journal article·2003-03

Effects of microstructure and environment on room-temperature tensile properties of B2-type polycrystalline CoTi intermetallic compound

Yasuyuki Kaneno, Takayuki Takasugi

Journal of Materials Science· Volume 38· Issue 5
Publisher page

Abstract

Room-temperature tensile property and fracture mode of B2-type polycrystalline CoTi intermetallic compound was studied as functions of microstructure and environment. Using a hot-rolled CoTi sheet, various microstructures were prepared by different heat treatments and pre-straining. Tensile elongation as well as ultimate tensile strength (UTS) of specimens deformed in vacuum (i.e. intrinsic tensile elongation and strength) depended on microstructure. The hot-rolled and recovered specimens showed higher elongation and tensile strength than the fully-annealed and aged specimens. Also, the pre-strained specimen showed the improved elongation and UTS in comparison with the fully-annealed specimen. On the other hand, tensile elongation and UTS of the specimens deformed in air were lower than those of the specimens deformed in vacuum, irrespective of microstructure. The extent of embrittlement was lower in the hot-rolled, recovered and pre-strained specimens than in the fully-annealed and aged specimens. SEM observation for the hot-rolled and recovered specimens showed that the quasi-cleavage fracture mode was dominant irrespective of testing environment. However, the fully-annealed, aged and pre-strained specimens consisting of recrystallized grains exhibited quasi-cleavage fracture mode mixed with intergranular fracture mode. The results showed that not only the intrinsic room-temperature tensile properties but also the environmental embrittlement of CoTi intermetallic compound depended upon lattice defects (such as dislocations and vacancies) in addition to grain size and morphology.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Intermetallics and Advanced Alloy Properties · High Temperature Alloys and Creep · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. T. Takasugi and O. Izumi, Phys. Stat. Sol. (a) 102 (1987) 697.10.1002/pssa.2211020230 ↗
2. Idem., J. Mater. Sci. 23 (1988) 1265.10.1007/BF01154589 ↗
3. Y. Kaneno, T. Takasugi and S.Hanada, Mater. Sci. Eng. A302 (2001) 215.10.1016/S0921-5093(00)01833-5 ↗
4. N. S. Stoloff and C. T. Liu, Intermetallics 2 (1994) 75.10.1016/0966-9795(94)90001-9 ↗
5. M. R. Hajaligol, S. C. Deevi, V. K. Sikka and C. R. Scorey, Mater. Sci. Eng. A258 (1998) 249.10.1016/S0921-5093(98)00941-1 ↗
6. D. J. Alexander, P. J.Maziasz and J. L. Wright, ibid. A258 (1998) 276.10.1016/S0921-5093(98)00945-9 ↗
7. A. Dollar, S. Dymek and M. Dollar, Archives of Metall. 47 (2002) 3.
8. T. Takasugi and O. Izumi, Acta Metall. 34 (1986) 607.10.1016/0001-6160(86)90176-8 ↗
9. T. Takasugi, H. Suenaga and O. Izumi, J. Mater. Sci. 26 (1991) 1179.10.1007/BF00544452 ↗
10. T. Takasugi, T. Nakayama and S. Hanada, Mater. Trans. JIM 34 (1993) 775.10.2320/matertrans1989.34.775 ↗
11. C. T. Liu, Scripta Metall. Mater. 27 (1992) 25.10.1016/0956-716X(92)90313-4 ↗
12. T. Takasugi and S. Hanada, Scripta Mater. 41 (1999) 175.10.1016/S1359-6462(99)00138-4 ↗
13. Y. Kaneno, M. Wada, H. Inoue and T. Takasugi, Mater. Trans. 42 (2001) 418.10.2320/matertrans.42.418 ↗
14. T. Takasugi, M. Wada, Y. Kaneno and H. Inoue, Mater. Sci. Eng. A, 329–331 (2002) 523.10.1016/S0921-5093(01)01503-9 ↗
15. C. T. Liu, E. H. Lee and C. G. Mckamey, Scripta Metall. 23 (1989) 875.10.1016/0036-9748(89)90263-9 ↗
16. R. J. Lynch, K. A. Gee and L. A. Heldt, ibid. 30 (1994) 945.10.1016/0956-716X(94)90420-0 ↗
17. M. V. Nathal and C. T. Liu, Intermetallics 3 (1995) 77.10.1016/0966-9795(94)P3689-L ↗
18. W. C. Luu and J. K. Wu, J. Mater. Sci. 35 (2000) 4121.10.1023/A:1004802824792 ↗
19. D. Wu and I. Baker, Intermetallics 9 (2001) 57.10.1016/S0966-9795(00)00097-2 ↗
20. T. Takasugi, K. Tsurisaki, O. Izumi and S. Ono, Philos. Mag. A 61 (1990) 785.10.1080/01418619008231948 ↗
21. T. Takasugi, M. Yoshida and T. Kawabata, ibid. A 65 (1992) 29.10.1080/01418619208201477 ↗
22. J. E. Hack, J. M. Brzeski and R. Darolia, Scripta Mater. 34 (1996) 1633.10.1016/1359-6462(96)00025-5 ↗
23. J. R. Knibloe, R. N. Wright, C. L. Trybus and V. K. Sikka, J. Mater. Sci. 28 (1993) 2040.10.1007/BF00367560 ↗
24. C. L. Ma, T. Takasugi and S. Hanada, Scripta Mater. 34 (1996) 1633.10.1016/1359-6462(96)00025-5 ↗
25. Idem., ibid. 34 (1996) 1131.10.1016/S0033-8389(22)00695-9 ↗
26. P. Nagpal and I. Baker, Metall. Trans. 21A (1990) 2281.10.1007/BF02647891 ↗
27. M. A. Morris, O. George and D. G. Morris, Mater. Sci. Eng. A258 (1998) 99.10.1016/S0921-5093(98)00922-8 ↗
28. H. Xiao and I. Baker, Acta metal. Mater. 43 (1995) 391.
29. C. L. Ma, T. Takasugi and S. Hanada, Mat. Res Soc. Symp. Proc. 364 (1995) 1159.