journal article·2007-06

Bis-ortho-diynylarene polymerization as a route to solid and hollow carbon fibers

Huseyin Zengin, Dennis W. Smith

Journal of Materials Science· Volume 42· Issue 12
Publisher page

Abstract

The preparation, fabrication, and carbonization of bis-ortho-diynylarene (BODA)-derived polymers are described. BODA monomers undergo thermal step-growth polymerization to reactive and processable branched polyarylene intermediates. Well-defined intermediates with controlled conversion, molecular weight and viscosity, along with solution or melt processing allow for control in ultimate carbon structure. Fabrication followed by thermal cure and carbonization results in solid or hollow carbon fiber prototypes with interesting thermal and electrical properties. The BODA polymerization and fiber formation were investigated by differential scanning calorimetry, and gel permeation chromatography. The thermal behavior and stability of fibers was measured by thermogravimetric analysis. The surface crystallinity of fibers was studied by Raman spectroscopy. The conductivity of fibers was measured by a multimeter. The surface morphology and dimensions of the fibers were examined by scanning electron microscopy.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Cyclization and Aryne Chemistry · Fiber-reinforced polymer composites · Synthesis and characterization of novel inorganic/organometallic compounds

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Sanders JE, Stiles CE, Hayes CL (2000) J Biomed Mater Res 52:23110.1002/1097-4636(200010)52:1<231::AID-JBM29>3.0.CO;2-E ↗
2. Clark H, Barbari TA, Stump K, Rao G (2000) J Biomed Mater Res 52:18310.1002/1097-4636(200010)52:1<183::AID-JBM24>3.0.CO;2-D ↗
3. Scott J (1981) Hollow fibers manufacture and applications. Noyes Data Corporation, New Jersey
4. Edie DD (1998) Carbon 36(4):34510.1016/S0008-6223(97)00185-1 ↗
5. Edie DD, Dunham MG (1989) Carbon 27(5):64710.1016/0008-6223(89)90198-X ↗
6. Miura K, Nakagawa H, Hashimoto K (1995) Carbon 33(3):27510.1016/0008-6223(94)00133-K ↗
7. Bergman RG (1973) Acc Chem Res 6:2510.1021/ar50061a004 ↗
8. Nicolaou KC, Dai WM (1991) Angew Chem Int Ed Engl 30:138710.1002/anie.199113873 ↗
9. (a) Lu TM, Moore JA (1997) Mater Res Soc Bull 22(10):28; (b) Moore JA, Lang CI, Lu TM, Yang GR (1995) Polym Mater Sci Eng (Am Chem Soc Div Polym Mater Sci Eng) 72:43710.1557/S0883769400034163 ↗
10. (a) John JA, Tour JM (1994) J Am Chem Soc 116:501110.1021/ja00090a066 ↗
11. (b) John JA, Tour JM (1997) Tetrahedron 53(45):1551510.1016/S0040-4020(97)00977-0 ↗
12. (c) Jones KM, Keller TM (1995) Polymer 36(1):18710.1016/0032-3861(95)90691-T ↗
13. (d) Grubbs RH, Kratz D (1993) Chem Ber 126:14910.1002/cber.19931260123 ↗
14. Smith DW Jr, Babb DA, Snelgrove RV, Townsend PH, Martin SJ (1998) J Am Chem Soc 120:907810.1021/ja981572a ↗
15. Shah H, Babb DA, Smith DW Jr (1999) Polym Mater Sci Eng (Am Chem Soc Div Polym Mater Sci Eng) 80:199
16. (a) Sonogashira K, Tohda Y, Hagihara N (1975) Tetrahedron Lett 50:446710.1016/S0040-4039(00)91094-3 ↗
17. (b) Takahashi S, Kuroyama Y, Sonogashira K, Hagihara N (1980) Synthesis 8:62710.1055/s-1980-29145 ↗
18. (c) Okita T, Isobe M (1995) Tetrahedron 51(13):373710.1016/0040-4020(95)00118-R ↗
19. Shah HV, Brittain ST, Huang Q, Hwu SJ, Whitesides GM, Smith DW Jr (1999) Chem Mater 11(10):262310.1021/cm9903780 ↗
20. Shah H, Babb DA, Smith DW Jr (2000) Polymer 41:441510.1016/S0032-3861(99)00699-0 ↗
21. Daniels F, Williams JW, Bender P, Alberty RA, Cornwell CD (1962) Experimental physical chemistry. McGraw-Hill Book Company, Inc., New York
22. Melanitis N, Tetlow PL, Galiotis C (1996) J Mater Sci 31:85110.1007/BF00352882 ↗
23. Fischbach DB, Couzi M (1986) Carbon 24(3):36510.1016/0008-6223(86)90239-3 ↗
24. Katagiri G, Ishida H, Ishitani A (1988) Carbon 26(4):56510.1016/0008-6223(88)90157-1 ↗
25. Ager JW, Veirs DK, Shamir J, Rosenblatt GM (1990) J Appl Phys 68(7):359810.1063/1.346320 ↗