journal article·2012-11

Analysis of microstructure and microhardness of Zr-2.5Nb processed by High-Pressure Torsion (HPT)

Mychelle Vianna Pereira Companhoni, Jose Ricardo Gomes Matheus, Tatiana Lisboa Marcondes, Andre Luiz Pinto

Journal of Materials Science· Volume 47· Issue 22
Publisher page

Abstract

Nanostructured materials have been widely studied due to the improvement of their mechanical properties comparing to those of coarse grain materials. The present work intended to analyze the microstructure and microhardness of Zr-2.5Nb processed by high-pressure torsion (HPT), one of the severe plastic deformation techniques. The deformations were carried out at room temperature using a pressure of 5 GPa and 5 anvil turns. Vickers indentation was used to evaluate the microhardness of the samples. Transmission electron microscopy and X-ray diffraction were used to analyze the microstructure. The results showed a significant refinement from the initial microstructure achieving nanometric grain size around 50 nm and phase transformation α → ω + βI induced by shear. The Vickers microhardness values of the material submitted to HPT technique were significantly higher than those of non-deformed material. Also, HPT procedure resulted in a huge grain refinement of the material and in phase transformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and mechanical properties · Boron and Carbon Nanomaterials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Meyers MA, Mishra A, Benson DJ (2006) Prog Mater Sci 51:42710.1016/j.pmatsci.2005.08.003 ↗
2. Molnar P, Jager A, Lejcek P (2012) J Mater Sci 47:3265. doi: 10.1007/s10853-011-6165-510.1007/s10853-011-6165-5 ↗
3. Thomsen P, Larsson C, Ericson LE (1997) J Mater Sci Mater Med 8:65310.1023/A:1018579605426 ↗
4. Branzoi IV et al (2008) Surf Interface Anal 40:1710.1002/sia.2750 ↗
5. Rosalbino F et al (2011) J Mater Sci Mater Med 22:129310.1007/s10856-011-4301-z ↗
6. Lin YP, Woo OT (2000) J Nucl Mater 277:1110.1016/S0022-3115(99)00153-1 ↗
7. Jamieson JC (1963) Science 140:7210.1126/science.140.3562.72 ↗
8. Todaka Y, Sasaki J, Moto T, Umemoto M (2008) Scripta Mater 59:61510.1016/j.scriptamat.2008.05.015 ↗
9. Pérez-Prado MT, Gimazov AAR, Kassner ME, Zhilyaev AP (2008) Scripta Mater 58:21910.1016/j.scriptamat.2007.09.043 ↗
10. Zhilyaev AP, Gálvez F, Sharafutdinov A, Pérez-Prado MT (2010) Mater Sci Eng A 527:391810.1016/j.msea.2010.02.066 ↗
11. Rauch EF, Portillo J, Nicolopoulos S, Bultreys D, Rouvimov S, Moeck P (2010) Z Zristallogr 225:10310.1524/zkri.2010.1205 ↗
12. Nam C, Lin J, Li H, Szpunar JA, Holt R (2006) J Nucl Mater 353:13510.1016/j.jnucmat.2006.02.091 ↗
13. Olinger B, Jamieson JC (1973) High Temp High Press 5:123
14. Xia H, Duclos SJ, Ruoff AL, Vohra YK (1990) Phys Rev Lett 64(2):20410.1103/PhysRevLett.64.204 ↗
15. Edalati K, Horita Z, Yagi S, Matsubara E (2009) Mater Sci Eng A 523:27710.1016/j.msea.2009.07.029 ↗
16. Perez-Prado MT, Zhilyaev AP (2009) Phys Rev Lett 102:17550410.1103/PhysRevLett.102.175504 ↗
17. Zhilyaev AP, Sabirov I, González-Doncel G, Molina-Aldareguía J, Srinivasarao B, Pérez-Prado MT (2011) Mater Sci Eng A 528:349610.1016/j.msea.2011.01.062 ↗
18. Zhilyaev AP, Langdon TG (2008) Prog Mater Sci 53:89310.1016/j.pmatsci.2008.03.002 ↗