures and Properties · Microstructure and mechanical properties · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Laplanche G, Joulain A, Bonneville J, Gauthier-Brunet V, Dubois S, El Kabir T (2010) J Mat Res 25:95710.1557/JMR.2010.0118 ↗
2. Bonneville J, Laplanche G, Joulain A, Gauthier-Brunet V, Dubois S (2010) J Phys 240:012013
3. Tsaï AP, Aoki K, Akihisa I, Masumoto T (1993) J Mater Res 8:510.1557/JMR.1993.0005 ↗
4. Taupin V, Berbenni S, Fressengeas C, Bouaziz O (2010) Acta Mat 58:523210.1016/j.actamat.2010.05.037 ↗
5. Bonneville J, Caillard D, Guyot P (2008). In: Hirth JP (ed) Dislocations in Solids, vol 14. Elsevier, North-Holland, pp 251–332
6. Bresson L, Gratias D (1993) J Non-Cryst Solids 153–154:46810.1016/0022-3093(93)90397-G ↗
7. Huttunen-Saarivirta E (2004) J Alloys Comp 363:15410.1016/S0925-8388(03)00445-6 ↗
8. Giacometti E, Baluc N, Bonneville J (1999) Phil Mag Lett 79:110.1080/095008399177598 ↗
9. Laplanche G, Joulain A, Bonneville J, Gauthier-Brunet V, Dubois S to be published
10. Giacometti E, Fikar J, Baluc N, Bonneville J (2002) Phil Mag Lett 82:18310.1080/09500830110117798 ↗
11. Mazot P, de Fouquet J, Woirgard J, Pautrot JP (1992) J Phys III:751
12. Spinner S, Reichard TW, Tefft WE (1960) J Res ASTM 64A:147
13. Spinner S, Tefft WE (1961) J Res ASTM 65A:167
14. Nowick AS, Berry BS (1972) Anelastic relaxation in solids. Academic Press, New York
15. Woirgard J, Mazot P, Rivière A (1981) J Phys 10:1135
16. Bown MG, Brown PJ (1956) Acta Crystallogr A 9:91110.1107/S0365110X56002576 ↗
17. Laplanche G, Joulain A, Bonneville J, Gauthier-Brunet V, Dubois S (2010) Mat Sci Eng A 527:451510.1016/j.msea.2010.02.049 ↗
18. Comte C, von Stebut J (2002) Surf Coat Technol 154:4210.1016/S0257-8972(01)01706-6 ↗
19. Tang F, Gnäupel-Herold T, Prask H, Anderson IE (2005) Mat Sci Eng A 399:9910.1016/j.msea.2005.02.027 ↗
20. Tang F, Meeks H, Spowart JE, Gnaeupel-Herold T, Prask H, Anderson IE (2004) Mat Sci Eng A 386:19410.1016/j.msea.2004.07.040 ↗
21. Molénat G, Durand L, Galy J, Couret A (2010) J Metall 2010:110.1155/2010/145431 ↗
22. Yang C, Jin SZ, Liang BY, Jia SS (2009) J Eur Ceram Soc 29:18110.1016/j.jeurceramsoc.2008.05.035 ↗
23. Laplanche G, Joulain A, Bonneville J, Schaller R, El Kabir T (2010) J Alloys Comp 493:45310.1016/j.jallcom.2009.12.124 ↗
24. Gadaud P (2006) Int J Mater Prod Technol 26:32610.1504/IJMPT.2006.009473 ↗
25. Gadaud P, Pautrot S (2011) In: The 16th international conference on internal friction and mechanical spectroscopy (ICIFMS 16) held in Lausanne on July 3–8, 2011
26. Gadaud P, Pautrot S (2004) Mat Sci Eng A 370:42210.1016/j.msea.2003.08.111 ↗
27. Tang F, Anderson IE, Gnaupel-Herold T, Prask H (2004) Mat Sci Eng A 383:36210.1016/j.msea.2004.05.081 ↗
28. Tanaka K, Mitarai Y, Koiwa M (1996) Phil Mag A 73:171510.1080/01418619608243008 ↗
29. Vanderwal JJ, Zhao P, Walton D (1992) Phys Rev B 46:50110.1103/PhysRevB.46.501 ↗
30. Köster U, Liu W, Liebertz H, Michel M (1993) J Non-Cryst Solids 153–154:44610.1016/0022-3093(93)90393-C ↗
31. Schoeck G, Bisogni E, Shyne J (1964) Acta Metall 12:146610.1016/0001-6160(64)90141-5 ↗
32. Rivière A, Gadaud P, Woirgard J (1993) In: Bhagat RB (ed) Damping of multiphase inorganic materials. ASM International, Materials Park
33. Pautrot S, Mazot P (1993) Revue de Métall 90:166510.1051/metal/199390121665 ↗
34. Numakura H, Kurita N, Koiwa M, Gadaud P (1999) Phil Mag 79:94310.1080/01418619908210341 ↗
35. Phragmen G (1950) J Inst Met 77:489