An investigation of the structure–property relationships in melt-processable high-acrylonitrile copolymer filaments
Source abstract
Abstract
A comprehensive investigation was undertaken to understand why the structure of a high-acrylonitrile (AN) resin renders it melt processable, how it affects the microstructure, and what filament properties it supports. High-AN homo- and copolymers have excellent chemical and ultraviolet light resistances that make them suited for many engineered industrial applications. Traditionally, these AN-copolymers are dissolved in a solvent and extruded into fibers by dry and wet spinning, because they tend to degrade rather than melt. Recent advances in copolymer synthesis have created the first AN-resins that can be melt processed, and, are produced more economically and in an environmentally friendly way. The block distributions were examined using solution nuclear magnetic resonance. Thermal behavior of the solid-to-ductile transitions was observed with differential scanning calorimetry to gain insight into the nature of the temperature-dependent solid-state interactions between chains. Filament extrusion was conducted utilizing a range of parameters to obtain filaments varying in structures and properties. Wide-angle X-ray diffraction was used to gain insight into the solid-state conformations and organization of the copolymer chains. It is concluded that melt-extruded filaments do not develop a distinct semi-crystalline morphology, but instead tend to develop a paracrystalline ordered structure. Mechanical properties can be varied, and under optimal conditions, compare favorably with those found in other melt-extruded polymer fibers that are not, resistant to chemical and UV exposure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Polymer crystallization and properties · Fiber-reinforced polymer composites · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. Frushour B, Knorr R (1985) In: Lewin M, Pearce E (eds) Handbook of fiber chemistry, vol 4. Marcel Dekker, New York
2. Wade B, Knorr R (1985) In: Masson J (ed) Acrylic fiber technology and applications. Marcel Dekker, New York
3. Dunn P, Ennis B (1970) J Appl Polym Sci 14:1795. doi:https://doi.org/10.1002/app.1970.07014071310.1002/app.1970.070140713 ↗
4. Korte S (1999) In: Brandrup J, Emmergut E, Grulke E (eds) Polymer handbook. John Wiley, New York
5. Mandelkern L (2002) Crystallization of polymers, vol 1. Cambridge University Press, Cambridge
6. Lindenmeyer P, Hosemann R (1963) J Appl Phys 34:42. doi:https://doi.org/10.1063/1.172908610.1063/1.1729086 ↗
7. Bohn C, Schaefgen J, Statton W (1961) J Polym Sci 55:531. doi:https://doi.org/10.1002/pol.1961.120551621210.1002/pol.1961.1205516212 ↗
8. Yamadera R, Murano M (1967) J Polym Sci A 5:1059. doi:https://doi.org/10.1002/pol.1967.15005051110.1002/pol.1967.150050511 ↗
9. Bajaj P, Padmanaban M, Gandhi R (1985) Polymer (Guildf) 26:391. doi:https://doi.org/10.1016/0032-3861(85)90200-910.1016/0032-3861(85)90200-9 ↗
10. Schaefer J (1971) Macromolecules 4:105. doi:https://doi.org/10.1021/ma60019a02210.1021/ma60019a022 ↗
11. Hobson R, Windle A (1993) Polymer (Guildf) 34:3582. doi:https://doi.org/10.1016/0032-3861(93)90041-810.1016/0032-3861(93)90041-8 ↗
12. Minagawa M, Ute K, Kitayama T et al (1994) Macromolecules 27:3669. doi:https://doi.org/10.1021/ma00091a03210.1021/ma00091a032 ↗
13. Minagawa M, Taira T, Yabuta Y et al (2001) Macromolecules 34:3679. doi:https://doi.org/10.1021/ma002173e10.1021/ma002173e ↗
14. Lee L, Register R (2005) Macromolecules 38:1216. doi:https://doi.org/10.1021/ma048013a10.1021/ma048013a ↗
15. Flory P (1958) J Trans Faraday Soc 51:848. doi:https://doi.org/10.1039/tf955510084810.1039/tf9555100848 ↗
16. Eby R (1963) J Appl Phys 34:2442. doi:https://doi.org/10.1063/1.170276310.1063/1.1702763 ↗
17. Flory P (1949) J Chem Phys 17:223. doi:https://doi.org/10.1063/1.174723010.1063/1.1747230 ↗
18. Lewis F, Mayo F, Hulse W (1945) J Am Chem Soc 67:1701. doi:https://doi.org/10.1021/ja01226a02510.1021/ja01226a025 ↗
19. Smierciak R, Wardlow E, Lawrence B (1997) US Patent 5 602 222
20. Dimitratos J, El-Aasser M, Georgakis C et al (1990) J Appl Polym Sci 40:1005. doi:https://doi.org/10.1002/app.1990.07040053310.1002/app.1990.070400533 ↗
21. Henrici-Olive G, Olive S (1979) Adv Polym Sci 32:128
22. Holland V (1960) J Polym Sci XLIII:572. doi:https://doi.org/10.1002/pol.1960.120431422910.1002/pol.1960.1204314229 ↗
23. Holland V, Lindenmeyer P, Mitchell S et al (1962) J Polym Sci 62:145. doi:https://doi.org/10.1002/pol.1962.120621731010.1002/pol.1962.1206217310 ↗
24. Klement J, Geil P (1968) J Polym Sci A-2 6:138110.1002/pol.1968.160060714 ↗
25. Hinrichsen V (1972) J Polym Sci C 38:30310.1002/polc.5070380123 ↗
26. Joh Y (1979) J Polym Sci A-1 17:4051
27. Kulshreshtha A, Garg V, Sharma Y et al (1986) J Appl Polym Sci 31:1413. doi:https://doi.org/10.1002/app.1986.07031052510.1002/app.1986.070310525 ↗
28. Grobelny J, Sokol M, Turska E (1989) Polymer (Guildf) 30:1187. doi:https://doi.org/10.1016/0032-3861(89)90035-910.1016/0032-3861(89)90035-9 ↗
29. Hutchinson S (2005) M.S. Thesis, North Carolina State University, Raleigh NC, USA
30. Odian G (2004) Principles of polymerization. Wiley-Interscience, Hoboken, NJ10.1002/047147875X ↗
31. Gupta A, Singhal R, Bajaj P (1983) J Appl Polym Sci 28:1167. doi:https://doi.org/10.1002/app.1983.07028032210.1002/app.1983.070280322 ↗
32. Stefani R, Chevreton M, Garnier M et al (1960) Compt Rend 251:2174
33. Colvin B (1974) Eur Polym J 10:337. doi:https://doi.org/10.1016/0014-3057(74)90147-510.1016/0014-3057(74)90147-5 ↗
34. Moseley W (1960) J Appl Polym Sci III:266. doi:https://doi.org/10.1002/app.1960.07003090210.1002/app.1960.070030902 ↗
35. Henrici-Olive G, Olive S, Frushour B (1986) Makromol Chem 187:1801. doi:https://doi.org/10.1002/macp.1986.02187072310.1002/macp.1986.021870723 ↗
36. Azuma C, Dias M, Mano E (1995) Polym Bull 34:593. doi:https://doi.org/10.1007/BF0042335610.1007/BF00423356 ↗
37. Brar A, Sunita (1991) In: Sivaram S (ed) Polymer science, vol 2. Tata McGraw-Hill, New Delhi
38. Brar A, Sunita (1992) J Polym Sci A 30:2549. doi:https://doi.org/10.1002/pola.1992.08030120910.1002/pola.1992.080301209 ↗
39. Bunsell A, Hearle J, Konopasek L et al (1974) J Appl Polym Sci 18:2229. doi:https://doi.org/10.1002/app.1974.07018080210.1002/app.1974.070180802 ↗
40. Xue T, McKinney M, Wilkie C (1997) Polym Degrad Stabil 58:193. doi:https://doi.org/10.1016/S0141-3910(97)00048-710.1016/S0141-3910(97)00048-7 ↗
41. Ward I (1997) In: Ward I (ed) Structure and properties of oriented polymers. Chapman & Hall, London10.1007/978-94-011-5844-2 ↗
42. Kumamaru F, Kajiyama T, Takayanagi M (1980) J Cryst Growth 48:202. doi:https://doi.org/10.1016/0022-0248(80)90210-910.1016/0022-0248(80)90210-9 ↗
43. Mehta R (1999) In: Brandrup J, Immergut E, Grulke E (eds) Polymer handbook. John Wiley, New York
44. Kerbow D, Sperati C (1999) In: Brandrup J, Immergut E, Grulke E (eds) Polymer handbook. John Wiley, New York
45. Morton W, Hearle J (1993) Physical properties of textile fibers. Textile Institute, Manchester
46. Hinrichsen V (1971) Angew Makromol Chem 285:12110.1002/apmc.1971.050200110 ↗
47. Frushour B (1981) Polym Bull 4:305. doi:https://doi.org/10.1007/BF0025510810.1007/BF00255108 ↗
48. Frushour B (1982) Polym Bull 7:1. doi:https://doi.org/10.1007/BF0026415010.1007/BF00264150 ↗
49. Frushour B (1984) Polym Bull 11:375. doi:https://doi.org/10.1007/BF0025427710.1007/BF00254277 ↗
50. Frushour B (1980) Bull Am Phys Soc 25:352
51. Slade P (1970) Therm Acta 1:459. doi:https://doi.org/10.1016/0040-6031(70)85016-X10.1016/0040-6031(70)85016-X ↗
52. Falkai V (1995) In: Masson J (ed) Acrylic fiber technology and applications. Marcel Dekker, New York
53. Lauterberg W, Kimmer W, Schmolke R (1968) Deu Textiltech 18:657
54. Tonelli A (1974) Macromolecules 10:716. doi:https://doi.org/10.1021/ma60057a04810.1021/ma60057a048 ↗
55. Tonelli A (1977) Macromolecules 7:632. doi:https://doi.org/10.1021/ma60041a01710.1021/ma60041a017 ↗
56. Frushour B (1995) In: Masson J (ed) Acrylic fiber technology and applications. Marcel Dekker, New York