journal article·2004-09

Synthesis of a minute SiC product from polyvinylsilane with radiation curing Part I Radiation curing of polyvinylsilane

A. Idesaki, M. Sugimoto, S. Tanaka, M. Narisawa, K. Okamura, M. Itoh

Journal of Materials Science· Volume 39· Issue 18
Publisher page

Abstract

Irradiation effect of γ-ray on polyvinylsilane (PVS), which is a liquid organosilicon polymer, was investigated and the optimum curing condition to synthesize a minute SiC product with radiation curing was discussed. Room temperature and liquid nitrogen temperature (77 K) were examined as the irradiation temperature. In both cases, the cured PVS maintaining its formed shape could be obtained by γ-ray irradiation under vacuum, and the cured PVS in solid state at room temperature was obtained by irradiation with dose of above 3–4 MGy. It was found that the efficiency of crosslinking in case of the irradiation at room temperature is higher than that in case of irradiation at 77 K. The PVS injected into a mold was irradiated by γ-ray with dose of 3.6 MGy at room temperature under vacuum, and pyrolyzed at 1273 K in Ar gas atmosphere. As a result, minute SiC products which had similar shapes to the mold and the sizes of 30–60 μm were obtained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced ceramic materials synthesis · Silicone and Siloxane Chemistry · Copper Interconnects and Reliability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. L. A. LIEW, W. ZHANG, V. M. BRIGHT, L. AN, M. L. DUNN and R. RAJ, Sens. Act. A 89 (2001) 64.10.1016/S0924-4247(00)00545-8 ↗
2. L. A. LIEW, Y. LIU, R. LUO, T. CROSS, L. AN, V. M. BRIGHT, M. L. DUNN, J. W. DAILY and R. RAJ, ibid. A 95 (2002) 120.10.1016/S0924-4247(01)00723-3 ↗
3. R. A. SARAVANAN, L. A. LIEW, V. M. BRIGHT and R. RAJ, J. Amer. Ceram. Soc. 86 (2003) 1217.10.1111/j.1151-2916.2003.tb03453.x ↗
4. W. BAUER and R. KNITTER, J. Mater. Sci. 37 (2002) 3127.10.1023/A:1016150126206 ↗
5. J. F. LI, S. SUGIMOTO, S. TANAKA, M. ESASHI and R. WATANABE, J. Amer. Ceram. Soc. 85 (2002) 261.10.1111/j.1151-2916.2002.tb00077.x ↗
6. P. COLOMBO, K. PERINI, E. BERNARDO, T. CAPELLETTI and G. MACCAGNAN, ibid. 86 (2003) 1025.10.1111/j.1151-2916.2003.tb03413.x ↗
7. P. ASPENBERG, A. ANTTILA, Y. T. KONTTINEN, R. LAPPALAINEN, S. B. GOODMAN, L. NORDSLETTEN and S. SANTAVIRTA, Biomaterials 17 (1996) 807.10.1016/0142-9612(96)81418-9 ↗
8. A. IDESAKI, Y. MIWA, Y. KATASE, M. NARISAWA, K. OKAMURA and M. ITOH, J. Mater. Sci. 38 (2003) 2591.10.1023/A:1024470115744 ↗
9. M. ITOH, K. IWATA, M. KOBAYASHI, R. TAKEUCHI and T. KABEYA, Macromolecules 31 (1998) 5609.10.1021/ma980488c ↗
10. Y. HARUYAMA, Y. MORITA, T. SEGUCHI, R. TANAKA, T. KANAZAWA, K. YOTSUMOTO and K. YOSHIDA, "Report of Japan Atomic Energy Research Institute," JAERI-M 88–197 (1988).
11. "Chemical Bond Energy" in Chemical Handbook, Vol. 2, edited by S. Seki (Maruzen Co. Ltd., Tokyo, Japan, 1975) p. 975.
12. M. SATOH, T. YAMAMURA, T. SEGUCHI and K. OKAMURA, J. Chem. Soc. Jpn. 5 (1990) 554.