journal article·2007-07

An experimental investigation of rate-dependent deformation and failure of three titanium alloys

Helen Sarsfield, Li Wang, Nikica Petrinic

Journal of Materials Science· Volume 42· Issue 13
Publisher page

Abstract

The response of three titanium alloys, Ti 6,4, Ti 550 and Ti 6,2,4,6, commonly used in aerospace applications, has been investigated at rates of strain between 10−4 and 103 s−1 in uniaxial tensile and compressive loading in ambient environment. This work identifies and discusses features of their behaviour that must be captured within material models developed for use in predictive modelling of response to in-service loading. That is, an increase in yield strength with increasing strain rate, a difference in yield strength between tensile and compressive loading regimes and, most importantly, the evolution of damage resulting in failure due to growth of voids in both tension and compression.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Velocity Impact and Material Behavior · Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. Rosen RS, Paddon SP, Kassner ME (1999) J Mater Eng Perform 8(3):36110.1361/105994999770346927 ↗
2. Zhou W, Chew KG (2002) J Mater Sci 37:5159, Doi: 10.1023/A:102108502622010.1023/A:1021085026220 ↗
3. El-Magd E, Treppmann C, Korthauer M (2003) J Phys IV France 110:14110.1051/jp4:20020684 ↗
4. MacDougall DAS, Harding J (1998) Intl J Impact Eng 21(6):47310.1016/S0734-743X(98)00007-4 ↗
5. Leyens C, Peters M (eds) (2003) Titanium and titanium alloys: fundamentals and applications. Wiley VCH10.1002/3527602119 ↗
6. Petrinic N, Wang L, Elliott BCF (2003) In 7th International Conference on Computational Plasticity, COMPLAS2003, Barcelona
7. Harding J, Wood EO (1960) J Mech Eng Sci 2:8810.1243/JMES_JOUR_1960_002_016_02 ↗
8. Taylor B, Weidmann E, Metallographic preparation of titanium. In: Struers Application Notes, http://www.struers.com, as on 8 March 2007
9. MacDougall D, Thissel R (2001) Damage accumulation in incipiently failed Ti-6Al-4V under high-rate loading. Materials Science and Technology Division, Los Alamos National Laboratory
10. Bammann DJ et al (1993) In: Jones M, Wierzbicki T (eds) Structural crashworthiness and failure. Elsevier Applied Science
11. Xue Q, Meyers MA, Nesterenko VF (2002) Acta Mater 50:57510.1016/S1359-6454(01)00356-1 ↗
12. Mannan SL, Rodriguez P (1973) Scripta Metal 7(10):106910.1016/0036-9748(73)90016-1 ↗
13. Chait R (1973) Scripta Metal 7(4):35110.1016/0036-9748(73)90054-9 ↗
14. Snowden KU (1971) Scripta Metal 5:46710.1016/0036-9748(71)90092-5 ↗
15. Leclercq SN, Nguy C, Bensussan P (1989) In: International conference of mechanical properties of materials at high rates of strain. Institute of Physics Conference, Oxford
16. Meyers MA, Armstrong RW, Kirchner HOK (eds) (1999) Mechanics and materials: fundamentals and linkages. Wiley Interscience
17. Meyers MA (1994) Dynamic behavior of materials. John Wiley & Sons, Inc., New York10.1002/9780470172278 ↗
18. Dieter GE (1961) Mechanical metallurgy. McGraw-Hill Book Company10.5962/bhl.title.35895 ↗
19. Cowper GR, Symonds PS (1958) In Applied mathematics report. Brown University. p 28
20. Zerilli FJ, Armstrong RW (1987) J Appl Phys 61(5):181610.1063/1.338024 ↗
21. Zerilli FJ, Armstrong RW (1992) Acta Metal Mater 40(8):180310.1016/0956-7151(92)90166-C ↗
22. Lee W-S, Lam HF (1996) J Mater Process Technol 57:23310.1016/0924-0136(95)02068-3 ↗