journal article·2006-08-29

Ageing behavior of Al–4.5 wt% Cu matrix alloy reinforced with Al2O3 and ZrSiO4 particulate varying particle size

Sanjeev Das, S. Das, K. Das

Journal of Materials Science· Volume 41· Issue 16
Publisher page

Abstract

Age hardening behavior of Aluminum metal matrix composite has been of great interest of present research. The nature of change in kinetics and magnitude of hardening during ageing of composites depends on matrix material [1, 2], type of reinforcement including its size, shape and volume fraction [2, 3], method of synthesizing the composite [2], post fabrication treatment [4, 5] and temperature of ageing [1, 2]. It has been conclusively shown that the presence of ceramic reinforcement such as SiC/Al2O3 (whiskers, particle or short fibers) lead to acceleration in the ageing kinetics when compared with the unreinforced alloy [3–13]. This behavior generally has been attributed to enhanced nucleation and growth due to the presence of high matrix dislocation densities, which is generated due to the coefficient of thermal expansion (CTE) mismatch between the matrix and the reinforcements [14]. Matrix dislocations have been found to reduce the incubation time for heterogeneous nucleation of strengthening precipitates, as well as to increase solute diffusivity in the composite matrix. However, it has also been reported that the precipitation sequence was not affected by reinforcement of the aluminum alloy but the volume fraction of GP zones decreased with increasing reinforcement [15, 16]. Selection of ceramic reinforcement in the current research has been constricted to few reinforcement types like Al2O3, SiC and B4C. Limited work has been reported on fabrication and characterization of ZrSiO4 reinforced with aluminum metal matrix composites. ZrSiO4 possess high hardness, high modulus of elasticity, and excellent thermal stability. Banerji et al. found improvement in hardness, abrasive wear resistance, elastic modulus, 0.2% proof stress, and UTS of cast Al–3 wt% Mg alloy due to dispersions of ZrSiO4 particles [17, 18], which makes ZrSiO4 reinforced composite an important material for industries like aerospace, military, automobiles etc. Also, the coefficient of thermal expansion of ZrSiO4 is comparable to that of SiC. Hence the influence of ZrSiO4 reinforcement in ageing behavior of Al–4.5 wt% Cu matrix composite was found to be interesting. In the present investigation, a comparative study on ageing behavior of Al2O3 and ZrSiO4 reinforced in Al–4.5 wt% Cu composite synthesized by stir casting route was carried out. Microstructural characterization has been carried out to investigate the effect Al2O3 and ZrSiO4 particulates on the microstructure of Al–4.5 wt% Cu matrix composite. Effect of particle size and type on ageing hardening behavior of Al–4.5 wt% Cu were studied and correlated.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Rack HJ (1988) In: Kim YW, Griffith WM (eds) Dispersion strengthened aluminum alloys. The Minerals, Metal and Materials Society, p 649
2. Harris SJ, Cai HW, Weatherbern PC (1993) In: Chandra T, Dhingra AK (eds) Advanced composites’93, International Conference on Advances in composite Materials. The Minerals, Metals and Materials Society
3. Dutta I, Allen SM, Hafley JL (1991) Metal Trans 22A:255310.1007/BF02851349 ↗
4. Mcnelley TR, Kalu PN (1991) Scripta Metal 25:104110.1016/0956-716X(91)90498-P ↗
5. Srinivasan D, Surappa MK (1992) Scripta Metal 27:113910.1016/0956-716X(92)90588-6 ↗
6. Varma VK, Mahajan YR, Kutumbarao VV (1997) Scripta Mater 37:48510.1016/S1359-6462(97)00107-3 ↗
7. Dutta B, Surappa MK (1995) Scripta Metal Mater 32:73110.1016/0956-716X(95)91594-F ↗
8. Daoud A, Reif W (2002) J Mater Process Technol 123:31310.1016/S0924-0136(02)00103-6 ↗
9. El-Bradie ZM, Abd El-Azim AN (1997) J Mater Process Technol 66:7310.1016/S0924-0136(96)02497-1 ↗
10. Parrini L, Schaller R (1995) Acta Metal Mater 43:214910.1016/0956-7151(94)00443-9 ↗
11. Gupta M, Surappa MK (1995) Mater Res Bull 30:102310.1016/0025-5408(95)00076-3 ↗
12. Gupta M, Qin S, Chin LW (1997) J Mater Process Technol 65:24510.1016/S0924-0136(96)02277-7 ↗
13. Dong SL, Mao JF, Yang DZ, Cui YX, Jiang LT (2002) Mater Sci Eng A 327:21310.1016/S0921-5093(01)01538-6 ↗
14. Dutta I, Harper CP, Dutta G (1994) Metal Mater Trans A 25A:159110.1007/BF02668525 ↗
15. Papazian JM, Levy A, Alder PN (1987) Technical report AFOSER-TR-87–1658, USA
16. Kim TS, Kim TH (1992) J Mater Sci 27:259910.1007/BF00540675 ↗
17. Banerji A, Surappa MK, Rohatgi PK (1993) Metal Trans B 14B:273
18. Banerji A, Prasad SV, Surappa MK, Rohatgi PK (1982) Wear 82:14110.1016/0043-1648(82)90288-5 ↗
19. Hashim J, Looney L, Hashmi MSJ (1999) J Mater Process Technol 92–93:110.1016/S0924-0136(99)00118-1 ↗
20. Kang CJ, Ray S, Rahotagi PK (1994) Mater Sci Eng A 188:19310.1016/0921-5093(94)90372-7 ↗