journal article·2000-07

Development of texture and texture gradient in Al-Cu-Li (2195) thick plate

K. E. Crosby, R. A. Mirshams, S. S. Pang

Journal of Materials Science· Volume 35· Issue 13
Publisher page

Abstract

Texture resulting from micromechanical processing plays an important role in the anisotropy of materials. The determination of texture components is a useful way to present texture data. The types of components present in the texture of a material can be related to other material aspects including predictions of yield loci using polycrystal methods. Al-Cu-Li 2195 thick plate was cold rolled to produce various reductions in thickness. Texture analysis was performed on the various rolled materials at different positions through the thickness of the plates. The texture components are consistent among the various rolled specimens at equivalent thickness positions. A texture gradient is observed to exist through the plate thickness that may indicate other microstructural information about the alloy. This texture gradient evidences the effects of increasing amounts of deformation on texture intensity, texture components observed, and changing modes of deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. V. Gerold, H.-J. Gudladt and J. Lendvai, Phys. Stat. Sol. A 131 (1992) 1509.10.1002/pssa.2211310224 ↗
2. E. W. Lee, in “Light Materials for Transportation Systems,” edited by N. J. Kim (Center for Advanced Aerospace Materials, 1993) p. 79.
3. K. Vasudevan, W. G. Fricke JR., M. A. Przystupa and S. Panchanadeeswaran, in Proceedings of the Eighth International Conference on Textures of Materials, 1988, edited by J. S. Kallend and G. Gottstein (The Metallurgical Society, Warrendale, PA, 1988) p. 1071.
4. U. F. Kocks and H. CHANDRA, Acta Metall. 30 (1982) 695.10.1016/0001-6160(82)90119-5 ↗
5. J. Mizera, J. H. Driver, E. Jezierska and K. J. Kurzydlowki, Mater. Sci. Eng. 212A (1996) 94.10.1016/0921-5093(96)10172-6 ↗
6. A. Fjeldly and H. J. Roven, Acta Mater. 44 (1996) 3497.10.1016/1359-6454(96)00015-8 ↗
7. H. J. Bunge, Int. Mater. Rev. 32 (1987) 265.10.1179/imr.1987.32.1.265 ↗
8. R. W. Cahn, in “Materials Science and Technology: A Comprehensive Treatment Vol. 15” (VCH-Verlaggesellschaft mbH, Weinheim, Germany, 1993), p. 429.
9. M. Hatherly and W. B. Hutchinson, in “Introduction to Textures in Metals” (The Institution of Metallurgists, London, 1979) p. 8.
10. J. S. Kallend, U. F. Kocks, A. D. Rollett and H. R. Wenk, Mater. Sci. Eng. 132A (1991) 1.10.1016/0921-5093(91)90355-Q ↗
11. H. Mecking, in “Preferred Orientation in Deformed Metals and Rocks: An Introduction to Modern Texture Analysis” (Academic Press, Inc., Orlando, 1985) p. 283.
12. A. D. Rollet and S. I. Wright, in “Texture and Anisotropy: Preferred Orientations in Polycrystals and their Effect on Materials Properties” (Cambridge University Press, 1998) p. 185.
13. F. Barlat and O. Richmond, Mater. Sci. Eng. 95 (1987) 15.10.1016/0025-5416(87)90494-0 ↗
14. H. J. Bunge, in “Mathematische Methoden der Textureanalyse” (Akademieverlag, Berlin, 1969).
15. H. R. Wenk and U. F. Kocks, Met. Trans. 18 (1987) 1083.10.1007/BF02668557 ↗
16. G. Sachs, Z. Verein Deut. Ing. 72 (1928) 134.
17. G. I. Taylor, J. Inst. Met. 62 (1938) 307.
18. Idem., in “Contributions to the Mechanics of Solids” (Macmillan, New York, 1938) p. 218.
19. J. F. W. Bishop and R. Hill, Phil. Mag. 42 (1951) 414.10.1080/14786445108561065 ↗
20. Idem., ibid. 42 (1951) 1298.10.1080/14786444108561385 ↗
21. J. Hirsch and K. L Ñcke, in “Preferred Orientation in Deformed Metals and Rocks: An Introduction to Modern Texture Analysis” (Academic Press, Inc., Orlando, 1985) p. 309.
22. B. Skrotzki, G. J. Shiflet and E. A. Starke, JR., in “SEAS Report No. UVA/538865/MSE95/101” (Dept. of Materials Science and Engineering, University of Virginia, Charlottesville, VA).
23. X.-H. Zeng and F. Barlat, Met. Trans. A 25 (1994) 2783.10.1007/BF02649229 ↗
24. H. Honneff and H. Mecking, in Proc. 5th Int. Conf. On Textures of Materials, edited by G. Gottstein and K. Lucke (Springer, Berlin, 1978) p. 265.10.1007/978-3-642-81313-9_24 ↗
25. H. Mecking, in “Preferred Orientation in Deformed Metals and Rocks: An Introduction to Modern Texture Analysis” (Academic Press, Inc, Orlando, 1985) p. 283.