Degradation of an alkyd polymer coating characterized by AC impedance
Source abstract
Abstract
Alternating current (AC) impedance was used to evaluate the degradation of a high solids alkyd primer paint coating in a 3% NaCl solution, a 100% relative humidity (RH) environment after immersion in a 3% NaCl solution, and a 95% RH environment after immersion in a 3% NaCl solution. The results indicate AC impedance measures the amount of water absorbed into the coating through resistance results. A significant increase in capacitance may indicate a build up of corrosion products which causes blistering or debonding at the coating/metal interface, which may also be determined by diffusion tail analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Smart Materials for Construction · Concrete Corrosion and Durability · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. H. Xiao and F. Mansfeld, J. Electrochem. Soc. 141 (1994) 2332.10.1149/1.2055121 ↗
2. A. S. M. Rautenbach, P. C. Pistorius and J. E. Leitch, Poly. Mater. Sci. Eng. 74 (1996) 14.
3. A. Amirudin and D. Thierry, Prog. Org. Coat. 26 (1995) 1.10.1016/0300-9440(95)00581-1 ↗
4. F. Mansfeld, Corrosion 52 (1996) 417.10.5006/1.3292128 ↗
5. C. Compère, È. Frechette and E. Ghali, Corrosion Sci. 34 (1993) 1259.10.1016/0010-938X(93)90086-V ↗
6. C-T Chen and B. S. Skerry, Corrosion 47 (1991) 598.10.5006/1.3585298 ↗
7. N. Pebere, T. picaud, M. Duprat and F. Dabosi, Corrosion Sci. 29 (1989) 1073.10.1016/0010-938X(89)90045-0 ↗
8. R. D. Armstrong and D. Wright, Electrochimica Acta 38 (1993) 1799.10.1016/0013-4686(93)80301-F ↗
9. F. Defloian, L. Fedrizzi, A. Locaspi and P. L. Bonora, Electrochimica Acta 38 (1993) 1945.10.1016/0013-4686(93)80320-Y ↗
10. R. Hirayama and S. Haruyama, Corrosion 47 (1991) 952.10.5006/1.3585208 ↗
11. T. C. Simpson, P. J. Moran, H. Hampel, G. D. Davis, B. A. Shaw, C. O. Arah, T. L. Fritz and K. Zankel, Corrosion 46 (1990) 331.10.5006/1.3585111 ↗
12. J. Titz, G. H. Wagner, H. SpÄhn, M. Ebert, K. JÑttner and W. J. Lorenz, Corrosion 46 (1990) 221.10.5006/1.3585095 ↗
13. S. A. Mccluney, S. N. Popova, B. N. Popov, R. E. White and R. B. Griffin, J. Electrochem. Soc. 139 (1992) 1556.10.1149/1.2069454 ↗
14. J. N. Murray and H. P. Hack, Corrosion 47 (1991) 480.10.5006/1.3585282 ↗
15. R. C. Bacon, J. J. Smith and F. M. Rugg, Ind. Eng. Chem. 40 (1948) 161.10.1021/ie50457a041 ↗
16. F. Wormwell and D. M. Brasher, Industrie Chim. Belge. 19 (1954) 813.
17. D. M. Brasher and A. H. Kingsbury, J. Appl Chem. 4 (1954) 62.10.1002/jctb.5010040202 ↗
18. R. E. Touhsaent and H. Leidheiser, Corrosion 28 (1972) 435.10.5006/0010-9312-28.12.435 ↗
19. L. Beaunier, I. Epeiboin, J. C. Lestrade and H. Takenouti, Surf. Tech. 4 (1976) 237.10.1016/0376-4583(76)90036-4 ↗
20. M. Kendig and H. Leidheiser, J. Electrochem Soc. 123 (1976) 982.10.1149/1.2133017 ↗
21. H. Leidheiser and M. Kendig, Corrosion 32 (1976) 69.10.5006/0010-9312-32.2.69 ↗
22. F. Mansfeld, M. Kendig and S. Tsai, Corrosion 38 (1982) 478.10.5006/1.3577363 ↗
23. D. F. Wei, I. Chatterjee and D. A. JOnes, Corrosion 51 (1995) 97.10.5006/1.3293589 ↗
24. S. FeliuJr., R. Barajas, J. M. Bastidas, M. Morcillo and S. Feliu, “Electrochemical Impedance: Analysis and Interpretation,” edited by J. R. Scully et al., ASTM special technical publication #1188, (Philadelphia, PA, 1993) p. 438.
25. F. Mansfeld, M. Kendig and S. Tsai, Corrosion Sci. 23 (1983) 317.10.1016/0010-938X(83)90064-1 ↗
26. F. Mansfeld and M. Kendig, “Laboratory Corrosion Tests and Standards,” edited by G. S. Haynes and R. Baboian, ASTM special technical publication #866, (Philadelphia, PA, 1985) p. 122.
27. Z60 Inpedance/Gain-Phase Analysis Software Operating Manual, Scribner Assoc. ver 1.3 (1991).
28. E. K. Tan, F. Bellucci, M. J. Kloppers and R. M. Latanision, Mat. Sci. Forum 111-112 (1992) 177.10.4028/www.scientific.net/MSF.111-112.177 ↗
29. “Handbook of Chemistry and Physics,” edited by C. D. HODGMAN, R. C. WEAST and S. M. SHELBY, 41st ed. (Chemical Rubber Pub. Co., Cleveland, OH, 1959-60) p. 2525.