Microplasticity phenomena in thermomechanically strained nickel thin films
Source abstract
Abstract
Magnetron sputtered Ni thin films on both oxidised Si (100) and α-Al2O3 (0001) substrates of thickness 150–1000 nm were tested thermomechanically with a wafer curvature system, as well as in situ in a transmission electron microscope. The films on oxidised Si have a {111}-textured columnar microstructure with a mean grain size similar to the film thickness. On (0001) α-Al2O3 a near single crystal epitaxy with two growth variants is achieved leading to a significantly larger grain size. The thermomechanical testing was analysed in terms of the room temperature/high temperature flow stresses in the films and the observed thermoelastic slopes. It was found that the room temperature flow stresses increased with decreasing film thickness until a plateau of ∼1100 MPa was reached for films thinner than 400 nm. This plateau is attributed to the present experiments exerting insufficient thermal strain to induce yielding in these thinner films. At 500 °C the compressive flow stresses of the films show a competition between dislocation and diffusion mediated plasticity. A size effect is also observed in the thermoelastic slopes of the films, with thinner films coming closer to the slope predicted by mismatch in thermal expansion coefficients. It is put forward here that this is due to a highly inhomogeneous stress distribution in the films arising from the grain size distribution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Nix WD (1989) Metall Trans A 20A:221710.1007/BF02666659 ↗
2. Kobrinsky MJ, Thompson CV (2000) Acta Mater 48:62510.1016/S1359-6454(99)00403-6 ↗
3. Dehm G, Balk TJ, Edongué H, Arzt E (2003) Microelectr Eng 70:41210.1016/S0167-9317(03)00395-2 ↗
4. Vinci RP, Forrest SA, Bravman JC (2002) J Mater Res 17:186310.1557/JMR.2002.0275 ↗
5. Baker SP, Keller-Flaig R-M, Shu JB (2003) Acta Mater 51:301910.1016/S1359-6454(03)00113-7 ↗
6. Hall EO (1951) Proc R Soc London B 64:74710.1088/0370-1301/64/9/303 ↗
7. Petch NJ (1953) Iron Steel Inst 174:25
8. Black JR (1969) Proc IEEE 9:158710.1109/PROC.1969.7340 ↗
9. Ohring M (2002) Materials science of thin films, 2nd edn. Academic Press, New York, p 735
10. Thompson CV, Carel R (1996) J Mech Phys Solids 44:65710.1016/0022-5096(96)00022-1 ↗
11. Westmacott KH, Hinderberger S, Dahmen U (2001) Philos Mag A 81:154710.1080/01418610108214362 ↗
12. Freund LB (1987) J Appl Mech 54:55310.1115/1.3173068 ↗
13. Gao H, Zhang L, Nix WD, Thompson CV, Arzt E (1999) Acta Mater 47:286510.1016/S1359-6454(99)00178-0 ↗
14. Weiss D, Gao H, Arzt E (2001) Acta Mater 49:239510.1016/S1359-6454(01)00168-9 ↗
15. von Blanckenhagen B, Gumbsch P, Arzt E (2003) Philos Mag Lett 83:110.1080/0950083021000050287 ↗
16. Stoney GG (1909) Proc R Soc London A 82:17210.1098/rspa.1909.0021 ↗
17. Balk TJ, Dehm G, Arzt E (2003) Acta Mater 51:221
18. Eiper E, Keckes J, Martinschitz K, Zizak I, Cabié M, Dehm G (2007) Acta Mater 55:194110.1016/j.actamat.2006.10.052 ↗
19. Wellner P, Dehm G, Kraft O, Arzt E (2004) Z Metallkd 95:76910.3139/146.018020 ↗
20. Rajagopalan J, Han JH, Saif MTA (2008) Scripta Mater 59:73410.1016/j.scriptamat.2008.06.010 ↗
21. Phillips MA, Spolenak R, Tamura N, Brown WL, MacDowell AA, Celestre RS, Padmore HA, Batterman BW, Arzt E, Patel JR (2004) Microelectr Eng 75:11710.1016/j.mee.2003.12.053 ↗
22. Wellner P (2003) Thermo-mechanical behaviour of NiAl thin films, Dissertation, Universität Stuttgart, p 65