Analysis of the essential work of fracture method as applied to UHMWPE
Source abstract
Abstract
The validity of the basic assumptions behind the method of essential work of fracture (EWF), as applied to ultra-high molecular weight polyethylene (UHMWPE), is evaluated using finite element modelling. To define a suitable model of constitutive behaviour, the mechanical properties of UHMWPE have been measured in both uniaxial tension and compression over a range of strain rates. The observed strain rate dependence of stress, including the observed differences in strain rate sensitivity between tension and compression, is interpreted in terms of a single Eyring process. The constitutive theory is constructed comprising an Eyring process and hyperelastic networks, the latter having responses symmetric with respect to tension and compression. This theory is implemented within a finite element scheme, and used to model fracture measurements made on the same material using double-edge notch tensile specimens. Calculations of the non-essential work and of the extent of the plastic zones are thus made possible. It is concluded that the specific non-essential work is essentially constant, but that the shape factor β, assumed constant in the conventional analysis, varies significantly with ligament length. The implication of this finding on the derived EWF value is evaluated and found to be slight.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Orthopaedic implants and arthroplasty · Elasticity and Material Modeling · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. Bergström JS, Kurtz SM, Rimnac CM, Edidin AA (2002) Biomaterials 23:232910.1016/S0142-9612(01)00367-2 ↗
2. Bergström JS, Rimnac CM, Kurtz SM (2003) Biomaterials 24:136510.1016/S0142-9612(02)00514-8 ↗
3. Bergström JS, Rimnac CM, Kurtz SM (2004) Biomaterials 25:217110.1016/j.biomaterials.2003.08.065 ↗
4. Kurtz SM, Muratoglu OK, Evans M, Edidin AA (1999) Biomaterials 20:165910.1016/S0142-9612(99)00053-8 ↗
5. Ching ECY, Poon WKY, Li RKY, Mai Y-W (2000) Polym Eng Sci 40:255810.1002/pen.11386 ↗
6. Yamakawa RS, Razzino CA, Correa CA, Hage E Jr (2004) Polym Test 23:19510.1016/S0142-9418(03)00080-1 ↗
7. Hashemi S (2003) Polym Test 22:58910.1016/S0142-9418(02)00162-9 ↗
8. Poon WKY, Ching ECY, Cheng CY, Li RKY (2001) Polym Test 20:39510.1016/S0142-9418(00)00049-0 ↗
9. Karger-Krocsis J, Moskala EJ (2000) Polymer 41:630110.1016/S0032-3861(99)00866-6 ↗
10. Mai YW, Cotterell B (1986) Int J Fracture 30:R3710.1007/BF00034026 ↗
11. Broberg KB (1968) Int J Fracture 4:1110.1007/BF00189139 ↗
12. Mai YW, Cotterell B, Horlyck, Vigna G (1987) Polym Eng Sci 27:80410.1002/pen.760271106 ↗
13. Hart EW (1967) Acta Metall 15:35110.1016/0001-6160(67)90211-8 ↗
14. Coates PD, Ward IM (1980) J Mater Sci 15:2897. doi: https://doi.org/10.1007/BF0055056110.1007/BF00550561 ↗
15. Sweeney J, Shirataki H, Unwin AP, Ward IM (1999) J Appl Polym Sci 74:333110.1002/(SICI)1097-4628(19991227)74:14<3331::AID-APP6>3.0.CO;2-0 ↗
16. Ward IM, Sweeney J (2004) An introduction to the mechanical properties of solid polymers. Wiley, Chichester
17. Chow TS (1992) J Rheol 38:170710.1122/1.550281 ↗
18. Haward RN, Thackray G (1968) Proc Roy Soc A 302:453
19. Nazarenko S, Bensason S, Hiltner A, Baer E (1994) Polymer 35:388310.1016/0032-3861(94)90271-2 ↗
20. Bauwens-Crowet C, Bauwens J-C, Homès G (1972) J Mater Sci 7:176. doi: https://doi.org/10.1007/BF0240350410.1007/BF02403504 ↗
21. Joseph SH, Duckett RA (1978) Polymer 19:83710.1016/0032-3861(78)90014-9 ↗
22. Truss RW, Duckett RA, Ward IM (1981) J Mater Sci 16:1689. doi: https://doi.org/10.1007/BF0239688910.1007/BF02396889 ↗
23. Brooks NWJ, Duckett RA, Ward IM (1995) J Rheol 39:42510.1122/1.550705 ↗
24. Gueguen O, Richeton J, Ahzi S, Makradi A (2008) Acta Mater 56:165010.1016/j.actamat.2007.12.015 ↗
25. Levita G, Parisi L, Mcloughlin S (1996) J Mater Sci 31:1545. doi: https://doi.org/10.1007/BF0035786310.1007/BF00357863 ↗
26. Rimnac CM, Wright TM, Klein RW (1988) Polym Eng Sci 28:158610.1002/pen.760282403 ↗
27. Pruitt LA (2005) Biomaterials 26:90510.1016/j.biomaterials.2004.03.022 ↗
28. Haughie DW, Buckley CP, Wu J (2006) Biomaterials 27:387510.1016/j.biomaterials.2006.03.010 ↗
29. Spencer PE, Sweeney J, Coates PD (2008) Mech Time-Dependent Mater 12:31310.1007/s11043-008-9064-7 ↗
30. Sweeney J, Spares R, Woodhead M (2009) Polym Eng Sci 49:190210.1002/pen.21426 ↗
31. Figiel L, Buckley CP (2009) J Non-Linear Mech 44:38910.1016/j.ijnonlinmec.2009.01.005 ↗