journal article·2006-11-27

Organoclay effect on transverse compressive strength of glass/epoxy nanocomposites

Jia-Lin Tsai, Jui-Ching Kuo, Shin-Ming Hsu

Journal of Materials Science· Volume 41· Issue 22
Publisher page

Abstract

This research focuses on the fabrication of glass fiber/epoxy nanocomposites containing organoclay as well as understanding the organoclay effect on the transverse compressive strength of nanocomposites. To demonstrate the organoclay effect, three different loadings of organoclay were dispersed, respectively, in the epoxy resin using a mechanical mixer followed by sonication. The corresponding glass/epoxy nanocomposites were produced by impregnating dry glass fiber with organoclay epoxy compound through a vacuum hand lay-up procedure. Unidirectional block specimens were employed for transverse compression tests on a hydraulic MTS machine. Experimental observations indicate that glass/epoxy nanocomposites containing organoclay exhibit higher transverse compressive strength than conventional composites. Furthermore, the failure mechanisms for all tested specimens were found to be fiber and matrix debonding. Therefore, results indicate that the increasing characteristic in transverse failure stress may be ascribed to the enhanced fiber/matrix adhesion modified by the organoclay.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Silicone and Siloxane Chemistry · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. Collings TA (1974) Composites 5(3):10810.1016/0010-4361(74)90548-5 ↗
2. Bazhenov SL, Kozey VV (1991) J Mater Sci 26(10):267710.1007/BF02387736 ↗
3. Lowe A (1996) J Mater Sci 31(4):100510.1007/BF00352901 ↗
4. Thostenson ET, Li C, Chou TW (2005) Compos Sci Technol 65(3–4):49110.1016/j.compscitech.2004.11.003 ↗
5. Pinnavaia TJ, Beall GW (2000) In: Polymer-Clay Nanocomposites. John Wiley & Sons, New York
6. Usuki A, Kawasumi M, Kojima Y, Okada A, Kurauchi T, Kamigaito O (1993) J Mater Res 8(5):117410.1557/JMR.1993.1174 ↗
7. Usuki A, Kojima Y, Kawasumi M, Okada A, Fukushima Y, Kurauchi T, Kamigaito O (1993) J Mater Res 8(5):117910.1557/JMR.1993.1179 ↗
8. Cho JW, Paul DR (2001) Polymer 42(3):108310.1016/S0032-3861(00)00380-3 ↗
9. Chin IJ, Thurn-Albrecht T, Kim HC, Russell TP, Wang J (2001) Polymer 42(13):594710.1016/S0032-3861(00)00898-3 ↗
10. Ratna D, Manoj NR, Varley R, Singh Raman RK, Simon GP (2003) Polym Int 52(9):140310.1002/pi.1166 ↗
11. Yano K, Usuki A, Okada A, Kurauchi T, Kamigaito O (1993) J Polym Sci A Polym Chem 31(10):249310.1002/pola.1993.080311009 ↗
12. Dennis HR, Hunter DL, Chang D, Kim S, White JL, Cho JW, Paul DR (2001) Polymer 42(23):951310.1016/S0032-3861(01)00473-6 ↗
13. Okada A, Usuki A (1995) Mater Sci Eng C 3(2):10910.1016/0928-4931(95)00110-7 ↗
14. Haque A, Shamsuzzoha M, Huussain F, Dean D (2003) J Compos Mater 37(20):182110.1177/002199803035186 ↗
15. Becker O, Varley RJ, Simon GP (2003) J Mater Sci Lett 22(20):141110.1023/A:1025703212174 ↗
16. Technical data sheet, Nanocor Inc
17. Liu T, Tjiu WC, Tong Y, He C, Goh SS (2004) J Appl Sci 94(3):123610.1002/app.21033 ↗