Effects of solvent system on tape casting of the BaSrTiO3-MgO-based dielectric ceramics containing B2O3
Source abstract
Abstract
Ba0.6Sr0.4TiO3-MgO-based ceramic slurries with B2O3 and Li2CO3 as sintering aid were prepared with different solvent systems for tape casting application. The effects of azeotropic mixtures of toluene–ethanol, methyl ethyl ketone (MEK)–ethanol and zeotrpic mixture of xylene–ethanol with a mass ratio of 50:50 on Ba0.6Sr0.4TiO3-MgO-based nonaqueous suspensions with B2O3 and Li2CO3 as sintering aid were investigated by sedimentation test, rheological measurement, density measurement, and SEM analysis. Without organic additives added, suspensions prepared with the MEK–ethanol mixture present higher flowability with lower viscosity, but less stability because of the smaller viscosity and density of MEK. On the other hand, with organic additives added, the gel structure is formed in slurries prepared with the toluene–ethanol mixture and xylene–ethanol mixture, caused by the reaction of the functional hydroxyl group of PVB and dissociated borate in the slurries. While slurries prepared with the MEK–ethanol mixture were more stable, exhibiting nearly Newtonian flow behavior and significantly lower viscosity.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Hu T, Jantunen H, Deleniv A, Leppävuori S, Gevorgian S (2004) J Am Ceram Soc 87(4):578. doi: 10.1111/j.1551-2916.2004.00578.x10.1111/j.1551-2916.2004.00578.x ↗
2. Hu T, Price TJ, Iddles DM, Uusimäki A, Jantunen H (2005) J Eur Ceram Soc 25:2531. doi: 10.1016/j.jeurceramsoc.2005.03.09510.1016/j.jeurceramsoc.2005.03.095 ↗
3. Chou X, Zhao Z, Zhang W, Zhai J (2010) Mater Des 31:3703. doi: 10.1016/j.matdes.2010.03.00610.1016/j.matdes.2010.03.006 ↗
4. Hu T, Jantunen H, Uusimäki A, Leppävuori S (2003) Mater Sci Semicond Process 5:215. doi: 10.1016/S1369-8001(02)00076-810.1016/S1369-8001(02)00076-8 ↗
5. Jiang H, Zhai J, Zhang J, Yao X (2009) J Am Ceram Soc 92(10):2319. doi: 10.1111/j.1551-2916.2009.03226.x10.1111/j.1551-2916.2009.03226.x ↗
6. Cho CW, Cho YS, Yeo JG, Kim J, Paik U (2003) J Eur Ceram Soc 23(13):2315. doi: 10.1016/S0955-2219(03)00087-610.1016/S0955-2219(03)00087-6 ↗
7. Cho CW, Hwang JH, Choi SC, Paik U, Lee MH (2006) Mater Chem Phys 99:418. doi: 10.1016/j.matchemphys.2005.11.01610.1016/j.matchemphys.2005.11.016 ↗
8. Vinothini V, Singh P, Balasubramanian M (2006) J Mater Sci 41:7082. doi: 10.1007/s10853-006-0940-810.1007/s10853-006-0940-8 ↗
9. Li CC, Jean JH (2005) Mater Chem Phys 94:78. doi: 10.1016/j.matchemphys.2005.04.03310.1016/j.matchemphys.2005.04.033 ↗
10. Cho CW, Cho YS, Yeo JG, Choi SC, Kim J, Paik U (2003) Colloids Surf, A: Physicochem Eng Aspects 224:83. doi: 10.1016/S0927-7757(03)00261-910.1016/S0927-7757(03)00261-9 ↗
11. Hu T, Uusimäki A, Jantunen H, Leppävuori S, Soponmanee K, Sirisoonthorn S (2005) Ceram Int 31(1):85. doi: 10.1016/j.ceramint.2004.03.03910.1016/j.ceramint.2004.03.039 ↗
12. Hwang JH, Lee BI, Kim DH, Wi SK (2006) Colloids Surf, A: Physicochem Eng Aspects 289:60. doi: 10.1016/j.colsurfa.2006.04.01510.1016/j.colsurfa.2006.04.015 ↗
13. Li CC, Jean JH (2002) J Am Ceram Soc 85(6):1441. doi: 10.1111/j.1151-2916.2002.tb00294.x10.1111/j.1151-2916.2002.tb00294.x ↗
14. Kim DH, Lim KY, Paik U, Jung YG (2004) J Eur Ceram Soc 24:733. doi: 10.1016/S0955-2219(03)00256-510.1016/S0955-2219(03)00256-5 ↗
15. Tseng WJ, Lin CL (2003) Mater Chem Phys 80:232. doi: 10.1016/S0254-0584(02)00479-010.1016/S0254-0584(02)00479-0 ↗
16. Chu LW, Prakash KN, Tsai MT, Lin IN (2008) J Eur Ceram Soc 28:1205. doi: 10.1016/j.jeurceramsoc.2007.10.01510.1016/j.jeurceramsoc.2007.10.015 ↗
17. Paik U, Hackley VA, Choi SC, Jung YG (1998) Colloids Surf, A: Physicochem Eng Aspects 135:77. doi: 10.1016/S0927-7757(97)00234-310.1016/S0927-7757(97)00234-3 ↗
18. Krishnakumar S, Somasundaran P (1996) Colloids Surf, A: Physicochem Eng Aspects 117:37. doi: 10.1016/0927-7757(96)03674-610.1016/0927-7757(96)03674-6 ↗
19. Moreno R (1992) Am Ceram Soc Bull 71(10):1521
20. Kim DH, Yeo JG, Jung YG, Choi SC, Paik U (2003) Mater Chem Phys 82:181. doi: 10.1016/S0254-0584(03)00203-710.1016/S0254-0584(03)00203-7 ↗
21. Fowkes FM, Mostafa MA (1978) Ind Eng Chem Prod Res Dev 17(1):3. doi: 10.1021/i360065a00210.1021/i360065a002 ↗
22. Gutierrez CA, Moreno R (2000) J Eur Ceram Soc 20:1527. doi: 10.1016/S0955-2219(99)00216-210.1016/S0955-2219(99)00216-2 ↗
23. Hsiue GH, Chu LW, Lin IN (2007) Colloids Surf, A: Physicochem Eng Aspects 294:212. doi: 10.1016/j.colsurfa.2006.08.01310.1016/j.colsurfa.2006.08.013 ↗
24. Feng JH, Dogan F (2000) J Am Ceram Soc 83(7):1681. doi: 10.1111/j.1151-2916.2000.tb01449.x10.1111/j.1151-2916.2000.tb01449.x ↗
25. Vasanthakumari KG, Natarajan R (2005) Adv Appl Ceram 104(2):73. doi: 10.1179/174367605X1663510.1179/174367605X16635 ↗
26. Salam LA, Matthews RD, Robertson H (2000) Mater Chem Phys 62:263. doi: 10.1016/S0254-0584(99)00191-110.1016/S0254-0584(99)00191-1 ↗
27. Reddy SB, Singh PP, Raghu N, Kumar V (2002) J Mater Sci 37:929. doi: 10.1023/A:101438752835310.1023/A:1014387528353 ↗
28. Jean JH, Yeh SF (2001) Mater Chem Phys 71:155. doi: 10.1016/S0254-0584(01)00278-410.1016/S0254-0584(01)00278-4 ↗