journal article·2001-09

Benefits of toughening a vinyl ester resin matrix on structural materials

P. J. Burchill, A. Kootsookos, M. Lau

Journal of Materials Science· Volume 36· Issue 17
Publisher page

Abstract

A commonplace vinyl ester resin blended with a core-shell polymer additive has been used as a matrix for some typical structural commercial materials to determine the benefits of increased matrix toughness. In a simulation of polymer concrete, the tougher matrix was found to increase the toughness of the concrete by a small amount. Unexpectedly the flexural strength was increased by 30% which has been ascribed to the greater damage tolerance of the matrix. In composites with fibre glass cloth, the interlaminar toughness is also improved. An application of extreme value statistics showed that the change in resin toughness due to blending was fully transferred to the composite, and also allowed an estimation of the effect of the reinforcement on toughness.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Epoxy Resin Curing Processes · Synthesis and properties of polymers · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. C. B. Bucknall, “Toughened Plastics” (Applied Science, London, 1977).10.1007/978-94-017-5349-4 ↗
2. A. A. Collyer, “Rubber Toughened Engineering Plastics” (Chapman & Hall, London, 1994).10.1007/978-94-011-1260-4 ↗
3. R. S. Drake and W. J. McCarthy, Rubber World 159(1) (1968) 51.
4. E. H. Rowe, A. R. Siebert and R. S. Drake, Mod.Plast. 47 (1970) 110.
5. J. N. Sultan and F. J. McGarry, Polym.Eng.Sci. 13 (1973) 29.10.1002/pen.760130105 ↗
6. A. C. Meeks, Polymer 15 (1974) 675.10.1016/0032-3861(74)90060-3 ↗
7. L. T. Manzione, J. K. Gillham and C. A. McPherson, J.Appl.Polym.Sci. 26 (1981) 907.10.1002/app.1981.070260314 ↗
8. S. Wu, Polym.Int. 29 (1992) 229.10.1002/pi.4990290313 ↗
9. R. Bagheri and R. A. Pearson, Polymer 37 (1996) 4529.10.1016/0032-3861(96)00295-9 ↗
10. P. C. Yang, E. P. Woo, M. T. Bishop, D. M. Pickelman and H. J. Sue, PMSE 63 (1990) 315.
11. H. J. Sue, J.Mater.Sci. 27 (1992) 3098.10.1007/BF01154125 ↗
12. H. J. Sue, E. I. Garcia-Meitin and N. A. Orchard, J.Polym.Sci.Part B, Polym.Phys. 31 (1993) 595.10.1002/polb.1993.090310511 ↗
13. F. Lu, H. H. Kausch, W. J. Cantwell and M. Fischer, J.Mater.Sci.Lett. 15 (1996) 1018.10.1007/BF00274893 ↗
14. G. Levita, A. Marchetti and A. Lazzeri, Makromol. Chem.Macromol.Symp. 41 (1991) 179.10.1002/masy.19910410115 ↗
15. R. A. Dickie and R. A. Pett, US Patent 3,652,722 (1972).
16. P. J. Burchill and P. J. Pearce, in “Polymeric Materials Encyclopedia,” edited by J. C. Salamone (CRC Press, New York, 1996) p. 2204.
17. I. Grabovac, P. J. Pearce and A. W. Camilleri, IUPAC Int.Symp.Polym. 91 (1991) 202.
18. J. S. Ullett and R. P. Chartoff, Polym.Eng.Sci. 35 (1995) 1086.10.1002/pen.760351304 ↗
19. E. Dreerman, M. Narkis, A. Siegmann, R. Joseph, H. Dodiuk and A. T. Dibenedetto, J.Appl.Polym.Sci. 72 (1999) 647.10.1002/(SICI)1097-4628(19990502)72:5<647::AID-APP5>3.0.CO;2-M ↗
20. S. Pham and P. J. Burchill, Polymer 36 (1995) 3279.10.1016/0032-3861(95)99426-U ↗
21. P. J. Burchill, Son Pham and M. Lau, unpublished results.
22. K. Roberts, P. J. Burchill, G. Simon and W. Cook, to be published.
23. W. D. Bascom, J. L. Bitner, R. J. Moulton and A. R. Siebert, Composites 11 (1980) 9.10.1016/0010-4361(80)90016-6 ↗
24. D. L. Hunston, Compos.Technol.Rev. 6 (1984) 176.10.1520/CTR10842J ↗
25. P. J. Burchill and G. J. Simpson, in Proceedings of ICCM-11, edited by M. L. Scott (1997) Vol. II, p. II-254.
26. R. M. German, “Particle Packing Characteristics” (Metal Powder Industries Foundation, Princeton, USA, 1989).
27. S. Hashemi, A. J. Kinloch and J. G. Williams, Proc.Royal Soc. A427 (1990) 173.
28. M. Rosensaft and G. Marom, J.Comp.Tech.Res. 10 (1988) 114.10.1520/CTR10138J ↗
29. M. F. Kanninen, Int.J.Fracture 9 (1973) 83.10.1007/BF00035958 ↗
30. J. G. Williams, J.Strain Anal. 24 (1989) 07.10.1243/03093247V244207 ↗
31. Annual Book of ASTM Standards, Vol. 03.01, ASTM E561-94, “Standard practice for R-Curve Determination.”
32. Anthony A. Willoughby, Stephen J. Garwood, in Elastic-Plastic Fracture: Second Symposium, Fracture resistance Curves and Engineering Applications, ASTM STP 803, edited by C. F. Shih and J. P. Gudas (American Society of Testing and Materials) Vol. II, p. II-372.
33. Annual Book of ASTM Standards,Vol 08.01, D790M-86, “Standard Test Method for Flexural properties of Unreinforced and Reinforced plastics and Electrical Insulating Materials.”
34. Wei-Hwang Lin, Ming-Hwa R. Jen and Fu-Sin Tzen, in Proceedings of the National Services Council, Republic of China, Part A: Physical Science and Engineering (1995) Vol. 19, No. 6, p. 582.
35. C. Vipulanandan, Polym.Eng.and Sci. 29 (1989) 1628.10.1002/pen.760292214 ↗
36. Idem., J.Appl.Polym.Sci. 41 (1990) 751.10.1002/app.1990.070410322 ↗
37. N. Dharmarajan and C. Vipulanandan, ibid. 42 (1991) 601.10.1002/app.1991.070420306 ↗
38. N. Amdouni, H. Sautereau, J. F. Gerard, F. Fernagut, G. Coulon and J. M. Lefebvre, J.Mater.Sci. 25 (1990) 1435.10.1007/BF00585462 ↗
39. A. C. Moloney, H. H. Kausch, T. Kaiser and H. R. Beer, J.Mater.Sci. 22 (1987) 381.10.1007/BF01160743 ↗
40. J. X. Li, M. Silverstein, A. Hiltner and E. Baer, J.Appl.Polym.Sci. 52 (1994) 255.10.1002/app.1994.070520212 ↗
41. S. Mebarkia, C. Vipulanandan, Polym.Eng.and Sci. 34 (1994) 1287.10.1002/pen.760341609 ↗
42. William D. Callister Jr., “Materials Science and Engineering: An Introduction” (John Wiley and Sons, Inc, New York, 1985) p. 399.
43. N. F. Macdonald and C. E. Ransley, Special Report No. 58 of the iron and Steel Institute of London, 1954.
44. B. Paul, Trans.Metall.Soc.AIME 218 (1960) 36.
45. X. N. Huang and D. Hull, Compos.Sci.Technol. 35 (1989) 283.10.1016/0266-3538(89)90040-7 ↗
46. J. M. Slepetz and L. Carlson, in “Fracture Mechanics of Composites,” ASTM Special Technical Pub. 593 (1975) 143.10.1520/STP34796S ↗
47. E. J. Gumbel, 'Statistics of Extremes,' Columbia University Press, New York (1966).
48. N. R. Mann, R. E. Schafer and N. D. Singpurwalla, “Methods for Statistical Analysis of Reliability and Life Data” (JohnWiley and Sons, New York, 1974).