Surface reactivity and electrophoretic deposition of ZrO2–MgO mechanical mixture
Source abstract
Abstract
Electrophoretic deposition (EPD) is a precision technique useful for obtaining high quality ceramic bodies with controlled dimensions and smooth coatings. The electrophoretic deposition rate is highly dependent on the surface chemistry of the powders, especially when dealing with multi-component systems. The objective of this work is to study the surface reactivity of both ZrO2 and MgO in ethanol suspension to provide experimental benchmarks to control EPD of a ZrO2–3 wt% MgO mechanical mixture (Z3M) in ethanol. Infrared spectroscopy (FTIR) showed that ZrO2 surface spontaneously reacts with ethanol, generating negative electrophoretic mobility of the particles (−0.07 × 10−8 V−1 s−1) measured by Electroacoustic Sonic Amplitude (ESA). MgO surface also spontaneously reacted with ethanol, but a positive electrophoretic mobility was observed in this case (0.26 × 10−8 V−1 s−1). Scanning Electron Microscopy of Z3M dried from ethanol suspension showed that MgO particles were located around the ZrO2 particles, forming composite agglomerates, probably due to the electrostatic attraction between MgO and ZrO2 particles. Homogeneous deposits could be obtained from EPD of Z3M ethanol suspensions. Mercury intrusion porosimetry showed that the ZrO2–MgO green deposited bodies using different voltages had similar pores diameters distributions, indicating that the ZrO2–MgO agglomerates are not affected by the increasing deposition rates.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrophoretic Deposition in Materials Science · TiO2 Photocatalysis and Solar Cells · Advanced Photocatalysis Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Richerson DW (1992) Modern ceramic engineering: properties, processing, and use in design
2. Chiang Y-M, Birnie D, Kingery WD (1997) Physical ceramics – principles for ceramic science and engineering. John Wiley & Sibs Inc., New York
3. Persson M (1994) In: Pugh RJ, Bergstrom L (eds) Surface and colloid chemistry in advanced ceramic processing. Marcell Decker, New York
4. Hirata Y, Numaguchi N, Shih WH (1999) In: Novel synthesis and processing of ceramics. p 127
5. Sarkar P, Nicholson PS (1996) J Am Ceram Soc 79:198710.1111/j.1151-2916.1996.tb08929.x ↗
6. Sarkar P, De D, Rho H (2004) J Mater Sci 39:81910.1023/B:JMSC.0000012909.46419.0e ↗
7. Tabellion J, Clasen R (2004) J Mater Sci 39:80310.1023/B:JMSC.0000012907.52051.fb ↗
8. Negishi H, Yamaji K, Sakai N, Horita T, Yanagishita H, Yokokawa H (2004) J Mater Sci 39:83310.1023/B:JMSC.0000012911.86185.13 ↗
9. Readey MJ, Lee RR, Halloran JW, Heuer AH (1990) J Am Ceram Soc 73:149910.1111/j.1151-2916.1990.tb09786.x ↗
10. Hadraba H, Maca K, Cihlar J (2004) Ceram Int 30:853
11. Zhitomirsky I, Petric A (2000) J Eur Ceram Soc 20:205510.1016/S0955-2219(00)00098-4 ↗
12. Put S, Vleugels J, Van Der Biest O (2003) J Mater Proce Technol 143:57210.1016/S0924-0136(03)00370-4 ↗
13. Muccillo R, Muccillo ENS, Saito NH (1998) Mater Lett 34:12810.1016/S0167-577X(97)00152-3 ↗
14. Ferrari B, Moreno R, Sarkar P, Nicholson PS (2000) J Eur Ceram Soc 20:9910.1016/S0955-2219(99)00152-1 ↗
15. Vanderhoeven PHC, Lyklema J (1992) Adv Colloid Interface Sci 42:20510.1016/0001-8686(92)80024-R ↗
16. Bruinsma PJ, Smith PA, Bunker BC (1997) J Phys Chem B 101:841010.1021/jp970892y ↗
17. Kaliszewski MS, Heuer AH (1990) J Am Ceram Soc 73:150410.1111/j.1151-2916.1990.tb09787.x ↗
18. Di Valentin C, Del Vitto A, Pacchioni G, Abbet S, Worz AS, Judai K, Heiz U (2002) J Phys Chem B 106:1196110.1021/jp026399q ↗
19. Fouad NE, Thomasson P, Knozinger H (2000) Appl Catal A-Gen 196:12510.1016/S0926-860X(99)00461-5 ↗