journal article·2014-01

Characterization of the mechanical dissipation in shape-memory alloys during stress-induced phase transformation

C. Bubulinca, X. Balandraud, M. Grédiac, S. Stanciu, M. Abrudeanu

Journal of Materials Science· Volume 49· Issue 2
Publisher page

Abstract

The high reversibility of the martensitic transformation occurring in shape-memory alloys (SMAs) is at the origin of the mechanical performance of these materials. Infrared thermography is employed in this study to measure the mechanical dissipation produced by Cu–Zn–Al SMA specimens during stress-induced phase transformation. In practice, temperature change is first measured on the surface of a specimen subjected to cyclic mechanical loading at constant ambient temperature. The heat produced by the material can then be deduced from the temperature change by using the heat diffusion equation. The heat associated to mechanical irreversibility is expected to be very low compared to the other heat quantities produced by the material (such as the latent heat due to phase change and the heat due to thermoelastic coupling), so measuring this quantity requires special attention, as emphasized in this paper. The procedure which enables us to extract the mechanical dissipation from the measured heat source is first presented. The technique is then applied to two types of specimens: martensitic and austenitic. Different values of mechanical dissipation were measured, thus revealing different levels of mechanical irreversibility.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Thermography and Photoacoustic Techniques · Topology Optimization in Engineering

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Van Humbeeck V (2003) J Alloys Compd 355(1–2):5810.1016/S0925-8388(03)00268-8 ↗
2. Hornbogen E (2004) J Mater Sci 39(2):385. doi: 10.1023/B:JMSC.0000011492.88523.d310.1023/B:JMSC.0000011492.88523.d3 ↗
3. Cui J, Chu YS, Famodu OO, Furuya Y, Hattrick-Simpers J, James RD, Ludwig A, Thienhaus S, Wuttig M, Zhang ZY, Takeuch I (2006) Nat Mater 5(4):28610.1038/nmat1593 ↗
4. Chang SH (2011) Mater Chem Phys 125(3):35810.1016/j.matchemphys.2010.09.077 ↗
5. Chrysochoos A (2012) QIRT J 9(2):19310.1080/17686733.2012.746069 ↗
6. Oussouaddi O, Daridon L, Ahzi S, Chrysochoos A (2011) J Eng Mater Technol Trans ASME 133(2): article number 02100210.1115/1.4001592 ↗
7. Giancane S, Chrysochoos A, Dattoma V, Wattrisse B (2009) Theor Appl Fract Mech 52(2):11710.1016/j.tafmec.2009.08.004 ↗
8. Balandraud X, Zhou G, Grédiac M, Tessier-Doyen N (2010) Exp Mech 50(7):97910.1007/s11340-009-9306-x ↗
9. Muracciole JM, Wattrisse B, Chrysochoos A (2009) Strain 44(6):46810.1111/j.1475-1305.2007.00412.x ↗
10. Samaca Martinez JR, Le Cam JB, Balandraud X, Toussaint E, Caillard J (2013) Polymer 54(11):272710.1016/j.polymer.2013.03.012 ↗
11. Schlosser P, Louche H, Favier D, Orgéas L (2007) Strain 43(3):26010.1111/j.1475-1305.2007.00350.x ↗
12. Delpueyo D, Balandraud X, Grédiac M (2011) Mater Sci Eng A 528(28):824910.1016/j.msea.2011.07.050 ↗
13. Vives E, Burrows S, Edwards RS, Dixon S, Manosa L, Planes A, Romero R (2011) Appl Phys Lett 98(1): article number 01190210.1063/1.3533403 ↗
14. Yin H, Sun Q (2012) J Mater Eng Perform 21(12):250510.1007/s11665-012-0395-9 ↗
15. Louche H, Schlosser P, Favier D, Orgeas L (2012) Exp Mech 52(9):131310.1007/s11340-012-9607-3 ↗
16. Delpueyo D, Grédiac M, Balandraud X, Badulescu C (2012) Mech Mater 45:3410.1016/j.mechmat.2011.09.007 ↗
17. Kajiwara S, Kikuchi T (1982) Acta Metall 30(2):58910.1016/0001-6160(82)90240-1 ↗
18. Luong MP (1995) Nuclear Eng Des 158(2–3):36310.1016/0029-5493(95)01043-H ↗
19. Luong MP (1998) Mech Mater 28(1–4):15510.1016/S0167-6636(97)00047-1 ↗
20. La Rosa G, Risitano A (2000) Int J Fatigue 22(1):6510.1016/S0142-1123(99)00088-2 ↗
21. Dunand-Chatellet C, Moumni Z (2012) Int J Fatigue 36(1):16310.1016/j.ijfatigue.2011.07.014 ↗
22. Fukuda T, Saburi T, Doi K, Nenno S (1992) Mater Trans JIM 33(3):27110.2320/matertrans1989.33.271 ↗
23. Hodgson DE, Wu MH, Biermann RJ (1990) In: ASM Handbook Committee (eds) ASM handbook, vol 2. ASM International, Ohio, p 897
24. Tadaki T (1998) Cu-based shape memory alloys. In: Otsuka K, Wayman CM (eds) Shape memory materials. Cambridge University Press, Cambridge, pp 97
25. Balandraud X, Ernst E, Soos E (2000) Z Angew Math Phys 51(3):41910.1007/s000330050006 ↗
26. Peyroux R, Chrysochoos A, Licht C, Lobel M (1998) Int J Eng Sci 36(4):48910.1016/S0020-7225(97)00052-9 ↗
27. Maquin F, Pierron F (2009) Mech Mater 41(8):92810.1016/j.mechmat.2009.03.003 ↗
28. Chrysochoos A (1995) In: Berthaud Y (eds) Photomécanique 95. Eyrolles, Paris, France, pp 203
29. Chrysochoos A, Pham H, Maisonneuve O (1996) Nuclear Eng Des 162(1):110.1016/0029-5493(95)01140-4 ↗
30. Balandraud X, Ernst E, Soos E (1999) C R Acad Sci Ser IIB Mech Phys Astron 327(1):33
31. Boulanger T, Chrysochoos A, Mabru C, Galtier A (2004) Int J Fatigue 26(3):22110.1016/S0142-1123(03)00171-3 ↗
32. Berthel B, Chrysochoos A, Wattrisse B, Galtier A (2008) Exp Mech 48(1):7910.1007/s11340-007-9092-2 ↗
33. Samaca Martinez JR, Le Cam JB, Balandraud X, Toussaint E, Caillard J (2013) Polym Test 32(5):83510.1016/j.polymertesting.2013.04.003 ↗
34. Dulieu-Barton JM, Stanley P (1998) J Strain Anal Eng Des 33(2):9310.1243/0309324981512841 ↗
35. Balandraud X, Delpueyo D, Grédiac M, Zanzotto G (2010) Acta Mater 58(14):455910.1016/j.actamat.2010.03.032 ↗