journal article·2011-03

Synthesis and characterization of composite membrane by deposition of acrylic acid plasma polymer onto pre-treated polyethersulfone support

Betina Villagra Di Carlo, Juan Carlos Gottifredi, Alberto Claudio Habert

Journal of Materials Science· Volume 46· Issue 6
Publisher page

Abstract

The plasma techniques were explored to deposit a layer of hydrophilic polymer on asymmetric porous membranes used as support material. Microporous membranes were synthesized by the phase inversion technique from polyethersulfone (PES) and submitted to a surface treatment with RF-plasma of non-polymerizable gas. Carbon dioxide (CO2) was selected to generate this plasma and to increase the surface energy. Further plasma treatment proceeded with acrylic acid (AA) in vapor phase as source for the permanent surface hydrophilic functionalization. The infrared spectra with horizontal attenuated total reflectance (HATR) show that the deposited plasma polymer provides a high concentration of carbonyl and hydroxyl groups. The hydrophilic polymer layer was evenly deposited, with good adhesion to the support, as was observed by electronic microscopy (SEM). The surface free energy (γS) was increased through plasma treatments and confirmed by the decrease of contact angle (θ) measurements and increase of adhesion work (Wa). The nitrogen permeability decreased 650 times; after that a dense thin film was deposited by plasma treatment during 40 min (at 5 W and 8 Pa). Final composite membranes show stability, high surface hydrophilicity, and a surface chemical nature very stable with time.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Membrane Separation and Gas Transport · Surface Modification and Superhydrophobicity · Advanced Sensor and Energy Harvesting Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Lee KR, Teng MY, Lee HH, Lai JY (2000) J Memb Sci 164:1310.1016/S0376-7388(99)00097-6 ↗
2. Ma X, Su Y, Sun Q, Wang Y, Jiang Z (2007) J Memb Sci 300:7110.1016/j.memsci.2007.05.008 ↗
3. Belfer S, Fainchtain R, Purinson Y, Kedem O (2000) J Memb Sci 172:11310.1016/S0376-7388(00)00316-1 ↗
4. Deng B, Li J, Hou Z, Yao S, Shi L, Liang G, Sheng K (2008) Radiat Phys Chem 77:89810.1016/j.radphyschem.2008.02.008 ↗
5. Idris A, Zain NM, Noordin MY (2007) Desalination 207:32410.1016/j.desal.2006.08.008 ↗
6. Kim H, Kim S (2001) J Memb Sci 190:2110.1016/S0376-7388(01)00380-5 ↗
7. Su CY, Lin CK, Lin CR, Lin CH (2006) Surf Coat Technol 200:338010.1016/j.surfcoat.2005.07.056 ↗
8. Upadhyay DJ, Bhat NV (2004) J Memb Sci 239:25510.1016/j.memsci.2004.03.041 ↗
9. Tran DT, Mori S, Suzuki M (2008) Thin Solid Films 516:438410.1016/j.tsf.2007.10.069 ↗
10. Oehr C, Muller M, Elkin B, Hegemann D, Vohrer U (1999) Surf Coat Technol 116–119:2510.1016/S0257-8972(99)00201-7 ↗
11. Dayss E, Leps G, Meinhardt J (1999) Surf Coat Technol 116–119:98610.1016/S0257-8972(99)00184-X ↗
12. Kelly JM, Short RD, Alexander MR (2003) Polymer 44:317310.1016/S0032-3861(03)00217-9 ↗
13. Yasuda H (1985) Plasma polymerization. Academic Press, New York
14. Shi FF (1996) Review. Surf Coat Technol 82:110.1016/0257-8972(95)02621-5 ↗
15. Wavhal DS, Fisher ER (2002) J Memb Sci 209:25510.1016/S0376-7388(02)00352-6 ↗
16. Sciarratta V, Vohrer U, Hegemann D, Müller M, Oehr C (2003) Surf Coat Technol 174–175:80510.1016/S0257-8972(03)00564-4 ↗
17. Tran ND, Dutta NK, Choudhury NR (2005) Thin Solid Films 491:12310.1016/j.tsf.2005.05.046 ↗
18. Pereira CC, Nobrega R, Borges CP (2001) J Memb Sci 192:1110.1016/S0376-7388(01)00483-5 ↗
19. Wavhal DS, Fisher ER (2005) Desalination 172:18910.1016/j.desal.2004.06.201 ↗
20. Weibel DE, Vilani C, Habert AC, Achete CA (2007) J Memb Sci 293:12410.1016/j.memsci.2007.02.005 ↗
21. Kwok DY, Neumann AW (2000) Colloids Surf A Physicochem Eng Asp 161:3110.1016/S0927-7757(99)00323-4 ↗
22. Tabaliov NA, Svirachev DM (2007) Appl Surf Sci 253:424210.1016/j.apsusc.2006.09.024 ↗
23. Klages CP, Grishin A (2008) Plasma Process Polym 5:35910.1002/ppap.200700135 ↗
24. Chapman CL, Bhattachary D, Eberhart RC, Timmons RB, Chuong CJ (2008) J Memb Sci 318:13710.1016/j.memsci.2008.02.030 ↗
25. Lopez JL, Matson SL, Marchese J, Quinn JA (1986) J Memb Sci 27:30110.1016/0376-7388(86)80002-3 ↗
26. Matson SL, Lopez J, Quinn JA (1983) Chem Eng Sci 38:50310.1016/0009-2509(83)80111-0 ↗
27. Khulbe KC, Feng CY, Matsuura T (2008) Synthetic polymeric membranes: characterization by atomic force microscopy. Springer-Verlag, Berlin Heidelberg
28. Gancarz I, Pozniak G, Bryjak M (1999) Eur Polym J 35:141910.1016/S0014-3057(98)00240-7 ↗
29. Wavhal DS, Fisher ER (2002) J Polym Sci B Polym Phys 40:247310.1002/polb.10308 ↗
30. Hegemann D, Brunner H, Oehr C (2003) Nucl Instrum Methods Phys Res B 208:28110.1016/S0168-583X(03)00644-X ↗
31. Tran T, Mori S, Suzuki M (2007) Thin Solid Films 515:414810.1016/j.tsf.2006.02.045 ↗
32. Solak EK, Asman G, Camurlu P, Sanli O (2008) Vacuum 82:57910.1016/j.vacuum.2007.08.012 ↗
33. Baker RW (2004) Membrane technology and applications. Wiley, Chichester10.1002/0470020393 ↗