Predicting porosity content in triaxial porcelain bodies as a function of raw materials contents
Source abstract
Abstract
This work describes the relationships observed between the porosity of fired ceramic test pieces and the raw materials contents in the unfired mixture. The investigation was carried out using the mixture experiments design approach coupled with response surface methodology, which enables the calculation of statistically significant models for the properties from a limited number of experimental results. Ten formulations of a clay mixture, potash feldspar and quartz sand were processed in the laboratory under fixed conditions, similar to those used on wall and floor tile industrial practice, and characterized. Closed porosity (CP) was estimated from the analysis of back-scattered SEM photomicrographs, open porosity (OP) was calculated as the product of bulk density and water absorption, and total porosity (TP) was calculated from OP and CP values. Characterization results were used to calculate statistically significant and valid regression equations, relating those properties with the raw material contents in the unfired mixture. For the particular raw materials and processing conditions used, the models clearly show how quartz contributes to increasing OP and the crucial role played by feldspar when CP and TP are to be minimized (circa 3 vol.%), and how the clay content can counteract that effect and lead to maximum closed porosity (∼14 vol.%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycling and utilization of industrial and municipal waste in materials production · Building materials and conservation · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Myers RH, Montgomery DC (2002) Response surface methodology: process and product optimization using designed experiments. John Wiley & Sons, New York
2. Cornell JA (2002) Experiments with mixtures: designs, models and the analysis of mixture data, 3rd edn. John Wiley & Sons10.1002/9781118204221 ↗
3. Reed JS (1998) Introduction to the principles of ceramics processing, 2nd edn. John Wiley & Sons, p 395
4. Amoros Albaro JL, Blasco Fuentes A, Enrique Navarro JE, Negre Medall F, Manfredini T, Pozzi P (1990) Ind Ceram 10:73
5. Correia SL, Curto KAS, Hotza D, Segadães AM (2004) J Eur Ceram Soc 24:281310.1016/j.jeurceramsoc.2003.09.009 ↗
6. Correia SL, Hotza D, Segadães AM (2005) CFI—Ceram Forum Int 82:E39
7. Correia SL, Novaes APN, Hotza D, Segadães AM (2006) J Am Ceram Soc 89:335610.1111/j.1551-2916.2006.01245.x ↗
8. Carty WM, Senapati U (1998) J Am Ceram Soc 81:310.1111/j.1151-2916.1998.tb02290.x ↗
9. Appoloni CR, Fernandes CP, Innocentin MDM, Macedo A (2004) Mater Res 7:55710.1590/S1516-14392004000400008 ↗
10. Manfredini T, Pellacani GC, Romagnoli M (1995) Am Ceram Soc Bull 74:76
11. Ece OI, Nakagawa ZE (2002) Ceram Int 28:13110.1016/S0272-8842(01)00068-2 ↗
12. Stathis G, Ekonomakou A, Stournaras CJ, Ftikos C (2004) J Eur Ceram Soc 24:235710.1016/j.jeurceramsoc.2003.07.003 ↗
13. Khalfaoui A, Kacim S, Hajjaji M (2006) J Eur Ceram Soc 26:16110.1016/j.jeurceramsoc.2004.10.030 ↗
14. Maiti KN, Kumar S (1992) Ceram Int 18:40310.1016/0272-8842(92)90073-M ↗
15. Tucci A, Esposito L, Rastelli E, Palmonari C, Rambaldi E (2004) J Eur Ceram Soc 24:8310.1016/S0955-2219(03)00121-3 ↗