The effect of the reduction of carbon content on the toughness of high chromium white irons in the as-cast state
Source abstract
Abstract
Three high chromium white cast irons were examined in the as-cast state to determine the effect of the carbon content on the fracture toughness. The plane strain fracture toughness K-Ic and the fracture strength were measured for each alloy. X-ray mapping was used to identify the phases on the fracture surfaces. Scanning electron fractography and optical microscopy were used to determine the volume fraction of each phase on the fracture surfaces. It was found that most fracture occurred in the eutectic carbides, but that for the alloys with a reduced volume fraction of eutectic carbides, a small amount of crack propagation occurred in the austenitic dendrites. This change in crack path correlated with an increase in fracture toughness. The Ritchie-Knott-Rice model of brittle fracture was applied. It was found to sensibly predict the critical length for fracture for each alloy. Deep etching was employed to examine the distribution of eutectic carbides. It was found that the eutectic carbides formed a continuous network in each case. (C) 2004 Kluwer Academic Publishers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. C. P. Tabrett, I. R. Sare and M. R Ghomashci, Intern. Mater. Rev. 41 (1996) 59.10.1179/imr.1996.41.2.59 ↗
2. D. E. Deisburg, in “Fracture Toughness and Slow Stable Cracking,” Proceedings of the 1973 National Symposium on Fracture Mechanics Part I, ASTM STP 559 (ASTM, Philadelphia, 1974) p. 3.
3. M. Radulovic, M. Fiset, K. Peev and M. Tomovic, J. Mater. Sci. 29 (1994) 5085.10.1007/BF01151101 ↗
4. S. K. Hann and J. D. Gates, ibid. 32 (1997) 1249.10.1023/A:1018544204267 ↗
5. G. L. F. Powell, Metals Forum 3 (1980) 37.
6. K. H. Zum Gahr, Zietschrift fur Metallkunde 71 (1980) 103.
7. R. W. Durman, The British Foundryman 74 (1981) 45.
8. M. A. Qian, W. C. Chang and S. Harada, J. Mater. Sci. 31 (1996) 1865.10.1007/BF00372201 ↗
9. S. B. Biner, Canadian Metall. Quart. 24 (1985) 155.10.1179/cmq.1985.24.2.155 ↗
10. S. B. Biner, Canadian Metall. Quart. 24 (1985) 163.10.1179/cmq.1985.24.2.163 ↗
11. A. Kootsookos, J. D. Gates and R. A. Eaton, Cast Metals 7 (1995), 239.10.1080/09534962.1995.11819184 ↗
12. F. Maratray, Trans. Amer. Foundr. Soc. 79 (1971) 121.
13. R. O. Ritchie, J. F. Knott and J. R. Rice, J. Mech. Phys. Sol. 21 (1973) 395.10.1016/0022-5096(73)90008-2 ↗
14. Australian Standards Association, Australian Standards, AS2027, Australian Standards Association, Australia, 1985, p. 12.
15. T. E. Norman, United States Patent, 4 547 221 (1985) p. 58.
16. J. Shen and Q. D. Zhou, Cast Metals 1 (1988) 79.10.1080/09534962.1988.11818951 ↗
17. F. Maratray and A. Poulalion, Trans. Amer. Foundrymen's Soc. 90 (1982) 795.
18. K. H. Zum Gahr and W. G. Scholz, J. Metals 32 (1980) 38.
19. American Society For Testing And Materials, Annual Book of A.S.T.M Standards, A.S.T.M E-399-90 (1990) vol. 3.01, p. 509.
20. P. N. Crepeau and S. D. Antolovich, Trans. Amer. Foundr. Soc. 94 (1986) 503.
21. American Society For Testing And Materials, Annual Book of A.S.T.M Standards, A.S.T.M E562-89 (1993) Vol. 3.01, p. 612.
22. E. Underwood, “Quantitative Stereology” (Addison-Wesley Publishing Company, Massachesetts, 1970) p. 148.
23. American Society For Testing And Materials, 1993, Annual Book of A.S.T.M Standards, A.S.T.M E562-89, Vol. 3.01, p. 206.
24. G. L. F. Powell and P. G. Lloyd, Metallography 14 (1981) 271.10.1016/0026-0800(81)90032-X ↗
25. G. L. F. Powell and G. Lairdii, J. Mater. Sci. 27 (1992) 29.10.1007/BF02403640 ↗
26. J. R. Griffiths and D. R. J. Owen, J. Mech. Phys. Solids 19 (1971) 419.10.1016/0022-5096(71)90009-3 ↗
27. G. E. Dieter, “Mechanical Metallurgy,” 3rd ed. (McGraw Hill Book Company, Singapore, 1986) p. 80.
28. A. P. Green and B. B. Hundy, J. Mech. Phys. Solids 16 (1956) 205.
29. T. H. Courtney, in “Mechanical Behaviour of Materials” (McGraw-Hill Publishing Company, Singapore, 1990) p. 380.
30. J. R. Rice and M. A. Johnson, in “Inelastic Behaviour of Solids,” edited by M. F. Kanninen et al. (McGraw-Hill, New York, 1970) p. 641.
31. W. Zhou, B. Voss and J. G. Blauel, Scripta Metallurgica et Materialia 2 (1992) 1411.10.1016/0956-716X(92)90658-2 ↗