Surface tension and density of RENE N5® and RENE 90® Ni-based superalloys
Source abstract
Abstract
The surface tension and density of Ni-based superalloys RENE N5(A (R)) and RENE 90(A (R)) have been measured by the pinned drop method at temperatures ranging from 1638 to 1780 K. In order to obtain accurate reliable data, the tests have been performed under a reducing atmosphere to minimize the oxygen contamination. In the temperature ranges investigated, both properties show a linear temperature dependence. With the aim of evaluating the reliability of the data, the present results have been analyzed using different thermodynamic models. The new experimental data for RENE N5(A (R)) and RENE 90(A (R)) superalloys were also compared with the corresponding data obtained by different experimental techniques.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Thermodynamic and Structural Properties of Metals and Alloys · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Rappaz M, Rettenmayr M (1998) Simulation of solidification. Curr Opin Solid State Mater Sci 3:275–28210.1016/S1359-0286(98)80103-4 ↗
2. Pollock TM, Tin S (2006) Nickel-based superalloys for advanced turbine engines: chemistry, microstructure, and properties. J Propuls Power 22(2):361–37410.2514/1.18239 ↗
3. Van Sluytman JS, Pollock TM (2012) Optimal precipitate shapes in nickel-base γ − γ′ alloys. Acta Mater 60:1771–178310.1016/j.actamat.2011.12.008 ↗
4. Reed RC, Tao T, Warnken N (2009) Alloys-by-design: application to nickel-based single crystal superalloys. Acta Mater 57:5898–591310.1016/j.actamat.2009.08.018 ↗
5. Warnken N, Mab D, Drevermann A, Reed RC, Fries SG, Steinbach I (2009) Phase-field modelling of as-cast microstructure evolution in nickel-based superalloys. Acta Mater 57:5862–587510.1016/j.actamat.2009.08.013 ↗
6. Mukai K, Li Z, Mills KC (2005) Prediction of the densities of liquid Ni-based superalloys. Metall Mater Trans 36B:255–26210.1007/s11663-005-0027-y ↗
7. Mills KC, Youssef YM, Li Z, Su Y (2006) Calculation of thermophysical properties of Ni-based superalloys. ISIJ Int 46(5):623–63210.2355/isijinternational.46.623 ↗
8. Brooks R, Egry I, Ricci E, Seetharaman S, Wunderlich R (2006) Thermophysical property measurements of high-temperature liquid metallic alloys–state of the art. High Temp Mater Process 25:303–32210.1515/HTMP.2006.25.5-6.303 ↗
9. Egry I, Ricci E, Novakovic R, Ozawa S (2010) Surface tension of liquid metals and alloys—recent developments. Adv Colloid Interface Sci 159:198–21210.1016/j.cis.2010.06.009 ↗
10. Keene BJ (1993) Review of data for the surface tension of pure metals. Int Mater Rev 38:157–19210.1179/imr.1993.38.4.157 ↗
11. Mills KC, Su YC (2006) Review of surface tension data for metallic elements and alloys: part 1—pure metals. Int Mater Rev 51:329–35110.1179/174328006X102510 ↗
12. Keene BJ (1993) The surface tension of tin and its alloys with particular reference to solders. National Physical Laboratory, Teddington
13. Nowak R, Lanata T, Sobczak N, Ricci E, Giuranno D, Novakovic R, Holland-Moritz D, Egry I (2010) Surface tension of γ-TiAl-based alloys. J Mater Sci 45:1993–2001. doi: 10.1007/s10853-009-4061-z10.1007/s10853-009-4061-z ↗
14. Sikka VK, Deevi SC, Viswanathan S, Swindeman RW, Santella ML (2000) Advances in processing of Ni3Al-based intermetallics and applications. Intermetallics 8:1329–133710.1016/S0966-9795(00)00078-9 ↗
15. Fecht HJ, Wunderlich R, Battezzati L, Egry I, Étay J, Ricci E, Seetharaman S (2008) Thermophysical properties of liquid metallic alloys. Final Report Phase II Thermolab ESA-MAP Project AO-99-022
16. Naidich JuV (1981) The wettability of solids by liquid metals. In: Cadenhead DA, Danielli JF (eds) Progress in surface and membrane science. Academic Press, New York, pp 353–484
17. Ricci E, Arato E, Passerone A, Costa P (2005) Oxygen tensioactivity on liquid-metal drops. Adv Colloid Interface Sci 117:15–3210.1016/j.cis.2005.05.007 ↗
18. Ricci E, Giuranno D, Novakovic R, Matsushita T, Seetharaman S, Brooks R, Chapman L, Quested P (2007) Density, surface tension, and viscosity of CMSX-4® superalloy. Int J Thermophys 28:1304–132110.1007/s10765-007-0257-0 ↗
19. Giuranno D, Tuissi A, Novakovic R, Ricci E (2010) Surface tension and density of Al-Ni Alloys. J Chem Eng Data 55:3024–302810.1021/je901055j ↗
20. Battezzati L, Baldissin D (2008) The ThermoLab Project: thermophysical properties of superalloys. High Temp Mater Process 27(6):423–42810.1515/HTMP.2008.27.6.423 ↗
21. Maze C, Burnet G (1971) Modifications of a non-linear regression technique used to calculate surface tension from sessile drops. Surf Sci 24:335–34210.1016/0039-6028(71)90240-8 ↗
22. Wu RI, Perepezko JH (2000) Liquidus temperature determination in multicomponent alloys by thermal analysis. Metall Mater Trans 31A:497–50110.1007/s11661-000-0285-x ↗
23. Campbell CE, Boettinger WJ, Hansen T, Merewether P, Mueller BA (2005) Examination of multicomponent diffusion between two Ni-base superalloys. In: Turchi PEA, Gonis A, Rajan K, Meike A (eds) Complex inorganic solids: structural, stability, and magnetic properties of alloys, Springer, New York, pp. 241–250
24. Barabash OM, Barabash RI, David SA, Ice GE (2006) Residual stresses, thermomechanical behavior and interfaces in the weld joint. Adv Eng Mater 8(3):202–20510.1002/adem.200500239 ↗
25. Li Z, Mills KC, McLean M, Mukai K (2005) Measurement of the density and surface tension of Ni-based superalloys in the liquid and mushy states. Metall Mater Trans 36B:247–25410.1007/s11663-005-0026-z ↗
26. Ansara I, Dupin N, Lukas HL, Sundman B (1997) Thermodynamic assessment of the Al-Ni system. J Alloys Compd 247:20–3010.1016/S0925-8388(96)02652-7 ↗
27. Dupin N, Ansara I, Sundman B (2001) Thermodynamic re-assessment of the ternary system Al-Cr-Ni. Calphad 25(2):279–29810.1016/S0364-5916(01)00049-9 ↗
28. Iida T, Guthrie RIL (1993) The physical properties of liquid metals, 1st edn. Clarendon Press, Oxford
29. Lang G, Laty P, Joud JC, Desré P (1977) Measurement of the surface tension of some fluid metals by different methods. Z Metallkd 68:113–116
30. Levin ES, Ayushina GD (1971) Russ J Phys Chem 45(6):792–795
31. Naidich YuV, Perevertailo VM, Nevodnik GM (1972) Surface properties of Ni–C and Co–C melts. Izv Russ Akad Nauk Ser Metal 2:22–30
32. Novakovic R (2011) Bulk and surface properties of liquid Al-Cr and Cr-Ni alloys. J Phys 23(1–8):235107
33. Novakovic R, Tanaka T (2006) Bulk and surface properties of Al-Co and Co-Ni liquid alloys. Phys B 371:223–23110.1016/j.physb.2005.10.111 ↗
34. Plevachuk Y, Sklyarchuk V, Gerbeth G, Eckert S, Novakovic R (2011) Surface tension and density of liquid Bi-Pb, Bi-Sn and Bi-Pb-Sn eutectic alloys. Surf Sci 605:1034–104210.1016/j.susc.2011.02.026 ↗
35. Mukai K, Li Z, Fang L (2004) Measurement of the densities of nickel-based ternary, quaternary and commercial alloys. Mater Trans 45(10):2987–299310.2320/matertrans.45.2987 ↗
36. Mills KC, Youssef YM, Li Z (2006) The effect of aluminium content on thermophysical properties of Ni-based superalloys. ISIJ Int 46(1):50–5710.2355/isijinternational.46.50 ↗