journal article·2011-05

A sol–gel-derived α-Al2O3 crystal interlayer modified 316L porous stainless steel to support TiO2, SiO2, and TiO2–SiO2 hybrid membranes

Zhonghong Li, Zupei Yang, Nongxue Qiu, Gongming Yang

Journal of Materials Science· Volume 46· Issue 9
Publisher page

Abstract

A homogeneous α-Al2O3 crystal membrane was fabricated by the sol–gel technique on 316L porous stainless steel (PSS) substrate with an average pore size of 1.0 μm. The preparation process was optimized by carefully choosing the binder, the concentrations of the casting solutions and the sintering temperatures of the membranes. Compared to methylcellulose and polyethylene glycol 20000, polyvinyl alcohol 1750 was found to be the most effective binder to fabricate a homogeneously structured Al2O3 membrane without defects. The concentration to prepare an uniform coverage membrane with a thickness of ~10 μm was 0.032 mol/L. When sintered at 1000 °C, γ-Al2O3 membrane with ~3 μm grains was obtained. When sintered at 1200 °C, γ-Al2O3 completely transformed into α-Al2O3 and the grains grew to ~5 μm. Accordingly, the process was applied to a bigger pore-sized PSS with an average pore size of 1.5 μm to fabricate an α-Al2O3 intermediate layer to initially modify its surface. A single α-Al2O3 crystal layer with a thickness of ~5 μm and an average pore size of 0.7 μm was achieved. Subsequently, TiO2, SiO2, and TiO2–SiO2 hybrid membranes were tried on the modified PSS. Defect-free microfiltration membranes with average pore sizes of ~0.3 μm were readily fabricated. The results indicate that the sol–gel method is promising to initially modify the PSS substrates and the sol–gel-derived α-Al2O3 crystal layer is an appropriate intermediate layer to modify the PSS and to support smaller grain-sized top membranes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Catalytic Processes in Materials Science · Advanced ceramic materials synthesis · Catalysis and Hydrodesulfurization Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. Li Z, Qiu N, Yang G, Fan F (2005) CSAE 21(1):177
2. Van Gestel T, Sebold D, Meulenberg WA, Bram M, Buchkremer H-P (2008) Solid State Ionics 179:136010.1016/j.ssi.2008.02.046 ↗
3. Guizard C, Garcia F, Larbot A, Cot L (1989) In: Proceedings 1st international conference on inorganic membranes ICIM, Montpellier, pp 405–409
4. Brunetti A, Barbieri G, Drioli E, Lee K-H, Sea B, Lee D-W (2007) Chem Eng Process 46:11910.1016/j.cep.2006.05.005 ↗
5. Lee D-W, Park S-J, Yu C-Y, Ihm S-K, Lee K-H (2007) J Membr Sci 302:26510.1016/j.memsci.2007.06.054 ↗
6. Kong C, Lu J, Yang J, Wang J (2006) J Membr Sci 285:25810.1016/j.memsci.2006.08.027 ↗
7. Li AW, Grace JR, Lim CJ (2007) J Membr Sci 298:17510.1016/j.memsci.2007.04.016 ↗
8. Ayturk ME, Mardilovich IP, Engwall EE, Ma YH (2006) J Membr Sci 285:38510.1016/j.memsci.2006.09.008 ↗
9. Chen YJ, Dionysiou DD (2007) Appl Catal A Gen 317:12910.1016/j.apcata.2006.10.025 ↗
10. Chen YJ, Dionysiou DD (2006) Appl Catal B Environ 62:25510.1016/j.apcatb.2005.07.017 ↗
11. Shah TN, Foley HC, Zydney AL (2007) J Membr Sci 295:4010.1016/j.memsci.2007.02.030 ↗
12. Merritt A, Rajagopalan R, Foley HC (2007) Carbon 45:126710.1016/j.carbon.2007.01.022 ↗
13. Burggraaf AJ (1994) In: Yi Hua Ma (ed) Proceedings of the third international conference on inorganic membranes. Worcester Polytechnic Institute, Worcester, pp 1–16
14. Zaspalis VT, Praag WV, Keizer K, Ross JRH, Burggraaf AJ (1992) J Mater Sci 27:1023. doi: 10.1007/BF0119765710.1007/BF01197657 ↗
15. Van Gestel T, Sebold D, Kruidhof H, Bouwmeester HJM (2008) J Membr Sci 318:41310.1016/j.memsci.2008.03.003 ↗
16. Lee D-W, Lee Y-G, Nam S-E, Ihm S-K, Lee K-H (2003) J Membr Sci 220:13710.1016/S0376-7388(03)00225-4 ↗
17. Lee D-W, Yu C-Y, Lee K-H (2008) J Colloid Interface Sci 325:44710.1016/j.jcis.2008.06.021 ↗
18. Elmaleha S, Jaafarib K, Julbeb A, Randonb J, Cot L (1994) J Membr Sci 97:12710.1016/0376-7388(94)00154-Q ↗
19. Huang Y, Dittmeyer R (2007) J Membr Sci 302:16010.1016/j.memsci.2007.06.040 ↗
20. Hyun H, Kang BS (1996) J Am Ceram Soc 79:27910.1111/j.1151-2916.1996.tb07910.x ↗
21. Chang Q, Zhang L, Liu X, Peng D, Meng G (2005) J Membr Sci 250:10510.1016/j.memsci.2004.10.020 ↗
22. Choi H, Stathatos E, Dionysiou DD (2006) Appl Catal B Environ 63:6010.1016/j.apcatb.2005.09.012 ↗
23. Van Gestel T, der Bruggen BV, Buekenhoudt A, Dotremont C, Luyten J, Maes G (2003) J Membr Sci 224:310.1016/S0376-7388(03)00132-7 ↗
24. Van Gestel T, Vandecasteele C, Buekenhoudt A, Dotremont C, Luyten J, Leysen R, Van der Bruggen B, Maes G (2002) J Membr Sci 209:37910.1016/S0376-7388(02)00311-3 ↗
25. Van Gestel T, Kruidhof H, Blank DHA, Bouwmeester HJM (2006) J Membr Sci 284:12810.1016/j.memsci.2006.07.020 ↗
26. Fujii T, Yano T, Nakamura K, Miyawaki O (2001) J Membr Sci 187:17110.1016/S0376-7388(01)00338-6 ↗
27. Kingsbury BFK, Li K (2009) J Membr Sci 328:13410.1016/j.memsci.2008.11.050 ↗
28. Van Gestel T, Vandecasteele C, Buekenhoudt A, Dotremont C, Luyten J, Leysen R, Van der Bruggen B, Maes G (2002) J Membr Sci 207:7310.1016/S0376-7388(02)00053-4 ↗
29. Sasaki Y, Shimizu W, Ando Y, Saka H (2000) Microporous Mesoporous Mater 40:6310.1016/S1387-1811(00)00231-6 ↗
30. Yoldas BE (1975) J Mater Sci 10:1856. doi: 10.1007/BF0075447310.1007/BF00754473 ↗
31. Li Z, Qiu N, Yang Z, Yang G (2005) CSAE 21(9):110.1016/j.colsurfa.2004.10.071 ↗
32. Li Z, Qiu N, Yang G (2009) J Membr Sci 326:53310.1016/j.memsci.2008.10.035 ↗
33. Li Z, Qiu N, Tian X, Yang G (2008) CSAE 24(5):25
34. Lafarga D, Lafuente A, Menéndez M, Santamaría J (1998) J Membr Sci 147:17310.1016/S0376-7388(98)00134-3 ↗