journal article·2008-07

High energy impact techniques application for surface grain refinement in AZ91D magnesium alloy

Li-feng Hou, Ying-hui Wei, Bao-sheng Liu, Bing-she Xu

Journal of Materials Science· Volume 43· Issue 13
Publisher page

Abstract

A nanostructured surface layer was fabricated on magnesium alloy AZ91D by using the high-energy impact technique (HEIT). With the help of transmission electron microscope (TEM) and high-resolution transmission electron microscope (HRTEM), the microstructure features of the surface layer were systematically observed and characterized in different stages of microstructure evolution. The result revealed the mechanism of grain refinement and strain accommodation. The process of grain refinement, accompanied by an increase in strain in the surface layer, resulted from several processes. The onset of $$ \{ 01\ifmmode\expandafter\bar\else\expandafter\=\fi{1}2\} $$ deformation twinning and the intersection with $$ \{ 10\ifmmode\expandafter\bar\else\expandafter\=\fi{1}1\} $$ twins system are one of them. The operation of $$ {\left\langle {11\ifmmode\expandafter\bar\else\expandafter\=\fi{2}0} \right\rangle }{\left( {0001} \right)} $$ basal slip and $$ {\left\langle {11\ifmmode\expandafter\bar\else\expandafter\=\fi{2}3} \right\rangle }(1\ifmmode\expandafter\bar\else\expandafter\=\fi{1}02)/(0\ifmmode\expandafter\bar\else\expandafter\=\fi{1}1\ifmmode\expandafter\bar\else\expandafter\=\fi{2}) $$ pyramidal slip led to the formation of dislocation cells and low-angle dislocation boundaries. The successive subdivision of grains to a finer scale resulted in the formation of highly disoriented nanocrystalline grains. The mechanism of grain refinement was interpreted in terms of the structural subdivision of grains together with dynamic recrystallization. The minimum size of such refined grains was about 40 nm.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Surface Treatment and Residual Stress · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Korznikov AV, Ivanisenko YV, Laptionok DV, Safarov IM, Pilyugin VP, Valiev RZ (1994) Nanostruct Mater 4:159. doi: https://doi.org/10.1016/0965-9773(94)90075-210.1016/0965-9773(94)90075-2 ↗
2. Tao NR, Sui ML, Lu J, Lu K (1999) Nanostruct Mater 11:433. doi: https://doi.org/10.1016/S0965-9773(99)00324-410.1016/S0965-9773(99)00324-4 ↗
3. Shin DH, Kim BC, Kim YS, Park KT (2000) Acta Mater 48:2247. doi: https://doi.org/10.1016/S1359-6454(00)00028-810.1016/S1359-6454(00)00028-8 ↗
4. Yamashita A, Horita Z, Langdon TG (2001) Mater Sci Eng A 300:142. doi: https://doi.org/10.1016/S0921-5093(00)01660-910.1016/S0921-5093(00)01660-9 ↗
5. Rivas JM, Quinones SA, Murr LE (1995) Scripta Metall Mater 33:101. doi: https://doi.org/10.1016/0956-716X(95)00105-510.1016/0956-716X(95)00105-5 ↗
6. Murr LE, Niou C-S, Garcia EP, E.Ferreyra ET, Rivas JM, Sanchez JC (1997) Mater Sci Eng A 222:118. doi: https://doi.org/10.1016/S0921-5093(96)10518-910.1016/S0921-5093(96)10518-9 ↗
7. Murr LE, Quinones SA, Ferreyra E, Ayala A, Valerio OL, Hörz F, Benhard RP (1998) Mater Sci Eng A 256:166. doi: https://doi.org/10.1016/S0921-5093(98)00796-510.1016/S0921-5093(98)00796-5 ↗
8. Francesconi A, Pavarin D, Giacomuzzo C, Angrilli F (2006) Int J Impact Eng 33:264. doi: https://doi.org/10.1016/j.ijimpeng.2006.09.05610.1016/j.ijimpeng.2006.09.056 ↗
9. Murr LE, Shih HK, Niou C-S (1994) Mater Charact 33:65. doi: https://doi.org/10.1016/1044-5803(94)90060-410.1016/1044-5803(94)90060-4 ↗
10. Tao NR, Wang ZB, Tong WP, Sui ML, Lu J, Lu K (2002) Acta Mater 50:4603. doi: https://doi.org/10.1016/S1359-6454(02)00310-510.1016/S1359-6454(02)00310-5 ↗
11. Liu G, Wang SC, Lou XF, Lu J, Lu K (2001) Scripta Mater 44:179110.1016/S1359-6462(01)00738-2 ↗
12. Liu G, Lu J, Lu K (2000) Mater Sci Eng A 286:91. doi: https://doi.org/10.1016/S0921-5093(00)00686-910.1016/S0921-5093(00)00686-9 ↗
13. Zhang HW, Liu G, Hei ZK, Luu J, Lu K (2003) Acta Metall Sin 39:342
14. Zhu KY, Vassel A, Brisset F, Lu K, Lu J (2004) Acta Mater 52:4101. doi: https://doi.org/10.1016/j.actamat.2004.05.02310.1016/j.actamat.2004.05.023 ↗
15. Lanqing H, Ke W, Gang L, Bingshe X (2005) Trans Nonferrous Met Soc Chin 15:615
16. Wu X, Tao N, Hong Y, Xu B, Lu J, Lu K (2002) Acta Mater 50:2075. doi: https://doi.org/10.1016/S1359-6454(02)00051-410.1016/S1359-6454(02)00051-4 ↗
17. Wu X, Tao NR, Hong Y, Liu G, Xu B, Lu J, Lu K (2005) Acta Mater 53:681. doi: https://doi.org/10.1016/j.actamat.2004.10.02110.1016/j.actamat.2004.10.021 ↗
18. Caiyun S, Jijie X, Xiaolei W, Youshi H, Gang L, Jian L, Lu K (2004) Trans Mater Heat Treat 25:1242
19. Koike J, Ohyama R (2005) Acta Mater 53:196310.1016/j.actamat.2005.01.008 ↗
20. Yoshida Y, Cisar L, Kamado S et al (2003) Mater Sci Eng A 419–422:533
21. Kim WJ, Hong SI, Kim YS, Min SH, Jeong HT, Lee JD (2003) Acta Mater 51:3293. doi: https://doi.org/10.1016/S1359-6454(03)00161-710.1016/S1359-6454(03)00161-7 ↗
22. Kim WJ, Kim JK, Chao WY, Hong SI, Lee JD (2000) Acta Mater 48:2625. doi: https://doi.org/10.1016/S1359-6454(00)00061-610.1016/S1359-6454(00)00061-6 ↗
23. Yoshida Y, Cisar L, Kamado S (2003) Mater Trans 44:468. doi: https://doi.org/10.2320/matertrans.44.46810.2320/matertrans.44.468 ↗
24. Watanabe H, Mukai T, Kamado S, Kojima Y, Higashi K (2003) Mater Trans 44:463. doi: https://doi.org/10.2320/matertrans.44.46310.2320/matertrans.44.463 ↗
25. Matsubara K, Miyahara Y, Horita Z, Langdon TG (2003) Acta Mater 51:3037. doi: https://doi.org/10.1016/S1359-6454(03)00118-610.1016/S1359-6454(03)00118-6 ↗
26. Zhenhua C, Chunhua Y, Changqing H, Weijun X, Hongge Y (2006) Mater Rev 20:107
27. Von Mises R (1928) Angew Z Math Mech 8:16110.1002/zamm.19280080302 ↗
28. Bohlen J, Chmelík F, Dobroň P, Letzig D, Lukáč P, Kainer KU (2004) J Alloys Compd 378:214. doi: https://doi.org/10.1016/j.jallcom.2003.10.10110.1016/j.jallcom.2003.10.101 ↗
29. Staroselsky A, Anand L (2003) Int J Plasticity 19:1843. doi: https://doi.org/10.1016/S0749-6419(03)00039-110.1016/S0749-6419(03)00039-1 ↗
30. Jäger A, Lukáč P, Gärtnerová V, Bohlen J, Kainer KU (2004) J Alloys Compd 378:184. doi: https://doi.org/10.1016/j.jallcom.2003.11.17310.1016/j.jallcom.2003.11.173 ↗
31. Yoo MH (1981) Metall Mater Trans A 12A:40910.1007/BF02648537 ↗
32. Courteny TH (1990) Mechanical behavior of materials. McGraw-Hill, New York
33. Yoo MH, Agnew SR, Morris JR, Ho KM (2001) Mater Sci Eng A 319–321:8710.1016/S0921-5093(01)01027-9 ↗
34. Puschl W (2002) Prog Mater Sci 47:415. doi: https://doi.org/10.1016/S0079-6425(01)00003-210.1016/S0079-6425(01)00003-2 ↗
35. Kaibyshev R, Sitdikov O (1994) Z Met Kd 85:738
36. Zhenhua C, Weijun X, Hongge Y, Dingfa F, Jihua C (2004) Chem Ind Eng Progress 23:127
37. Derby B (1991) Acta Metall Mater 39:955. doi: https://doi.org/10.1016/0956-7151(91)90295-C10.1016/0956-7151(91)90295-C ↗