journal article·2007-07

Microhardness of quenched and annealed isotactic polypropylene

Thomas Koch, Sabine Seidler, Erich Halwax, Sigrid Bernstorff

Journal of Materials Science· Volume 42· Issue 14
Publisher page

Abstract

The influence of molecular weight on the microhardness of quenched and subsequently annealed isotactic PP is shown. A clear dependence of microhardness on molecular weight and annealing temperature was detected. Even in the quenched state, where it was difficult to detect morphological differences between the materials, microhardness shows differences. In all states, quenched and annealed, the lower molecular weight samples have the higher hardness values. Up to an annealing temperature of 70 °C the hardness increases only slightly in all samples, above 80 °C a more pronounced increase was observed. For the microhardness of the samples annealed at 140 °C the ratio of the amorphous to the crystalline length is the dominating morphological parameter.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer crystallization and properties · Polymer Nanocomposites and Properties · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Zannetti R, Celotti G, Fichera A, Francesconi R (1969) Makromol Chem 128:13710.1002/macp.1969.021280111 ↗
2. Bodor G, Grell M, Kello A (1964) Faserforsch Textil Technol 15:527
3. Gezowich DM, Geil PH (1968) Polym Eng Sci 8:20210.1002/pen.760080305 ↗
4. Hendra PJ, Vile J, Willis HA, Zichy V, Cudby MEA (1984) Polymer 25:78510.1016/0032-3861(84)90007-7 ↗
5. Wang Z-G, Hsiao BS, Srinivas S, Brown GM, Tsou AH, Cheng SZD, Stein RS (2001) Polymer 42:756110.1016/S0032-3861(01)00286-5 ↗
6. Androsch R, Wunderlich B (2001) Macromolecules 34:595010.1021/ma010260g ↗
7. Alberola N, Fugier M, Petit D, Fillon B (1995) J Mater Sci 30:118710.1007/BF00356118 ↗
8. Grubb DT, Yoon DY (1986) Polym Commun 27:84
9. Gerardi F, Piccarolo S, Martorana A, Sapoundjieva D (1997) Macromol Chem Phys 198:397910.1002/macp.1997.021981216 ↗
10. Alberola N, Fugier M, Petit D, Fillon B (1995) J Mater Sci 30:86010.1007/BF01178418 ↗
11. Ferrer-Balas D, Maspoch ML, Martinez AB, Santana OO (2001) Polymer 42:169710.1016/S0032-3861(00)00487-0 ↗
12. Baltá-Calleja FJ, Fakirov S (2000) Microhardness of polymers. Cambridge University Press, Cambridge10.1017/CBO9780511565021 ↗
13. Baltá-Calleja FJ (1985) Adv Polym Sci 66:11710.1007/3-540-13779-3_19 ↗
14. Martínez-Salazar J, García Tijero JM, Baltá-Calleja FJ (1988) J Mater Sci 23:86210.1007/BF01153980 ↗
15. Amitay-Sadovsky E, Wagner HD (1999) J Polym Sci B 37:52310.1002/(SICI)1099-0488(19990315)37:6<523::AID-POLB4>3.0.CO;2-2 ↗
16. Osawa S, Porter RS (1996) Polymer 37:209510.1016/0032-3861(96)85854-X ↗
17. Schreyer GW, Zwinzscher K, Lüpke T, Wutzler A (1998) Kaut Gummi Kunstst 51:35
18. Martin B, Perena JM, Pastor JM, de Saja JA (1986) J Mater Sci Lett 5:102710.1007/BF01730272 ↗
19. Labour T, Ferry L, Gauthier C, Hajji P, Vigier G (1999) J Appl Polym Sci 74:19510.1002/(SICI)1097-4628(19991003)74:1<195::AID-APP24>3.0.CO;2-8 ↗
20. Seidler S, Koch T (2004) Macromol Symp 217:32910.1002/masy.200451329 ↗
21. Flores A, Aurrekoetxea J, Gensler R, Kausch HH, Balta-Calleja FJ (1998) Colloid Polym Sci 276:78610.1007/s003960050311 ↗
22. Lorenzo V, Perena JM, Fatou JG (1989) J Mater Sci Lett 8:145510.1007/BF00720222 ↗
23. Chua SM, Henderson PJ (1991) J Mater Sci Lett 10:137910.1007/BF00735684 ↗
24. Oliver WC, Pharr GM (1992) J Mater Res 7:156410.1557/JMR.1992.1564 ↗
25. Lamberti G, Brucato V (2003) J Polym Sci Phys 41:99810.1002/polb.10411 ↗
26. Martorana A, Piccarolo S, Scichilone F (1997) Macromol Chem Phys 198:59710.1002/macp.1997.021980231 ↗
27. Scharnowski D (2005) PhD thesis, University Halle-Wittenberg
28. McAllister PB, Carter TJ, Hinde RM (1978) J Polym Sci Phys 16:4910.1002/pol.1978.180160105 ↗
29. Vittoria V (1986) J Polym Sci Phys 24:45110.1002/polb.1986.090240218 ↗
30. Caldas V, Brown GR, Nohr RS, MacDonald JG, Raboin LE (1994) Polymer 35:89910.1016/0032-3861(94)90931-8 ↗
31. Phillips RA, Wolkowicz MD (2005) In: Pasquini N (ed) Polypopylene handbook. Hanser, Munich, p 163
32. Vittoria V (1989) J Macromol Sci Phys B 28:9710.1080/00222348908212329 ↗
33. Baltá-Calleja FJ, Santa Cruz C, Bayer RK, Kilian HG (1990) Colloid Polym Sci 268:44010.1007/BF01411002 ↗
34. Robelin-Souffache E, Rault J (1989) Macromolecules 22:358110.1021/ma00199a015 ↗
35. Varga J (1995) In: Karger-Kocsis J (ed) Polypropylene. Structure, blends and composites, vol 1. Chapman & Hall10.1007/978-94-011-0567-5 ↗