Misorientation dependence of discontinuous precipitation in Cu-Be alloy bicrystals
Source abstract
Abstract
The boundary-dependent discontinuous precipitation (DP) for various [001] symmetric tilt boundaries in Cu–5.2 at% Be alloy bicrystals has been examined in the temperature range 523–698 K. The precipitate phase maintains a constant interlamellar spacing under isothermal growth conditions. The interlamellar spacing increases with an increase in temperature. The incubation period τ to initiate DP and cell growth rate for DP against misorientation angle diagrams show local peaks and cusps at the same misorientation angles. The positions of the peaks and cusps agree with those of cusps in the boundary energy against misorientation diagram. The formation and growth of DP occur more easily at higher-energy boundaries. A detailed kinetic analysis of the experimental data using the models by Turnbull and Petermann–Hornbogen has enabled the determination of the grain-boundary diffusivity of Be along each boundary in the temperature range studied. A close correlation is found between the diffusivity and the energy of boundaries. A higher-energy boundary has a higher diffusivity with a smaller activation energy and a smaller pre-exponential factor.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. M. Frebel and J. Schenk, Z. Metallk. 70 (1979) 230.
2. M. Miki, T. Yamasaki, N. Ueyama and Y. Ogino, J. Japan Inst. Metals 53 (1989) 388.10.2320/jinstmet1952.53.4_388 ↗
3. T. Shibayanagi, Y. Kitazume and S. Hori, ibid. 54 (1990) 131.10.2320/jinstmet1952.54.2_131 ↗
4. I. Kaur, Y. Mishin and W. Gust, “Fundamentals of grain and interphase boundary diffusion,” 3rd ed. (John Wiley & Sons, Chichester, 1995) p. 303.
5. I. Manna, W. Gust and B. Predel, Scripta Metall. Mater. 24 (1990) 1635.10.1016/0956-716X(90)90519-M ↗
6. I. Manna, J. N. Jha and S. K. Pabi, J. Mater. Sci. 30 (1995) 1449.10.1007/BF00375247 ↗
7. H. Tsubakino and R. Nozato, J. Japan Inst. Metals 43 (1979) 42.10.2320/jinstmet1952.43.1_42 ↗
8. H. Tsubakino, R. Nozato and A. Yamamoto, Mater. Sci. Tech. 9 (1993) 288.10.1179/mst.1993.9.4.288 ↗
9. T. Mori, T. Ishii, M. Kajihara and M. Kato, Phil. Mag. Lett. 75 (1997) 367.10.1080/095008397179435 ↗
10. K. N. Tu and D. Turnbull, Acta Metall. 15 (1967) 369.10.1016/0001-6160(67)90214-3 ↗
11. D. B. Williams and E. P. Butler, Inter. Metals Rev. 26 (1981) 153.
12. P. N. T. Unwin and R. B. Nicholson, Acta Metall. 17 (1969) 1379.10.1016/0001-6160(69)90155-2 ↗
13. E. P. Butler and P. R. Swann, ibid. 24 (1976) 343.10.1016/0001-6160(76)90009-2 ↗
14. P. Czurratis, R. Kroggel and H. LÖffer, Z. Metallk. 79 (1988) 307.
15. R. Monzen, K. Kitagawa, M. Kato and T. Mori, J. Japan Inst. Metals 54 (1990) 1308.10.2320/jinstmet1952.54.12_1308 ↗
16. J. W. Rutter and K. T. Aust, Acta Metall. 13 (1965) 181.10.1016/0001-6160(65)90194-X ↗
17. E. M. Fridman, C. V. Kopezky and L. S. Shvindlerman, Z. Metallk. 66 (1975) 533.
18. D. Turnbull, Acta Metall. 3 (1955) 55.10.1016/0001-6160(55)90012-2 ↗
19. J. Petermann and E. Hornbogen, Z. Metallk. 59 (1968) 814.
20. T. B. Massalski (Editor-in chief), “Binary Alloy Phase Diagrams” (ASM International, Materials Park, Ohio, 1992) p. 645.
21. H. Tanimura and G. Wassermann, Z. Metallk. 25 (1933) 179.
22. M. C. Inman and H. R. Tipler, Met. Rev. 8 (1963) 105.
23. R. L. Fogel'on, YA. A. Ugay, A. V. Pokoyev, I. A. Akimova and V. D. Kretinin, Phys. Metall. Metallogr. 35 (1973) 176.
24. A. N. Aleshin, B. S. Bokshtein and L. S. Shvindlerman, Sov. Phy. Sol. State 19 (1977) 2051.
25. S. Yukawa and M. J. Sinnott, Trans. Amer. Inst. Mining Eng. 215 (1959) 338.
26. M. Biscondi, in “Physical Chemistry of the Solid States: Applications to Metals and their Compounds,” edited by P. Lacombe (Elsevier, Amsterdam, 1984) p. 225.
27. W. R. Upthegrove and M. J. Sinnott, Trans. Amer. Soc. Metals 50 (1958) 1031.
28. Q. Ma and R. W. Balluffi, Acta Metall. Mater. 41 (1993) 133.10.1016/0956-7151(93)90345-S ↗
29. R. W. Balluffi, Metall. Trans. A 13 (1982) 2069.10.1007/BF02648378 ↗
30. P. G. Shewmon, “Diffusion in Solids” (McGraw-Hill, New York, 1963) p. 44.