journal article·2014-05Open access

Comminution limit (CL) of particles and possible implications for pumped storage reservoirs

J. E. Field, M. Farhat, S. M. Walley

Journal of Materials Science· Volume 49· Issue 10

Abstract

Comminution (fragmentation) of solid particles is important in a range of technologies. An interesting effect is the so-called comminution limit (CL), which is effectively a brittle/ductile transition. Above the CL particles fail by fracture. However, as particle size decreases the amount of stored energy in the particle also decreases and eventually there is no longer sufficient stored energy in the particle to propagate a crack and the particle flows plastically. The CL depends on the hardness, H, and the toughness, K Ic. In mountainous countries, two-reservoir systems are used to generate and store power. When power is needed, water runs through the turbines to the lower reservoir. If there is excess power, water is pumped to the upper reservoir. This recycling of liquid through the turbines can break up entrained particles. Previous work in this area has been primarily concerned with sedimentation of the particles. The research reported in this paper uses the CL to calculate the particle sizes produced for different materials including different rock types. Interestingly, the particle sizes predicted mainly fall in the range where they sediment near the upper water surface. In such cases, the surface layers become opaque to sunlight and plant and animal life will be affected. It is suggested that the CL provides additional information which would assist research in this area. Where H and K Ic are not known for a particular rock type they should be measured.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mineral Processing and Grinding · Minerals Flotation and Separation Techniques · Non-Destructive Testing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Shishacov N (1938) Mosaic blocks of silicate glasses. Tech Phys USSR 5:666–675
2. Bonalumi M, Anselmetti FS, Kaegi R, Wuest A (2011) Particle dynamics in high-Alpine proglacial reservoirs modified by pumped-storage operation. Water Resour Res 47:W0952310.1029/2010WR010262 ↗
3. Miracle RD, Gardner A (1980) Review of the literature on the effects of pumped storage operations on Ichthyofauna. In: Clugston JP (ed) Proceedings of the Clemson workshop on environmental impacts of pumped storage hydroelectric operations. US Fish and Wildlife Service, Washington DC, pp 40–53
4. Potter DU, Stevens MP, Meyer JL (1982) Changes in physical and chemical variables in a new reservoir due to pumped-storage operations. Water Resour Res 18:627–633
5. Bezinge A (1987) Glacial meltwater streams, hydrology and sediment transport: the case of the grande dixence hydroelectricity scheme. In: Gurnell AM, Clark MJ (eds) Glacio-fluvial sediment transfer: an alpine perspective. Wiley, Chichester, pp 473–498
6. Hofmann A, Dominik J (1995) Turbidity and mass concentration of suspended matter in lake water: a comparison of two calibration methods. Aquat Sci 57:54–6910.1007/BF00878026 ↗
7. Davies-Colley RJ, Smith DG (2001) Turbidity, suspended sediment, and water clarity: a review. J Amer Water Resour Assoc 37:1085–110110.1111/j.1752-1688.2001.tb03624.x ↗
8. Bunn SE, Arthington AH (2002) Basic principles and ecological consequences of altered flow regimes for aquatic biodiversity. Environ Manage 30:492–50710.1007/s00267-002-2737-0 ↗
9. Bühler J, Siegenthaler C, Wüest A (2005) Turbidity currents in an Alpine pumped-storage reservoir. In: Lee JHW, Lam KH (eds) Environmental hydrology and sustainable water management. A.A Balkema, Rotterdam, pp 239–244
10. Finger D, Schmid M, Wüest A (2006) Effects of upstream hydropower operation on riverine particle transport and turbidity in downstream lakes. Water Resour Res 42:W0842910.1029/2005WR004751 ↗
11. Anselmetti FS, Buhler R, Finger D, Girardclos S, Lancini A, Rellstab C, Sturm M (2007) Effects of Alpine hydropower dams on particle transport and lacustrine sedimentation. Aquat Sci 69:179–19810.1007/s00027-007-0875-4 ↗
12. Chanudet V, Filella M (2007) The fate of inorganic colloidal particles in Lake Brienz. Aquat Sci 69:199–21110.1007/s00027-007-0877-2 ↗
13. Jaun L, Finger D, Zeh M, Schurter M, Wüest A (2007) Effects of upstream hydropower operation and oligotrophication on the light regime of a turbid peri-alpine lake. Aquat Sci 69:212–22610.1007/s00027-007-0876-3 ↗
14. Anderson MA (2010) Influence of pumped-storage hydroelectric plant operation on a shallow polymictic lake: predictions from 3-D hydrodynamic modeling. Lake Reserv Manag 26:1–1310.1080/10402380903479102 ↗
15. Frank FC, Lawn BR (1967) On the theory of Hertzian fracture. Proc R Soc Lond A 299:291–30610.1098/rspa.1967.0137 ↗
16. Sargent GA, Chen Y-L, Conrad H (1989) Hertzian fracture of pyrex glass in impact loading. In: Ludema KC (ed) Wear of materials. American Society of Mechanical Engineers, New York, pp 339–347
17. Hobbs DW (1964) The tensile strength of rocks. Int J Rock Mech Min Sci 1:385–39610.1016/0148-9062(64)90005-1 ↗
18. Rumpf H, Schönert K (1972) Die Brucherscheinungen in Kugeln bei elastischen sowie plastischen Verformungen durch Bruckbeanspruchung. Dechema Monograph 69:51–86
19. Kendall K (1978) Complexities of compression failure. Proc R Soc Lond A 361:245–26310.1098/rspa.1978.0101 ↗
20. Hopkinson B (1914) The effects of the detonation of gun-cotton. Trans North-East Coast Inst Eng Shipbuild 30:199–217
21. Bowden FP, Brunton JH (1961) The deformation of solids by liquid impact at supersonic speeds. Proc R Soc Lond A 263:433–45010.1098/rspa.1961.0172 ↗
22. Kolsky H, Rader D (1968) Stress waves and fracture. In: Liebowitz H (ed) Fracture, vol 1. Academic, New York, pp 533–569
23. Boddy RGHB (1943) Microscope observations of the crushing of coal. Nature 151:5410.1038/151054a0 ↗
24. Parish BM (1967) Effect of rank and particle size on plastic behaviour of coal. Br J Appl Phys 18:233–24010.1088/0508-3443/18/2/311 ↗
25. Steier K, Schönert K (1972) Verformung und Bruchphänomene unter Druckbeanspruchung von sehr kleinen Körnen aus Kalkstein, Quarz und Polystyrol. Dechema Monograph 69:167–192
26. Puttick KE (1979) Energy scaling, size effects and ductile-brittle transitions in fracture. J Phys D Appl Phys 12:L19–L2310.1088/0022-3727/12/3/001 ↗
27. Kendall K (1978) The impossibility of comminuting small particles by compression. Nature 272:710–71110.1038/272710a0 ↗
28. Karihaloo BL (1979) A note on complexities of compression failure. Proc R Soc Lond A 368:483–49310.1098/rspa.1979.0142 ↗
29. Hagan JT (1979) Micromechanics of crack nucleation during indentations. J Mater Sci 14:2975–298010.1007/BF00611482 ↗
30. Hagan JT (1981) Impossibility of fragmenting small particles: brittle–ductile transition. J Mater Sci 16:2909–291110.1007/BF02402857 ↗
31. Hird JR, Field JE (2004) Diamond polishing. Proc R Soc Lond A 460:3547–356810.1098/rspa.2004.1339 ↗
32. Williamson DM, Proud WG (2011) The conch shell as a model for tougher composites. Int J Mater Eng Innov 2:149–16410.1504/IJMATEI.2011.039506 ↗
33. Tabor D (1951) The hardness of metals. Clarendon Press, Oxford
34. Whitney DL, Broz M, Cook RF (2007) Hardness, toughness, and modulus of some common metamorphic minerals. Am Min 92:281–28810.2138/am.2007.2212 ↗
35. Zapryanov Z, Tabakova S (1999) Dynamics of bubbles, drops, and particles. Kluwer, Dordrecht10.1007/978-94-015-9255-0 ↗