Wettability of electrode metals on barium titanate substrate
Source abstract
Abstract
The wettability and bonding strength between electrode metals and dielectrics are very important for internal electrodes, terminations, and soldering of multilayer ceramic passive components. In this work, the contact angles of electrode metals, including Pb, Sn, Au, Ag, Ag/Pd, and Cu on BaTiO3 were measured. Results showed that the addition of Pd into Ag significantly reduced the contact angle of Ag on BaTiO3 substrate. The wettability of noble metals (Ag and Au) is nearly independent of the partial pressure of oxygen, under the circumstances of the investigated oxygen partial pressure and within the accuracy of the contact angle measurement. However, molten Cu changes its contact angle drastically when using purified Ar (102°) instead of as-received Ar (89°), and in an air atmosphere (64°). The work of adhesion, according to Young-Dupre equation, was also calculated for these metals. Results were compared with those on ZrO2, SiO2 and Al2O3.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. R. E. Loehman, Amer. Ceram. Soc. Bull. 68 (1989) 891.
2. Z. Wang and P. Wynblatt, Mater. Sci. Eng. A259 (1999) 287.10.1016/S0921-5093(98)00900-9 ↗
3. J. T. Klomp, Mat. Res. Soc. Symp. Proc. 40 (1985) 381.10.1557/PROC-40-381 ↗
4. M. Ruble and A. G. Evan, Mater. Sci. Eng. A107 (1989) 187.
5. D. E. Packham, J. Adhesion and Adhesives 16 (1996) 121.10.1016/0143-7496(95)00034-8 ↗
6. W. D. Kingery, J. Amer. Ceram. Soc. 37 (1954) 43.10.1111/j.1151-2916.1954.tb14007.x ↗
7. A. R. Miedema, Z. Metallkde. 69 (1978) 287.
8. P. Nikolopolos, G. Ondracek and D. Sotiropoulou, Ceram. Int. 15 (1989) 201.10.1016/0272-8842(89)90039-4 ↗
9. M. Shimbo, M. Naka and I. Okamoto, J. Mater. Sci. 24 (1989) 663.
10. K. Nogi, K. Oishi and K. Ogino, Mater. Trans. JIM 30 (1989) 137.10.2320/matertrans1989.30.137 ↗
11. J. V. Naidich, V. S. Zhuravljov and N. I. Frumina, J. Mater. Sci. 25 (1990) 1895.10.1007/BF01045739 ↗
12. H. Fujii and H. Nakae, Acta Mater. 44 (1996) 3567.10.1016/1359-6454(96)00017-1 ↗
13. S. Sugihara and K. Okazaki, on Abstracts of the Fifth U.S.-Japan Seminar on Dielectric and Piezoelectric Ceramic,Kyoto, Japan, Dec. 11-14, 1990, pp. 130-133.
14. F. Bashforth and J. C. Adams, The Theories of Capillary Action, Cambridge,1883.
15. W. A. Weyl, “Structure and Properties of Solid Surfaces,” edited by R. Gomer and C. S. Smith (University of Chicago, Press, Chicago, 1953) p. 147.
16. M. Humenik and W. D. Kingery, J. Amer. Ceram. Soc. 37 (1954) 18.10.1111/j.1151-2916.1954.tb13972.x ↗
17. T. L. Rutt and J. A. Syne, IEEE Trans. Parts, Hybrids, Packaging PHP-9 (1973).10.1109/TPHP.1973.1136725 ↗
18. F. R. Anderson and H. C. Ling, Ceramic Transaction, Vol. 8, Ceramic Dielectrics, edited by M. Yan, 1991, p. 136.
19. D. Suvoroupv and J. Klobcar, Proc. of the Center for Dielectric Studies Symposium on Improvement of Multilayer Ceramic Reliability, May 1991, pp.143-162.
20. M. Wittmer, Mat. Res. Soc. Symp. Proc. 40 (1985) 393.10.1557/PROC-40-393 ↗
21. A. Meier, M. D. Blaldwin, P. R. Chiclambaram, and G. R. Edwards, Mater. Sci. Eng. A196 (1995) 111.10.1016/0921-5093(94)09685-6 ↗
22. Y. V. Naidich, Akad Nauk Ukr. SSR, Kiev, Naukova Dumka (1972) 635.
23. J. E. Mcdonald and J. G. Eberhart, Trans. Metall. Soc. AIME 233 (1965) 512.
24. S. F. Wang, J. P. Dougherty, W. Huebner and J. P. Pepin, J. Amer. Ceram. Soc. 77 (1994) 3051.10.1111/j.1151-2916.1994.tb04549.x ↗