journal article·2006-08

Strain whitening of a thermoplastic olefin material

P. Wang, I. M. Hutchings, S. J. Duncan, L. Jenkins, E. Woo

Journal of Materials Science· Volume 41· Issue 15
Publisher page

Abstract

This paper presents research work on the characteristics and micro mechanism of strain whitening of a thermoplastic olefin material. Systematic tensile tests have been carried out to investigate the relation between strain whitening extent and external factors, including the deformation employed and the environmental temperature. A new optical method has been developed for the measurement of strain on polymer tensile samples. Applying this method relation between whitening level (grey level change) and strain has been studied. A new concept of ‘strain whitening sensitivity’ has been proposed and defined as the strain whitening induced by unit deformation or strain. Non-monotonic relation between whitening level and strain has been found. Strained and fractured samples were observed with A JEOL 5800 LV SEM for the micro mechanism investigation. The change of microstructure on the sample surface has been extensively observed and the combined effects of small ridges and micro-voids on the scattering efficiency of the strained surface were regarded as reasons for the non-monotonic relation between whitening level and strain.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Mechanical Behavior of Composites · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. Moore EP Jr (1996) In: Polypropylene handbook, Hanser Publishers
2. Sanford W, Dawson R, Deanr D (1998) In: Proceedings of the Fifth International Conference on TPOs in Automotive’98, 12–14 October 1998, Michigan, USA
3. Exxon Company (information leaflets), the Fifth International Conference on TPOs in Automotive’98, 12–14 October 1998, Michigan, USA
4. Florence R, Sherman K (1997) Automotive Eng 105(5):39
5. Chu J (1998) In: Proceedings of International SAMPE Symposium and Exhibition, vol. 43, No. 2, 1998, p 1149–1157, ISSN: 0891–0138 CODEN: ISSEEG. Conference: Proceedings of the 1998 43rd International SAMPE Symposium and Exhibition. Part 2 (of 2), May 31–Jun 4 1998, Anaheim, CA, USA
6. Chu J, Rumao L, Coleman B (1998) Polym Eng Sci 38(11):190610.1002/pen.10361 ↗
7. Wang P, Hutchings IM, Duncan SJ, Jenkins L, SAE Technical paper Series, 1999–01-0243; also published in SAE Transactions, Journal of Materials and Manufacturing, 108 (1999) 134–150
8. Wang P, Hutchings IM Duncan SJ, Jenkins L (1999) In: Proceedings of the 6th International Conference on TPO in Automotive, October 25–27, 1999, Novi, Michigan, USA
9. Wang P, Hutchings IM, Duncan SJ, Jenkins L, Woo E (2000) In: Proceedings of SPE Automotive TPO Global Conference 2000, October 2–4, 2000, Dearborn, Michigan, USA, pp 107–119
10. Hutchings IM, Wang P, Parry GC (2003) Surf Coat Tech 165:18610.1016/S0257-8972(02)00584-4 ↗
11. Wang PZ, Hutchings IM, Duncan SJ, Jenkins L, Woo E (2000) In: Proceedings of the 7th International Conference on TPO in Automotive, October 23–25, 2000, Novi, Michigan, USA
12. Wang PZ, Hutchings IM, Duncan SJ, Jenkins L (2001) In: Proceedings of SPE Automotive TPO Global Conference 2001, October 1–3, 2001, Dearborn, Michigan, USA
13. Liu Y, Truss RW (1995) J Polym Sci Pol Phys 33(5):81310.1002/polb.1995.090330510 ↗
14. Liu Y, Kennard CHL, Truss RW, Calos NJ (1997) Polymer 38(11):279710.1016/S0032-3861(97)85617-0 ↗
15. Liu Y, Truss RW (1994) J Polym Sci Pol Phys 32:203710.1002/polb.1994.090321210 ↗
16. Duncan S (1998) In: Proceedings of the Fifth International Conference on TPOs in Automotive’98, October 12–14, 1998, Michigan, USA
17. Young RJ, Lovell PA (1991) Introduction to polymers, 2nd edn. Chapman and Hall10.1007/978-1-4899-3176-4 ↗
18. Mascia L (1974) The role of additives in plastics, Edward Arnald (Publishers) Ltd
19. Clark DT, Feast WJ (1978) Polymer surface, John Wiley and Sons