journal article·2002-07

Strength and dynamic fatigue of silicon nitride at intermediate temperatures

A. A. Wereszczak, H.-T. Lin, T. P. Kirkland, M. J. Andrews, S. K. Lee

Journal of Materials Science· Volume 37· Issue 13
Publisher page

Abstract

The flexure strength distributions and dynamic fatigue of GS44, NT551, and NT154 silicon nitrides were determined at intermediate temperatures (≤850°C) in ambient air. GS44 and NT551 were fabricated by gas pressure sintering and had a larger volume fraction of secondary phase than the hot-isostatically pressed NT154. The inert characteristic strength for the GS44 and NT551 decreased with temperature while that for the NT154 was statistically independent of temperature. The slow crack growth exponent, N, for the GS44 and NT551 exhibited a 70–80% decrease between 700 and 850°C while the strength of NT154 was comparatively independent of stressing rate at 850°C. Associated with those changes in mechanical performances, the coefficient of thermal expansion (CTE) for the GS44 and NT551 sharply increased between 700 and 850°C while that for the NT154 did not. Although the observed change in CTE (and the temperature range where it occurred) did not have any obvious correlation with a change in inert strength at these intermediate temperatures, its presence was an indicator of a threshold temperature where dynamic fatigue resistance was compromised if the temperature exceeded it. The change in material state (and the associated temperature region for which it occurs) is linked to the equilibrium state of the secondary phase in the silicon nitride.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. D. W. RICHERSON, “Modern Ceramic Engineering” (Marcel Dekker, New York, NY, 1982).
2. R. KAMO and W. BRYZIK,Society of Automotive Engineers (SAE) SP-571 (1984) 21.
3. M. SCHREINER, W. LIANG, R. KAMO and R. WALSON, SAE Paper No. 870418, 1987.
4. M. ASNANI and F. KUONEN, SAE Paper No. 850358, 1988.
5. D. H. UPDIKE and P. D. NAGLE, SAE Paper No. 880441, 1988.
6. D. M. KABAT, I. J. GARWIN and D. L. HARTSOCK, SAE Paper No. 880670, 1988.
7. R. R. WILLS, Communications of the American Ceramic Society 72 (1988) 1261.10.1111/j.1151-2916.1989.tb09722.x ↗
8. Y. HORI, Y. MIYAKAWA, S. ASAMI and T. KAJIHARA, SAE Paper No. 890175, 1989.
9. G. RODGERS, R. SOUTHAM, J. REINICKE-MURMANN and P. KREUTER, SAE Paper No. 900452, 1990.
10. R. HAMMINGER and J. HEINRICH, J., in “Proceedings of the Materials Research Society Symposia” (1993) Vol. 287, p. 513.10.1557/PROC-287-513 ↗
11. H. IZUMIDA, T. NISHIOKA, A. YAMAKAWA and M. YAMAGIWA, SAE Paper No. 970003, 1997.
12. N. N. NEMETH, L. M. POWERS, L. A. JANOSIK and J. P. GYEKENYESI, 1993, Users and Programmers Manual, NASA TP-2916, National Aeronautics and Space Administration, Cleveland, OH, 1993.
13. AlliedSignal Engines (Phoenix, AZ), ORNL/Sub/89-SC674/1-2, DOE Office of Transportation Technologies, 1995.
14. A. A. WERESZCZAK, T. P. KIRKLAND, M. K. FERBER and M. J. ANDREWS, Ceramic Engineering and Science Proceedings 18 (1997) 475.10.1002/9780470294437.ch53 ↗
15. M. J. ANDREWS, A. A. WERESZCZAK and K. BREDER, ibid. 20 (1999) 555.10.1002/9780470294567.ch63 ↗
16. M. N. MENON, H. T. FANG, D. C. WU, M. G. JENKINS, M. K. FERBER, K. L. MORE, C. R. HUBBARD and T.A. NOLAN, J. Amer. Ceram. Soc. 77 (1994) 1217.10.1111/j.1151-2916.1994.tb05395.x ↗
17. ASTM C1161, in “Annual Book of ASTM Standards,” Vol. 15.01 (American Society for Testing and Materials, West Conshohocken,PA, 1999).
18. ASTM C1239, in “Annual Book of ASTM Standards,” Vol. 15.01 (American Society for Testing and Materials, West Conshohocken, PA, 1999).
19. ASTM C1368, in “Annual Book of ASTM Standards,” Vol. 15.01 (American Society for Testing and Materials, West Conshohocken, PA, 1999).
20. ASTM E228, in “Annual Book of ASTM Standards,” Vol. 14.02 (American Society for Testing and Materials, West Conshohocken, PA, 1999).
21. G. W. HOLLENBERG, G. R. TERWILLIGER and R. S. GORDON, J. Amer. Ceram. Soc. 54 (1971) 196.10.1111/j.1151-2916.1971.tb12263.x ↗
22. S. HAMPSHIRE, R. DREW and K. H. JACK, ibid. 67 (1984) C46.10.1111/j.1151-2916.1984.tb19752.x ↗
23. S. SAKKA, Annual Review of Materials Science 16 (1986) 29.10.1146/annurev.ms.16.080186.000333 ↗
24. E. Y. SUN, P. F. BECHER, S.-H. HWANG, S. B. WATERS, G. M. PHARR and T. Y. TSUI, Journal of Non-Crystalline Solids 208 (1996) 162.10.1016/S0022-3093(96)00510-8 ↗
25. A. A. WERESZCZAK, M. K. FERBER, T. P. KIRKLAND, K. L. MORE, M. R. FOLEY and R. L. YECKLEY, J. Amer. Ceram. Soc. 78 (1995) 2129.10.1111/j.1151-2916.1995.tb08625.x ↗
26. A. A. WERESZCZAK, K. BREDER and M. K. FERBER, ibid. 76 (1993) 2919.10.1111/j.1151-2916.1993.tb04039.x ↗
27. A. A. WERESZCZAK, T. P. KIRKLAND, K. BREDER, M. K. FERBER and P. KHANDELWAL, Materials Science and Engineering A 191 (1995) 257.10.1016/0921-5093(94)09640-6 ↗
28. A. WERESZCZAK, K. BREDER, M. J. ANDREWS, T. P. KIRKLAND and M. K. FERBER, ASME Paper No. 98-GT-527, presented at International GasTurbine and Aeroengine Congress and Exhibition, Stockholm, Sweden, June 2–5, 1998.
29. K. BREDER, A. A. WERESZCZAK and M. J. ANDREWS, Ceramic Engineering and Science Proceedings 19 (1998) 89.10.1002/9780470294499.ch10 ↗
30. A. A. WERESZCZAK, T. P. KIRKLAND, H.-T. LIN and S. K. LEE, ibid. 21 (2000) 497.10.1002/9780470294635.ch59 ↗
31. A. A. WERESZCZAK, T. P. KIRKLAND, H.-T. LIN, R. A. OTT, C. R. BRINKMAN, S. K. LEE, M. J. ANDREWS and J. THIELE, Heavy Vehicle Propulsion System Materials Program Semiannual Technical Progress Report, DOE Office of Transportation Technologies, Oct. 1999–Mar. 2000, pp. 82–90 in Oak Ridge National Laboratory Report No. ORNL/TM-2000/233, August 2000.
32. R. T. GOVILA, American Ceramic Society Bulletin 65 (1986) 1287.
33. F. F. LANGE, S. C. SINGHAL and R. C. KUZNICKI, J. Amer. Ceram. Soc.60 (1977) 249.10.1111/j.1151-2916.1977.tb14118.x ↗
34. K. E. AMIN, K. N. SIEBEIN and J. A. WADE, J. Mater. Sci. 24 (1989) 4253.10.1007/BF00544495 ↗