YNbO4-addition on the fracture toughness of ZrO2(3Y) ceramics
Source abstract
Abstract
Effect of YNbO4 addition on the fracture toughness and stress-strain characteristics of ZrO2(3Y) ceramics was investigated using micro-indentation, X-ray diffractometry and in-situ compression-diffraction techniques in the present work. X-ray diffraction patterns show that sintering of YNbO4 and ZrO2(3Y) mixture results in formation of a solid solution, and the tetragonality of ZrO2(3Y) ceramics increases with the content of YNbO4. The ratio of 002t to 200t peak intensity in X-ray diffraction spectra of the specimens changes significantly after a grinding process at low fractions of YNbO4 (less than 5 mol%) and approaches to a constant value as the content of YNbO4 is higher than 5 mol%, implying that the addition of YNbO4 reduces the domain switchability of the ZrO2(3Y) ceramics. Fracture toughness of modified-ZrO2(3Y) specimens with the same heat treatment conditions could be greatly enhanced by an appropriate addition of YNbO4. In addition, stress-strain curves of YNbO4-modified ZrO2(3Y) specimens exhibit an extraordinary elastic behavior. Data of in-situ loading-diffraction experiment show that an unidentified stress-induced transformation occurs and the peak intensity varies with the stress conditions. Analysis of the stress-strain characteristics and X-ray diffraction results suggest that the fracture toughness of the specimens cannot be simply attributed to the t-to-m phase transformation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Nuclear materials and radiation effects · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. R. C. Garvie, R. H. Hannink and R. T. Pascoe, Nature 258 (1975) 703.10.1038/258703a0 ↗
2. R. C Garvie and P. S. Nicholson, J. Amer. Ceram. Soc. 55 (1972) 152.10.1111/j.1151-2916.1972.tb11241.x ↗
3. A. G. Evans and R. M. Cannon, Acta Metall. 34 (1986) 761.10.1016/0001-6160(86)90052-0 ↗
4. F. F. Lange, J. Mater. Sci. 17 (1982) 255.10.1007/BF00809061 ↗
5. D. L. Porter and A. H. Heuer, J. Amer. Ceram. Soc. 60 (1977) 83.10.1111/j.1151-2916.1977.tb16104.x ↗
6. Idem., ibid. 62 (1979) 298.10.2307/3493983 ↗
7. A. H. Heuer, N. Claussen, W. M. Kriven and M. Ruhle, J. Amer. Ceram. Soc. 65 (1982) 642.10.1111/j.1151-2916.1982.tb09946.x ↗
8. A. H. Heuer and M. Ruhle, in “Science and Technology of Zirconia II,” edited by N. Claussen, M. Ruhle and A. H. Heuer (American Ceramic Society, Columbus, OH, 1984) p. 1.
9. E. Stevens, in “Zirconia and Zirconia Ceramics” (Magnesium Elektron, Flemington, New Jersey, 1986) p. 1.
10. A. H. Heuer and M. Ruhle, in “Advances in Ceramics” Vol. 12, Science and Technology of Zirconia II, edited by N. Claussen, M. Ruhle and A. H. Heuer (American Ceramic Society, Columbus, OH, 1984) p. 137.
11. A. V. Virkar and R. L. K. Matsumoto, J. Amer. Ceram. Soc. 69 (1986) C-224.10.1111/j.1151-2916.1986.tb07341.x ↗
12. A. V. Irkar and R. L. K. Matsumoto, in “Science and Technology of Zirconia III,” edited by S. Somiya, N. Yamamoto and H. Yanagida (American Ceramic Society, Westerville, OH, 1988) p. 653.
13. C. J. Chan, F. F. Lange, M. Ruhle, J. F. Jue and A. V. Vikar, J. Amer. Ceram. Soc. 74 (1991) 807.10.1111/j.1151-2916.1991.tb06929.x ↗
14. R. P. Ingel, D. Lewis, B. A. Bender and R. W. Rice, in “Science and Technology of Zirconia II,” edited by N. Claussen, M. Ruhle and A. H. Heuer (American Ceramic Society, Columbus, OH, 1984) p. 408.
15. R. P. Ingel, D. Lewis, B. A. Bender and R. W. Rice, J. Amer. Ceram. Soc. 65 (1982) C-150.10.1111/j.1151-2916.1982.tb10523.x ↗
16. D. Michel, L. Mazerolles and M. P. Jorba, J. Mater. Sci. 18 (1983) 2618.10.1007/BF00547578 ↗
17. D. Michel, L. Mazerollesand M. P. Jorba, in “Science and Technology of Zirconia II,” edited by N. Claussen, M. Ruhle and A. H. Heuer (American Ceramic Society, Columbus, OH, 1984) p. 131.
18. T. Tsukuma, Y. Kubota and T. Tsukidate, in “Science and Technology of Zirconia II,” edited by N. Claussen, M. Ruhle and A. H. Heuer (American Ceramic Society, Columbus, OH, 1984) p. 382.
19. K. Mehta, J. F. Jue and A. V. Virkar, J. Amer. Ceram. Soc. 73 (1990) 1777.10.1111/j.1151-2916.1990.tb09832.x ↗
20. M. G. Cain and M. H. Lewis, Mater. Lett. 9 (1990) 309.10.1016/0167-577X(90)90167-K ↗
21. G. V. Srinivasan, J. F. Jue, S. Y. Kuo and A. V. Virkar, J. Amer. Ceram. Soc. 72 (1989) 2098.10.1111/j.1151-2916.1989.tb06038.x ↗
22. A. Saiki and N. Mizutani, Trans. Mat. Soc. Jpn. 14A (1994) 451.
23. J. Lankford, R. A. Page and L. Rabenberg, J. Mater. Sci. 23 (1988) 4144.10.1007/BF01106850 ↗
24. K. Mehta and A. V. Virkar, J. Amer. Ceram. Soc. 73 (1990) 567.10.1111/j.1151-2916.1990.tb06554.x ↗
25. V. S. Stubican, ibid. 47 (1964) 55.10.1111/j.1151-2916.1964.tb15654.x ↗
26. P. Li, I. W. Chen and J. E. Penner-hahn, ibid. 77 (1994) 1289.10.1111/j.1151-2916.1994.tb05404.x ↗
27. T. D. Ketcham, U. S. Patent 5008221 (1991).
28. T. Sato and M. Shimada, J. Amer. Ceram. Soc. 68 (1985) 356.10.1111/j.1151-2916.1985.tb15239.x ↗
29. C. Howard and R. J. Hill, J. Mater. Sci. 26 (1991) 127.10.1007/BF00576042 ↗
30. P. Li, I. W. Chen and J. E. Penner-hahn, J. Amer. Ceram. Soc. 77 (1994) 118.10.1111/j.1151-2916.1994.tb06964.x ↗
31. P. Li, I. W. Chen and J. E. Penner-hahn, ibid. 77 (1994) 1281.10.1111/j.1151-2916.1994.tb05403.x ↗
32. D. J. Kim, ibid. 73 (1990) 115.10.1111/j.1151-2916.1990.tb05100.x ↗
33. D. J. Kim, P. F. Becher and C. R. Hubbard, ibid. 76 (1993) 2904.10.1111/j.1151-2916.1993.tb04035.x ↗
34. M. V. Swain, J. Mater. Sci. Letter 5 (1986) 1159.10.1007/BF01742233 ↗
35. P. F. Becher, J. Amer. Ceram. Soc. 75 (1992) 493.10.1111/j.1151-2916.1992.tb07832.x ↗
36. K. Otsuka and K. Shimizu, Metals Forum. 73 (1981) 142, and references therein.
37. J. Li and C. M. Wayman, J. Amer. Ceram. Soc. 80 (1997) 803.10.1111/j.1151-2916.1997.tb02905.x ↗
38. T. L. Baker, K. T. Faber and D. W. Readey, ibid. 74 (1991) 1619.10.1111/j.1151-2916.1991.tb07148.x ↗
39. V. K. Wadhawan, Phase Transitions. 3 (1982) 3.10.1080/01411598208241323 ↗
40. T. A. Bielicki, U. Dahmen, G. Thomas and K. Westmacott, in “Science and Technology of Zirconia III,” edited by S. Somiya, N. Yamamoto and H. Yanagida (American Ceramic Society, Westerville, OH, 1988) p. 485.
41. B. C. Muddle and R. H. J. Hannink, in “Science and Technology of Zirconia III,” edited by S. Somiya, N. Yamamoto and H. Yanagida (American Ceramic Society, Westerville, OH, 1988) p. 89.
42. H. Hasegawa, J. Mater. Sci. Lett. 2 (1983) 91.10.1007/BF00722220 ↗