journal article·2014-02

Sintering mechanisms of blended Ti6Al4V powder from diffusion path analysis

Xiaoyan Xu, Guiru Liu Nash, Philip Nash

Journal of Materials Science· Volume 49· Issue 3
Publisher page

Abstract

The sintering of master alloy-blended Ti6Al4V powder has been investigated to elucidate the mechanisms of sintering. Both blended powder compacts and diffusion couple samples were investigated using backscattered imaging and energy dispersive analysis to determine the phases present, and the diffusion path for sintering which has not been previously reported for this system. Transient liquid-phase sintering does not occur, and it is shown for the first time that the reason for the rapid sintering of this material in the temperature range of 1000–1150 °C is due to enhanced diffusion kinetics resulting from a combination of the concentration gradient and stress induced by a phase transformation in the ternary system. The results of this study have implications for the development of blended master alloy combinations in other powder metallurgy systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · Titanium Alloys Microstructure and Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Froes FH, Moxson VS, Duz VA (2004) Proc Int Conf Powder Metall Part Mater Metal Powder Ind Fed 7:178
2. Faller K, Froes FH (2001) JOM 53:2710.1007/s11837-001-0143-3 ↗
3. Xu X, Nash P, Yan Y, Zwitter T (2011) Int Conf Powder Metall Part Mater Metal Powder Ind Fed 7:137
4. Moxson VS, Senkov ON, Froes FH (1998) Int J Powder Metall 34:45
5. Ivasishin OM, Eylon D, Bondarchuk VI, Savvakin DG (2008) Defect Diffus Forum 277:17710.4028/www.scientific.net/DDF.277.177 ↗
6. Oh JM, Heo KH, Kim WB, Choi GS, Lim JW (2013) Mater Trans, JIM 54:11910.2320/matertrans.M2012304 ↗
7. Rivard JDK, Blue CA, Harper DC, Kiggans JO, Menchhofer PA, Mayotte JR, Jacobsen L, Kogut D (2005) JOM 11:5810.1007/s11837-005-0029-x ↗
8. Cantin GMD, Kean PL, Stone NA, Wilson R, Gibson MA, Yousuff M, Ritchie D, Rajakumar R (2011) Powder Metall 54:18810.1179/174329011X13045076771795 ↗
9. Ahmed M, Gazder AA, Savvakin DG, Ivasishin OM, Elena VP (2012) J Mater Sci 47:7013. doi: 10.1007/s10853-012-6652-310.1007/s10853-012-6652-3 ↗
10. Froes FH, Eylon D, Bomberger HB (1985) Titanium technology: present status and future trends. Titanium Development Association, Dayton
11. Abkowitz S, Abkowitz SM, Weihrauch PF, Wells MG (1993) In: Froe FH (ed) PM in aerospace, defense, and demanding applications. Metal Powder Industries Federation, New York
12. Froe FH, Mashl SJ, Hebeisen JC, Moxson VS, Duz VA (2004) JOM 56:4610.1007/s11837-004-0252-x ↗
13. Wang L, Shi H (2003) Aerosp Mater Tech 33:42
14. Liang W, Lang Z (2007) Trans Nonferrous Met Soc China 56:S639
15. Zwitter T, Xu X, Nash P (2009) Proc Int Conf Powder Metall Part Mater Metal Powder Ind Fed 7:169
16. Druz V, Moxson V, Chernenkoff R, Jandeskajnr W, Lynn J (2006) Met Powder Rep 61:1610.1016/S0026-0657(06)70736-6 ↗
17. Fujita T, Ogawa A, Ouchi C, Tajima H (1996) Mater Sci Eng A 213:14810.1016/0921-5093(96)10232-X ↗
18. Bolzoni L, Esteban PG, Ruiz-Navas EM, Gordo E (2011) Powder Metall 54:54310.1179/003258910X12827272082623 ↗
19. Richter KW (2006) In: Villars P (ed) “Al–V Phase Diagram (2000).” ASM Alloy Phase Diagrams Center. ASM International, Materials Park
20. Gong W (2006) In: Villars P (ed) “Al–V Phase Diagram (2004).” ASM Alloy Phase Diagrams Center. ASM International, Materials Park
21. Hayes FH (2006) In: Villars P (ed) “Al–Ti–V Phase Diagram (1995).” ASM Alloy Phase Diagrams Center. ASM International, Materials Park
22. Van L, JJ F (1990) Prog Solid St Chem 20:4710.1016/0079-6786(90)90007-3 ↗
23. Kang S (2004) Acta Mater 52:457310.1016/j.actamat.2004.06.015 ↗
24. Coble RL (1961) J Appl Phys 32:78710.1063/1.1736107 ↗
25. German RM (1996) Sintering Theory and Practice. Wiley, New York
26. Shi JD, Pu Z, Zhong Z, Zou D (1992) Scr Metall Mater 27:133110.1016/0956-716X(92)90079-T ↗
27. Norby P, Christensen AN (1986) Acta Chem Scand A 40:15710.3891/acta.chem.scand.40a-0157 ↗
28. Carlson ON, Kenney DJ, Wilhelm HA (1955) Trans Am Soc Met 47:520
29. Frazier WE, Cook J (1989) Scr Metall 23:3910.1016/0036-9748(89)90089-6 ↗
30. Sridharan S, Nowotny H, Wayne SF (1983) Monatsh Chem 114:12710.1007/BF00798317 ↗
31. Brandon JK, Pearson WB, Riley PW, Chieh C, Stokhuyzen R (1977) Acta Crystallogr Sect B 33:108810.1107/S0567740877005433 ↗
32. Dieter GE (1986) Mechanical Metallurgy, 2nd edn. McGraw-Hill, New York
33. Takahashi T, Minamino Y, Komatsu M (2008) Mater Trans, JIM 49:12510.2320/matertrans.MRA2007110 ↗
34. Wang H, Warnken N, Reed RC (2010) Mater Sci Eng A 528:62210.1016/j.msea.2010.09.013 ↗
35. Huang L, Cui Y, Chang H, Zhong H, Li J, Zhou L (2010) J Phase Equilib Diff 31:13510.1007/s11669-009-9641-8 ↗
36. Philibert J (1991) Atom Movements: Diffusion and Mass Transport in Solids. Les éditions de physique, Les Ulis
37. Esin YO, Bobrov H, Petrushevskii M, Gel’d B (1974) Metallurgy 5:86
38. Nassik M, Chrifi-Alaoui FZ, Mahdouk K, Gachon JC (2003) JALCOM 350:151